Hi Felipe,
at 3:23 PM, Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx> wrote:
Hi,
Oliver Neukum <oneukum@xxxxxxxx> writes:
Am Dienstag, den 09.07.2019, 21:10 +0800 schrieb Kai-Heng Feng:
Hi Mika and Mathias,
I’ve filed a bug [1] which renders docking station unusable.
I am not sure it's a bug in PCI, Thunderbolt or xHCI so raise the issue
to
you both.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=203885
Kai-Heng
The issue starts before you unplug. In fact it starts before
the dock is even detected the first time:
[ 13.171167] rfkill: input handler disabled
[ 19.781905] pcieport 0000:00:1c.0: PME: Spurious native interrupt!
[ 19.781909] pcieport 0000:00:1c.0: PME: Spurious native interrupt!
[ 20.109251] usb 4-1: new SuperSpeedPlus Gen 2 USB device number 2
using xhci_hcd
[ 20.136000] usb 4-1: New USB device found, idVendor=0bda,
idProduct=0487, bcdDevice= 1.47
[ 20.136004] usb 4-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 20.136007] usb 4-1: Product: Dell dock
[ 20.136009] usb 4-1: Manufacturer: Dell Inc.
[ 20.140607] hub 4-1:1.0: USB hub found
[ 20.141004] hub 4-1:1.0: 4 ports detected
[ 20.253025] usb 1-4: new high-speed USB device number 5 using xhci_hcd
[ 20.403520] usb 1-4: New USB device found, idVendor=0bda,
idProduct=5487, bcdDevice= 1.47
[ 20.403521] usb 1-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 20.403522] usb 1-4: Product: Dell dock
[ 20.403522] usb 1-4: Manufacturer: Dell Inc.
[ 20.404348] hub 1-4:1.0: USB hub found
This looks like a PCI issue.
In general, this kind of reporting sucks. We have to guess what you did
at 19.781905
It might be nice to know which device is generating that and why it's
not found. This may help:
diff --git a/drivers/pci/pcie/pme.c b/drivers/pci/pcie/pme.c
index f38e6c19dd50..33285ef29362 100644
--- a/drivers/pci/pcie/pme.c
+++ b/drivers/pci/pcie/pme.c
@@ -203,7 +203,7 @@ static void pcie_pme_handle_request(struct pci_dev
*port, u16 req_id)
out:
if (!found)
- pci_info(port, "Spurious native interrupt!\n");
+ pci_info(port, "Spurious native interrupt! (Bus# %d DevFn
%d)\n", busnr, devfn);
}
/**
Also, according to what Kai-Heng said, xHCI stops working even after
repluggin the Dock. We could be dealing with two bugs here:
1. Spurious PME event being generated by an unexistent device
2. xHCI not handling hot-plug very well
Kai-Heng,
please run your tests again and make note of when you unplugged the dock
and when you replugged it so we can correlate the time stampts with what
you have done otherwise we will never be able to pin-point what's going
on.
I upgraded the system firmware, TBT firmware and docking station firmware
to latest, and used latest mainline kernel.
Now the issue can be reproduced at the very first time I plugged the
docking station.
Attach dmesg to BKO since there are lots of message after XHCI dyndbg is
enabled.
Kai-Heng
cheers
--
balbi
