On 27.05.2019 12:44, Peter Chen wrote:
An endpoint conflict occurs when the USB is working in device mode during an isochronous communication. When the endpointA IN direction is an isochronous IN endpoint, and the host sends an IN token to endpointA on another device, then the OUT transaction may be missed regardless the OUT endpoint number. Generally, this occurs when the device is connected to the host through a hub and other devices are connected to the same hub. The affected OUT endpoint can be either control, bulk, isochronous, or an interrupt endpoint. After the OUT endpoint is primed, if an IN token to the same endpoint number on another device is received, then the OUT endpoint may be unprimed (cannot be detected by software), which causes this endpoint to no longer respond to the host OUT token, and thus, no corresponding interrupt occurs. There is no good workaround for this issue, the only thing the software could do is numbering isochronous IN from the highest endpoint since we have observed most of device number endpoint from the lowest. Cc: <stable@xxxxxxxxxxxxxxx> #v3.14+ Cc: Jun Li <jun.li@xxxxxxx> Signed-off-by: Peter Chen <peter.chen@xxxxxxx> --- drivers/usb/chipidea/udc.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 829e947cabf5..411d387a45c9 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -1622,6 +1622,29 @@ static int ci_udc_pullup(struct usb_gadget *_gadget, int is_on) static int ci_udc_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver); static int ci_udc_stop(struct usb_gadget *gadget); + + +/* Match ISOC IN from the highest endpoint */ +static structUm, please break the line before the function's type is fully described.
Mm, I meant to type "after". :-)
+usb_ep *ci_udc_match_ep(struct usb_gadget *gadget, + struct usb_endpoint_descriptor *desc, + struct usb_ss_ep_comp_descriptor *comp_desc) +{ + struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget); + struct usb_ep *ep; + u8 type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + + if ((type == USB_ENDPOINT_XFER_ISOC) && + (desc->bEndpointAddress & USB_DIR_IN)) {Please add 1 more tab here, so that this line doesn't blend with the following statement.+ list_for_each_entry_reverse(ep, &ci->gadget.ep_list, ep_list) { + if (ep->caps.dir_in && !ep->claimed) + return ep; + } + } + + return NULL; +} + /** * Device operations part of the API to the USB controller hardware, * which don't involve endpoints (or i/o)Will change both comments, thanks.
TIA.
Peter
MBR, Sergei
