This series patches will add Fintek F81532A/534A/535/536 support and refactoring some source code. The Fintek F81532A/534A/535/536 is USB-to-2/4/8/12 serial ports device. It cotains a HUB, a GPIO device and 2/4/8/12 serial ports. The F81534A series will default enable only HUB & GPIO device when plugged and disable UARTs as default. We need control GPIO device to enable serial port with special sequence. The most serial port features of F81534A series is same with F81232. That's the difference with following: 1. More RX FIFO and cache. (128byte FIFO + max to 128bytes*4 cache) 2. up to 3MBits baudrate. 3. 3x GPIOs per port to control transceiver. 4. UART devices need enabled by GPIO device register. Ji-Ze Hong (Peter Hong) (6): USB: serial: f81232: Add F81534A support USB: serial: f81232: Force F81534A with RS232 mode USB: serial: f81232: Add generator for F81534A USB: serial: f81232: Add tx_empty function USB: serial: f81232: Use devm_kzalloc USB: serial: f81232: Add gpiolib to GPIO device drivers/usb/serial/f81232.c | 760 ++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 741 insertions(+), 19 deletions(-) -- 2.7.4
