Hi,
On Mon, 2019-05-20 at 11:31 +0300, Heikki Krogerus wrote:
> On Tue, May 14, 2019 at 04:47:22PM +0800, Chunfeng Yun wrote:
> > +static int usb_conn_probe(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > + struct device_node *node = dev->of_node;
> > + struct device_node *remote_node;
> > + struct usb_conn_info *info;
> > + int ret = 0;
> > +
> > + info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
> > + if (!info)
> > + return -ENOMEM;
> > +
> > + info->dev = dev;
> > + info->id_gpiod = devm_gpiod_get_optional(dev, "id", GPIOD_IN);
> > + if (IS_ERR(info->id_gpiod))
> > + return PTR_ERR(info->id_gpiod);
> > +
> > + info->vbus_gpiod = devm_gpiod_get_optional(dev, "vbus", GPIOD_IN);
> > + if (IS_ERR(info->vbus_gpiod))
> > + return PTR_ERR(info->vbus_gpiod);
> > +
> > + if (!info->id_gpiod && !info->vbus_gpiod) {
> > + dev_err(dev, "failed to get gpios\n");
> > + return -ENODEV;
> > + }
> > +
> > + if (info->id_gpiod)
> > + ret = gpiod_set_debounce(info->id_gpiod, USB_GPIO_DEB_US);
> > + if (!ret && info->vbus_gpiod)
> > + ret = gpiod_set_debounce(info->vbus_gpiod, USB_GPIO_DEB_US);
> > + if (ret < 0)
> > + info->debounce_jiffies = msecs_to_jiffies(USB_GPIO_DEB_MS);
> > +
> > + INIT_DELAYED_WORK(&info->dw_det, usb_conn_detect_cable);
> > +
> > + info->vbus = devm_regulator_get(dev, "vbus");
> > + if (IS_ERR(info->vbus)) {
> > + dev_err(dev, "failed to get vbus\n");
> > + return PTR_ERR(info->vbus);
> > + }
> > +
> > + remote_node = of_graph_get_remote_node(node, -1, 0);
>
> This is really not ideal. In practice this code will only work if
> there is only one endpoint described for this device, or if the first
> endpoint is always the one we are looking for. There is no way to
> guarantee that.
Yes, it is.
I'll modify it as case 2, see reply [v5, 4/6] in this series.
>
> The code really has to walk through the entire graph, and identify the
> remote endpoint it's looking for (and for that we have the boolean
> device property).
>
> > + if (!remote_node) {
> > + dev_err(dev, "failed to get remote node\n");
> > + return -ENODEV;
> > + }
> > +
> > + info->role_sw =
> > + fwnode_usb_role_switch_get(of_fwnode_handle(remote_node));
>
> So fwnode_usb_role_switch_get() needs be the one that walks through
> the graph, not the drivers. Otherwise every driver will do the same
> exact steps (boilerplate). Here you need to be able to just pass the
> node of this device, not the remote endpoint:
>
> info->role_sw = fwnode_usb_role_switch_get(dev_fwnode(&client->dev));
>
> But why do you need that function at all? Why wouldn't
> usb_role_switch_get() work?
>
> info->role_sw = usb_role_switch_get(&client->dev);
>
see reply [v5, 4/6] in this series
Thanks a lot.
> > + of_node_put(remote_node);
> > + if (IS_ERR(info->role_sw)) {
> > + dev_err(dev, "failed to get role switch\n");
> > + return PTR_ERR(info->role_sw);
> > + }
> > +
> > + if (info->id_gpiod) {
> > + info->id_irq = gpiod_to_irq(info->id_gpiod);
> > + if (info->id_irq < 0) {
> > + dev_err(dev, "failed to get ID IRQ\n");
> > + ret = info->id_irq;
> > + goto put_role_sw;
> > + }
> > +
> > + ret = devm_request_threaded_irq(dev, info->id_irq, NULL,
> > + usb_conn_isr, USB_CONN_IRQF,
> > + pdev->name, info);
> > + if (ret < 0) {
> > + dev_err(dev, "failed to request ID IRQ\n");
> > + goto put_role_sw;
> > + }
> > + }
> > +
> > + if (info->vbus_gpiod) {
> > + info->vbus_irq = gpiod_to_irq(info->vbus_gpiod);
> > + if (info->vbus_irq < 0) {
> > + dev_err(dev, "failed to get VBUS IRQ\n");
> > + ret = info->vbus_irq;
> > + goto put_role_sw;
> > + }
> > +
> > + ret = devm_request_threaded_irq(dev, info->vbus_irq, NULL,
> > + usb_conn_isr, USB_CONN_IRQF,
> > + pdev->name, info);
> > + if (ret < 0) {
> > + dev_err(dev, "failed to request VBUS IRQ\n");
> > + goto put_role_sw;
> > + }
> > + }
> > +
> > + platform_set_drvdata(pdev, info);
> > +
> > + /* Perform initial detection */
> > + usb_conn_queue_dwork(info, 0);
> > +
> > + return 0;
> > +
> > +put_role_sw:
> > + usb_role_switch_put(info->role_sw);
> > + return ret;
> > +}
>
> thanks,
>
