On 17/06/19 12:57, Oliver Neukum wrote:
Am Montag, den 17.06.2019, 12:35 +0200 schrieb Bernd Steinhauser:
The device advertises as MCS, Granite Devices SimuCUBE with id 16d0:0d5a, I'll attach lsusb output.
Upon connection, the device is recognized and the output is:
[ 3271.812807] usb 1-2.4.2: new full-speed USB device number 10 using xhci_hcd
[ 3271.921182] usb 1-2.4.2: New USB device found, idVendor=16d0, idProduct=0d5a, bcdDevice= 2.00
[ 3271.921184] usb 1-2.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3271.921185] usb 1-2.4.2: Product: SimuCUBE
[ 3271.921186] usb 1-2.4.2: Manufacturer: Granite Devices
[ 3271.921187] usb 1-2.4.2: SerialNumber: 0123456789
[ 3281.943990] input: Granite Devices SimuCUBE as /devices/pci0000:00/0000:00:09.0/0000:04:00.0/usb1/1-2/1-2.4/1-2.4.2/1-2.4.2:1.0/0003:16D0:0D5A.0016/input/input48
[ 3281.944223] hid-generic 0003:16D0:0D5A.0016: unknown set_effect report layout
[ 3281.944228] hid-generic 0003:16D0:0D5A.0016: input,hiddev2,hidraw15: USB HID v1.11 Joystick [Granite Devices SimuCUBE] on usb-0000:04:00.0-2.4.2/input0
I spent some time looking at the code and also other ffb code in usbhid, but since I'm not really familiar with C I have a hard time figuring out why it doesn't work out of the box and how to fix this, but I'd be happy to help implementing/debugging it.
For a start, it would be really nice to find out what is reported, what the report should look like and why it doesn't match.
Hi,
1. this eport is more appropriate for linux-input. You should put it
into CC
Greg told me to write to this list, but I'll CC them.
3. Your lsusb is incomplete (likely you need to run it as root), so
nobody can say what's wrong with your descriptors.
I ran the command (lsusb -v -s 003:010) again as root, but the output remains
the same, especially the messages
can't get device qualifier: Resource temporarily unavailable
can't get debug descriptor: Resource temporarily unavailable
remain.
Kind Regards,
Bernd
