At imx7ulp, the USB related analog register is located in PHY register region too, so we need to control PLL at PHY driver directly. Signed-off-by: Peter Chen <peter.chen@xxxxxxx> --- drivers/usb/phy/phy-mxs-usb.c | 67 ++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 66 insertions(+), 1 deletion(-) diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index 6fa16ab31e2e..70b8c8248caf 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -17,9 +17,11 @@ #include <linux/of_device.h> #include <linux/regmap.h> #include <linux/mfd/syscon.h> +#include <linux/iopoll.h> #define DRIVER_NAME "mxs_phy" +/* Register Macro */ #define HW_USBPHY_PWD 0x00 #define HW_USBPHY_TX 0x10 #define HW_USBPHY_CTRL 0x30 @@ -37,6 +39,11 @@ #define GM_USBPHY_TX_TXCAL45DN(x) (((x) & 0xf) << 8) #define GM_USBPHY_TX_D_CAL(x) (((x) & 0xf) << 0) +/* imx7ulp */ +#define HW_USBPHY_PLL_SIC 0xa0 +#define HW_USBPHY_PLL_SIC_SET 0xa4 +#define HW_USBPHY_PLL_SIC_CLR 0xa8 + #define BM_USBPHY_CTRL_SFTRST BIT(31) #define BM_USBPHY_CTRL_CLKGATE BIT(30) #define BM_USBPHY_CTRL_OTG_ID_VALUE BIT(27) @@ -55,6 +62,12 @@ #define BM_USBPHY_IP_FIX (BIT(17) | BIT(18)) #define BM_USBPHY_DEBUG_CLKGATE BIT(30) +/* imx7ulp */ +#define BM_USBPHY_PLL_LOCK BIT(31) +#define BM_USBPHY_PLL_REG_ENABLE BIT(21) +#define BM_USBPHY_PLL_BYPASS BIT(16) +#define BM_USBPHY_PLL_POWER BIT(12) +#define BM_USBPHY_PLL_EN_USB_CLKS BIT(6) /* Anatop Registers */ #define ANADIG_ANA_MISC0 0x150 @@ -168,6 +181,9 @@ static const struct mxs_phy_data imx6ul_phy_data = { .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS, }; +static const struct mxs_phy_data imx7ulp_phy_data = { +}; + static const struct of_device_id mxs_phy_dt_ids[] = { { .compatible = "fsl,imx6sx-usbphy", .data = &imx6sx_phy_data, }, { .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, }, @@ -175,6 +191,7 @@ static const struct of_device_id mxs_phy_dt_ids[] = { { .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, }, { .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, }, { .compatible = "fsl,imx6ul-usbphy", .data = &imx6ul_phy_data, }, + { .compatible = "fsl,imx7ulp-usbphy", .data = &imx7ulp_phy_data, }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); @@ -199,6 +216,11 @@ static inline bool is_imx6sl_phy(struct mxs_phy *mxs_phy) return mxs_phy->data == &imx6sl_phy_data; } +static inline bool is_imx7ulp_phy(struct mxs_phy *mxs_phy) +{ + return mxs_phy->data == &imx7ulp_phy_data; +} + /* * PHY needs some 32K cycles to switch from 32K clock to * bus (such as AHB/AXI, etc) clock. @@ -222,14 +244,49 @@ static void mxs_phy_tx_init(struct mxs_phy *mxs_phy) } } +static int mxs_phy_pll_enable(void __iomem *base, bool enable) +{ + int ret = 0; + + if (enable) { + u32 value; + + writel(BM_USBPHY_PLL_REG_ENABLE, base + HW_USBPHY_PLL_SIC_SET); + writel(BM_USBPHY_PLL_BYPASS, base + HW_USBPHY_PLL_SIC_CLR); + writel(BM_USBPHY_PLL_POWER, base + HW_USBPHY_PLL_SIC_SET); + ret = readl_poll_timeout(base + HW_USBPHY_PLL_SIC, + value, (value & BM_USBPHY_PLL_LOCK) != 0, + 100, 10000); + if (ret) + return ret; + + writel(BM_USBPHY_PLL_EN_USB_CLKS, base + + HW_USBPHY_PLL_SIC_SET); + } else { + writel(BM_USBPHY_PLL_EN_USB_CLKS, base + + HW_USBPHY_PLL_SIC_CLR); + writel(BM_USBPHY_PLL_POWER, base + HW_USBPHY_PLL_SIC_CLR); + writel(BM_USBPHY_PLL_BYPASS, base + HW_USBPHY_PLL_SIC_SET); + writel(BM_USBPHY_PLL_REG_ENABLE, base + HW_USBPHY_PLL_SIC_CLR); + } + + return ret; +} + static int mxs_phy_hw_init(struct mxs_phy *mxs_phy) { int ret; void __iomem *base = mxs_phy->phy.io_priv; + if (is_imx7ulp_phy(mxs_phy)) { + ret = mxs_phy_pll_enable(base, true); + if (ret) + return ret; + } + ret = stmp_reset_block(base + HW_USBPHY_CTRL); if (ret) - return ret; + goto disable_pll; /* Power up the PHY */ writel(0, base + HW_USBPHY_PWD); @@ -267,6 +324,11 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy) mxs_phy_tx_init(mxs_phy); return 0; + +disable_pll: + if (is_imx7ulp_phy(mxs_phy)) + mxs_phy_pll_enable(base, false); + return ret; } /* Return true if the vbus is there */ @@ -388,6 +450,9 @@ static void mxs_phy_shutdown(struct usb_phy *phy) writel(BM_USBPHY_CTRL_CLKGATE, phy->io_priv + HW_USBPHY_CTRL_SET); + if (is_imx7ulp_phy(mxs_phy)) + mxs_phy_pll_enable(phy->io_priv, false); + clk_disable_unprepare(mxs_phy->clk); } -- 2.14.1