On Tue, 18 Jun 2019, Suwan Kim wrote:
> vhci doesn’t do dma for remote device. Actually, the real dma
> operation is done by network card driver. So, vhci doesn’t use and
> need dma address of transfer buffer of urb.
>
> But hcd provides dma mapping function by defualt in usb_hcd_submit_urb()
> and it causes unnecessary dma mapping which will be done again at
> NIC driver and it wastes CPU cycles. So, implement map_urb_for_dma
> function for vhci in order to skip the dma mapping procedure.
>
> Signed-off-by: Suwan Kim <suwan.kim027@xxxxxxxxx>
> ---
> drivers/usb/usbip/vhci_hcd.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
> index 667d9c0ec905..9df4d9e36788 100644
> --- a/drivers/usb/usbip/vhci_hcd.c
> +++ b/drivers/usb/usbip/vhci_hcd.c
> @@ -1287,6 +1287,13 @@ static int vhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
> return 0;
> }
>
> +static int vhci_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
> + gfp_t mem_flags)
> +{
> + dev_dbg(hcd->self.controller, "vhci does not map urb for dma\n");
> + return 0;
> +}
> +
> static const struct hc_driver vhci_hc_driver = {
> .description = driver_name,
> .product_desc = driver_desc,
> @@ -1302,6 +1309,7 @@ static const struct hc_driver vhci_hc_driver = {
> .urb_dequeue = vhci_urb_dequeue,
>
> .get_frame_number = vhci_get_frame_number,
> + .map_urb_for_dma = vhci_map_urb_for_dma,
>
> .hub_status_data = vhci_hub_status,
> .hub_control = vhci_hub_control,
If the goal is to avoid wasting CPU cycles, you probably should have a
vhci_unmap_urb_for_dma routine as well.
Alan Stern
