Add imx7ulp USBOTG1 support.
Signed-off-by: Peter Chen <peter.chen@xxxxxxx>
---
arch/arm/boot/dts/imx7ulp.dtsi | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
index fca6e50f37c8..5115e47715c3 100644
--- a/arch/arm/boot/dts/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/imx7ulp.dtsi
@@ -30,6 +30,7 @@
serial1 = &lpuart5;
serial2 = &lpuart6;
serial3 = &lpuart7;
+ usbphy0 = &usbphy1;
};
cpus {
@@ -133,6 +134,33 @@
clock-names = "ipg", "per";
};
+ usbotg1: usb@40330000 {
+ compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb";
+ reg = <0x40330000 0x200>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc2 IMX7ULP_CLK_USB0>;
+ phys = <&usbphy1>;
+ fsl,usbmisc = <&usbmisc1 0>;
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x8>;
+ rx-burst-size-dword = <0x8>;
+ status = "disabled";
+ };
+
+ usbmisc1: usbmisc@40330200 {
+ compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc";
+ #index-cells = <1>;
+ reg = <0x40330200 0x200>;
+ };
+
+ usbphy1: usbphy@0x40350000 {
+ compatible = "fsl,imx7ulp-usbphy", "fsl,imx6ul-usbphy";
+ reg = <0x40350000 0x1000>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>;
+ #phy-cells = <0>;
+ };
+
usdhc0: mmc@40370000 {
compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc";
reg = <0x40370000 0x10000>;
--
2.14.1
