On Wed, Aug 14, 2019 at 11:42:53AM -0300, Francisco Ferreiro wrote: > Hi guys, this is me trying to setup a tp-link TL-MR3420 with OpenWRT > with a huawei E353 usb dongle > > hopefully I will try to setup a multiwan along with this two more > sources to get redundant access to internet > - a cell phone (either tethering or if possible via USB (*)) > - a fiber based dsl service accesible via ethernet. > > after flashing the OpenWRT and setting up a little bit I made the > dongle work manually (via ttyUSB0) (log below) but cant get it to > automatically start connected from boot up > > help with this dongle and maybe with this (*) one too, would be highly > appreciated > have some logs below > and let me know if you need something else > > thanks in advance for your help > best > Franco > > [ 25.113754] usb 1-1: new high-speed USB device number 3 using ehci-platform > [ 25.327869] usbserial_generic 1-1:1.0: The "generic" usb-serial > driver is only for testing and one-off prototypes. > [ 25.338456] usbserial_generic 1-1:1.0: Tell > linux-usb@xxxxxxxxxxxxxxx to add your device to a proper driver. This really is not the proper driver for this device. Why are you forcing it to use the generic one and not a "real" driver? > [ 25.348448] usbserial_generic 1-1:1.0: generic converter detected > [ 25.354938] usb 1-1: generic converter now attached to ttyUSB0 > [ 25.361410] usbserial_generic 1-1:1.1: The "generic" usb-serial > driver is only for testing and one-off prototypes. > [ 25.371975] usbserial_generic 1-1:1.1: Tell > linux-usb@xxxxxxxxxxxxxxx to add your device to a proper driver. > [ 25.381965] usbserial_generic 1-1:1.1: device has no bulk endpoints > [ 25.388921] usbserial_generic 1-1:1.2: The "generic" usb-serial > driver is only for testing and one-off prototypes. > [ 25.399477] usbserial_generic 1-1:1.2: Tell > linux-usb@xxxxxxxxxxxxxxx to add your device to a proper driver. > [ 25.409453] usbserial_generic 1-1:1.2: generic converter detected > [ 25.415898] usb 1-1: generic converter now attached to ttyUSB1 > [ 25.422331] usbserial_generic 1-1:1.3: The "generic" usb-serial > driver is only for testing and one-off prototypes. > [ 25.432887] usbserial_generic 1-1:1.3: Tell > linux-usb@xxxxxxxxxxxxxxx to add your device to a proper driver. > [ 25.442869] usbserial_generic 1-1:1.3: generic converter detected > [ 25.449323] usb 1-1: generic converter now attached to ttyUSB2 > [ 25.455865] usb-storage 1-1:1.4: USB Mass Storage device detected > [ 25.923729] scsi host0: usb-storage 1-1:1.4 > [ 25.928826] usb-storage 1-1:1.5: USB Mass Storage device detected > [ 25.983950] scsi host1: usb-storage 1-1:1.5 > [ 26.986403] scsi 0:0:0:0: CD-ROM HUAWEI Mass Storage > 2.31 PQ: 0 ANSI: 2 > [ 27.074885] scsi 1:0:0:0: Direct-Access HUAWEI SD Storage > 2.31 PQ: 0 ANSI: 2 > [ 27.089310] sd 1:0:0:0: [sda] Attached SCSI removable disk Did you run the usb-switch program (or whatever that thing is called that toggles devices out of mass-storage mode back into modem mode), on this device? That should solve this issue, right? thanks, greg k-h
