All preparation work is done, so the platform can finally be moved into ARCH_MULTIPLATFORM. This requires a small change to the defconfig file to enable the platform. Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx> --- arch/arm/Kconfig | 17 +------ arch/arm/configs/lpc32xx_defconfig | 1 + arch/arm/mach-lpc32xx/Kconfig | 11 +++++ .../mach-lpc32xx/include/mach/uncompress.h | 48 ------------------- 4 files changed, 14 insertions(+), 63 deletions(-) create mode 100644 arch/arm/mach-lpc32xx/Kconfig delete mode 100644 arch/arm/mach-lpc32xx/include/mach/uncompress.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 33b00579beff..65808e17cb3b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -478,21 +478,6 @@ config ARCH_W90X900 <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/ ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller> -config ARCH_LPC32XX - bool "NXP LPC32XX" - select ARM_AMBA - select CLKDEV_LOOKUP - select CLKSRC_LPC32XX - select COMMON_CLK - select CPU_ARM926T - select GENERIC_CLOCKEVENTS - select GENERIC_IRQ_MULTI_HANDLER - select GPIOLIB - select SPARSE_IRQ - select USE_OF - help - Support for the NXP LPC32XX family of processors - config ARCH_PXA bool "PXA2xx/PXA3xx-based" depends on MMU @@ -746,6 +731,8 @@ source "arch/arm/mach-keystone/Kconfig" source "arch/arm/mach-ks8695/Kconfig" +source "arch/arm/mach-lpc32xx/Kconfig" + source "arch/arm/mach-mediatek/Kconfig" source "arch/arm/mach-meson/Kconfig" diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig index 0cdc6c7974b3..2d75bd8dbaf0 100644 --- a/arch/arm/configs/lpc32xx_defconfig +++ b/arch/arm/configs/lpc32xx_defconfig @@ -12,6 +12,7 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL_SYSCALL=y CONFIG_EMBEDDED=y CONFIG_SLAB=y +# CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_LPC32XX=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 diff --git a/arch/arm/mach-lpc32xx/Kconfig b/arch/arm/mach-lpc32xx/Kconfig new file mode 100644 index 000000000000..ec87c65f4536 --- /dev/null +++ b/arch/arm/mach-lpc32xx/Kconfig @@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0-only + +config ARCH_LPC32XX + bool "NXP LPC32XX" + depends on ARCH_MULTI_V5 + select ARM_AMBA + select CLKSRC_LPC32XX + select CPU_ARM926T + select GPIOLIB + help + Support for the NXP LPC32XX family of processors diff --git a/arch/arm/mach-lpc32xx/include/mach/uncompress.h b/arch/arm/mach-lpc32xx/include/mach/uncompress.h deleted file mode 100644 index 74b7aa0da0e4..000000000000 --- a/arch/arm/mach-lpc32xx/include/mach/uncompress.h +++ /dev/null @@ -1,48 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * arch/arm/mach-lpc32xx/include/mach/uncompress.h - * - * Author: Kevin Wells <kevin.wells@xxxxxxx> - * - * Copyright (C) 2010 NXP Semiconductors - */ - -#ifndef __ASM_ARM_ARCH_UNCOMPRESS_H -#define __ASM_ARM_ARCH_UNCOMPRESS_H - -#include <linux/io.h> - -/* - * Uncompress output is hardcoded to standard UART 5 - */ - -#define UART_FIFO_CTL_TX_RESET (1 << 2) -#define UART_STATUS_TX_MT (1 << 6) -#define LPC32XX_UART5_BASE 0x40090000 - -#define _UARTREG(x) (void __iomem *)(LPC32XX_UART5_BASE + (x)) - -#define LPC32XX_UART_DLLFIFO_O 0x00 -#define LPC32XX_UART_IIRFCR_O 0x08 -#define LPC32XX_UART_LSR_O 0x14 - -static inline void putc(int ch) -{ - /* Wait for transmit FIFO to empty */ - while ((__raw_readl(_UARTREG(LPC32XX_UART_LSR_O)) & - UART_STATUS_TX_MT) == 0) - ; - - __raw_writel((u32) ch, _UARTREG(LPC32XX_UART_DLLFIFO_O)); -} - -static inline void flush(void) -{ - __raw_writel(__raw_readl(_UARTREG(LPC32XX_UART_IIRFCR_O)) | - UART_FIFO_CTL_TX_RESET, _UARTREG(LPC32XX_UART_IIRFCR_O)); -} - -/* NULL functions; we don't presently need them */ -#define arch_decomp_setup() - -#endif -- 2.20.0
