Re: [Bugme-new] [Bug 13335] New: USB portable hdd taking 10 - more than 30 minutes to detect

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



It mounted after 4 hours.
One thing I noticed is that, during all these time it was trying
different addresses with ehci_hcd and it mounted in the first try with
uhci_hcd.

On Fri, May 29, 2009 at 11:06 AM, Jithin Emmanuel <jithin1987@xxxxxxxxx> wrote:
> Things are especially worse when I am in office. Now its almost 2
> hours this message is getting printed still no signs of getting ready
> to mount. I do not why why thing are very bad at office and not very
> much at home. Differences are A/C and docking station.
>
> On Fri, May 29, 2009 at 9:42 AM, Jithin Emmanuel <jithin1987@xxxxxxxxx> wrote:
>> I checked with 2.6.27 kernel. Its not working. I am getting the same
>> message printed again and again. If its a problem with the hardware
>> itself, whcy its working after some 20-30 minutes,  ( and sometimes by
>> uhci).
>>
>> I have seen this working with ehci in my box with the docking station.
>>
>> On Fri, May 29, 2009 at 6:51 AM, Jithin Emmanuel <jithin1987@xxxxxxxxx> wrote:
>>> Yes when using docking station it fails over to uhci and when not it mostly
>>> uses ehci. I have seen it using even uhci when not in docking station. In a
>>> 2.6.27 kernel I saw it using ehci even with docking station.
>>>
>>> What annoys most is the time taken to appear as ready to mount some times it
>>> takes up to 30 mins.
>>>
>>> But if I connect it during boot it gets detected fast, mostly after login
>>> though it keeps printing those error messages.
>>>
>>> I will check again with other laptops with different kernels.
>>>
>>> On Thu, May 28, 2009 at 9:23 PM, Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
>>> wrote:
>>>>
>>>> On Wed, 27 May 2009, Andrew Morton wrote:
>>>>
>>>> > (switched to email.  Please respond via emailed reply-to-all, not via
>>>> > the
>>>> > bugzilla web interface).
>>>> >
>>>> > On Mon, 18 May 2009 08:37:42 GMT bugzilla-daemon@xxxxxxxxxxxxxxxxxxx
>>>> > wrote:
>>>> >
>>>> > > http://bugzilla.kernel.org/show_bug.cgi?id=13335
>>>> > >
>>>> > >            Summary: USB portable hdd taking 10 - more than 30 minutes
>>>> > > to
>>>> > >                     detect
>>>>
>>>> > > In the mean time I am seeing these in /var/log/syslog
>>>> > >
>>>> > > May 18 13:55:53 grainlead-lx kernel: [  416.713368] hub 2-0:1.0:
>>>> > > unable to
>>>> > > enumerate USB device on port 5
>>>> > > May 18 13:55:53 grainlead-lx kernel: [  416.900361] hub 2-0:1.0:
>>>> > > unable to
>>>> > > enumerate USB device on port 5
>>>>
>>>> (Two of those are enough to get the idea across.  Including 100 of them
>>>> doesn't really add much new information...)
>>>>
>>>> > > I am using a docking station with my laptop compaq 6910p, when using
>>>> > > docking
>>>> > > station it gets detected with uhci_hcd, so getting on USB 1.1 speed.
>>>> > > When not
>>>> > > using docking station it gets detected with ehci_hcd .
>>>>
>>>> Does this mean the drive works okay with EHCI when the laptop isn't
>>>> docked but fails over to UHCI when it is docked?
>>>>
>>>> > > This is an apollo imation portable drive which used to work fine
>>>> > > before 2.6.28
>>>> > > kernel.
>>>>
>>>> You mean it used to work with EHCI even when the laptop was docked?
>>>>
>>>> > > This is the case with 2.6.28 and 29 kernel with 2.6.30-rc5 Its not
>>>> > > mounting at
>>>> > > all. It just keeps printing
>>>> > >
>>>> > > hub 2-0:1.0: unable to enumerate USB device on port
>>>> > >
>>>> > > It could also be a device problem. I am dual booting with windows,
>>>> > > when
>>>> > > connecting under windows, though it mounts immediately its mounting as
>>>> > > usb 1.1
>>>> > > with a message connect to a high speed device
>>>>
>>>> Have you tried going back to a pre-2.6.28 kernel to see if it still
>>>> works?  Maybe something in the docking station broke when you upgraded.
>>>>
>>>> Alan Stern
>>>>
>>>>
>>>
>>>
>>>
>>> --
>>> Regards
>>> Jithin Emmanuel
>>> http://spotm.in
>>> Bette Davis  - "Brought up to respect the conventions, love had to end in
>>> marriage. I'm afraid it did."
>>
>>
>>
>> --
>> Regards
>> Jithin Emmanuel
>> http://spotm.in
>> Helen Rowland  - "One man's folly is another man's wife." -
>> http://www.brainyquote.com/quotes/authors/h/helen_rowland.html
>>
>
>
>
> --
> Regards
> Jithin Emmanuel
> http://spotm.in
> W. C. Fields  - "I am free of all prejudices. I hate every one
> equally." - http://www.brainyquote.com/quotes/authors/w/w_c_fields.html
>



-- 
Regards
Jithin Emmanuel
http://spotm.in
Groucho Marx  - "A hospital bed is a parked taxi with the meter
running." - http://www.brainyquote.com/quotes/authors/g/groucho_marx.html
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux