Hi Minas,
This is a reminder in case you missed this patch.
Kind regards,
Jules
On Thu, May 09, 2019 at 11:15:28AM +0200, Jules Maselbas wrote:
> Setting params.phy_utmi_width in dwc2_lowlevel_hw_init() is pointless since
> it's value will be overwritten by dwc2_init_params().
>
> This change make sure to take in account the generic PHY width information
> during paraminitialisation, done in dwc2_set_param_phy_utmi_width().
>
> By doing so, the phy_utmi_width params can still be overrided by
> devicetree specific params and will also be checked against hardware
> capabilities.
>
> Fixes: 707d80f0a3c5 ("usb: dwc2: gadget: Replace phyif with phy_utmi_width")
> Tested-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
> Signed-off-by: Jules Maselbas <jmaselbas@xxxxxxxxx>
> ---
> v2: Fix typo in commit message. Add Fixes and Tested-by tags.
> ---
> drivers/usb/dwc2/params.c | 9 +++++++++
> drivers/usb/dwc2/platform.c | 9 ---------
> 2 files changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
> index 6900eea57526..5949262ff669 100644
> --- a/drivers/usb/dwc2/params.c
> +++ b/drivers/usb/dwc2/params.c
> @@ -253,6 +253,15 @@ static void dwc2_set_param_phy_utmi_width(struct dwc2_hsotg *hsotg)
> val = (hsotg->hw_params.utmi_phy_data_width ==
> GHWCFG4_UTMI_PHY_DATA_WIDTH_8) ? 8 : 16;
>
> + if (hsotg->phy) {
> + /*
> + * If using the generic PHY framework, check if the PHY bus
> + * width is 8-bit and set the phyif appropriately.
> + */
> + if (phy_get_bus_width(hsotg->phy) == 8)
> + val = 8;
> + }
> +
> hsotg->params.phy_utmi_width = val;
> }
>
> diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
> index d10a7f8daec3..e98d7812da2d 100644
> --- a/drivers/usb/dwc2/platform.c
> +++ b/drivers/usb/dwc2/platform.c
> @@ -271,15 +271,6 @@ static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
>
> hsotg->plat = dev_get_platdata(hsotg->dev);
>
> - if (hsotg->phy) {
> - /*
> - * If using the generic PHY framework, check if the PHY bus
> - * width is 8-bit and set the phyif appropriately.
> - */
> - if (phy_get_bus_width(hsotg->phy) == 8)
> - hsotg->params.phy_utmi_width = 8;
> - }
> -
> /* Clock */
> hsotg->clk = devm_clk_get_optional(hsotg->dev, "otg");
> if (IS_ERR(hsotg->clk)) {
> --
> 2.21.0.196.g041f5ea
>
