Re: [PATCH v7 3/5] usb: host: ohci-sm501: init genalloc for local memory

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jun 05, 2019 at 02:46:22PM -0700, Guenter Roeck wrote:
> On Wed, May 29, 2019 at 01:28:41PM +0300, laurentiu.tudor@xxxxxxx wrote:
> > From: Laurentiu Tudor <laurentiu.tudor@xxxxxxx>
> > 
> > In preparation for dropping the existing "coherent" dma mem declaration
> > APIs, replace the current dma_declare_coherent_memory() based mechanism
> > with the creation of a genalloc pool that will be used in the OHCI
> > subsystem as replacement for the DMA APIs.
> > 
> > For context, see thread here: https://lkml.org/lkml/2019/4/22/357
> > 
> > Signed-off-by: Laurentiu Tudor <laurentiu.tudor@xxxxxxx>
> 
> This patch results in usb access failures when trying to boot from the
> sm501-usb controller on sh4 with qemu.
> 
> usb 1-2.1: reset full-speed USB device number 4 using sm501-usb
> sd 1:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=0x00
> sd 1:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 00 00 08 7c 00 00 f0 00
> print_req_error: I/O error, dev sda, sector 2172 flags 80700
> usb 1-2.1: reset full-speed USB device number 4 using sm501-usb
> sd 1:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=0x00
> sd 1:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 00 00 01 da 00 00 f0 00
> print_req_error: I/O error, dev sda, sector 474 flags 84700
> usb 1-2.1: reset full-speed USB device number 4 using sm501-usb
> sd 1:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=0x00
> sd 1:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 00 00 02 da 00 00 f0 00
> print_req_error: I/O error, dev sda, sector 730 flags 84700
> usb 1-2.1: reset full-speed USB device number 4 using sm501-usb
> sd 1:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=0x00
> sd 1:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 00 00 0b 50 00 00 f0 00
> print_req_error: I/O error, dev sda, sector 2896 flags 84700
> 
> Qemu command line is:
> 
> The qemu command line is:
> 
> qemu-system-sh4 -M r2d \
>         -kernel ./arch/sh/boot/zImage \
> 	-snapshot \
> 	-usb -device usb-storage,drive=d0 \
> 	-drive file=rootfs.ext2,if=none,id=d0,format=raw \
> 	-append 'panic=-1 slub_debug=FZPUA root=/dev/sda rootwait console=ttySC1,115200 earlycon=scif,mmio16,0xffe80000 noiotrap' \
> 	-serial null -serial stdio \
> 	-net nic,model=rtl8139 -net user -nographic -monitor null
> 
> Reverting this patch as well as "USB: drop HCD_LOCAL_MEM flag" fixes the
> problem. Reverting "USB: drop HCD_LOCAL_MEM flag" alone does not help.
> 

This problem is still seen in next-20190611.
Has anyone actually tested this code ?

Guenter



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux