This bit should be only set when the port enable goes down, for example, on errors. Not when it gets set after a port reset. Some USB stacks seem to be sensitive to this and fails enumeration. Signed-off-by: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx> --- drivers/usb/gadget/udc/aspeed-vhub/hub.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc/aspeed-vhub/hub.c b/drivers/usb/gadget/udc/aspeed-vhub/hub.c index 7c040f56100e..0755115fd90d 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/hub.c +++ b/drivers/usb/gadget/udc/aspeed-vhub/hub.c @@ -449,8 +449,15 @@ static void ast_vhub_change_port_stat(struct ast_vhub *vhub, USB_PORT_STAT_C_OVERCURRENT | USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_L1; - p->change |= chg; + /* + * We only set USB_PORT_STAT_C_ENABLE if we are disabling + * the port as per USB spec, otherwise MacOS gets upset + */ + if (p->status & USB_PORT_STAT_ENABLE) + chg &= ~USB_PORT_STAT_C_ENABLE; + + p->change = chg; ast_vhub_update_hub_ep1(vhub, port); } } -- 2.17.1
