If BLIST_TRY_VPD_PAGES is set for a device, even for an USB, it should be honored, so only set skip_vpd_pages is try_vpd_pages is not set. Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@xxxxxxxxx> Acked-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> --- Changes from v1: changed the check of try_vpd_pages from: sdev->try_vpd_pages == 0; to: !sdev->try_vpd_pages; (as suggested by Alan Stern) drivers/usb/storage/scsiglue.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 59190d88fa9f..30790240aec6 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -195,8 +195,11 @@ static int slave_configure(struct scsi_device *sdev) */ sdev->skip_ms_page_8 = 1; - /* Some devices don't handle VPD pages correctly */ - sdev->skip_vpd_pages = 1; + /* + * Some devices don't handle VPD pages correctly, so skip vpd + * pages if not forced by SCSI layer. + */ + sdev->skip_vpd_pages = !sdev->try_vpd_pages; /* Do not attempt to use REPORT SUPPORTED OPERATION CODES */ sdev->no_report_opcodes = 1; -- 2.21.0
