Hello! On 05/15/2019 03:09 PM, Biju Das wrote: > Add device tree binding document for TI HD3SS3220 Type-C DRP port > controller driver. > > Signed-off-by: Biju Das <biju.das@xxxxxxxxxxxxxx> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > --- > V5-->V6 > * No change. > V4-->V5 > * No Change. > V3-->V4 > * No Change. > V2-->V3 > * Added Rob's Reviewed by tag. > V1-->V2 > * Added connector node. > * updated the example with connector node. > --- > .../devicetree/bindings/usb/ti,hd3ss3220.txt | 37 ++++++++++++++++++++++ > 1 file changed, 37 insertions(+) > create mode 100644 Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt > > diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt > new file mode 100644 > index 0000000..7f41400 > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt > @@ -0,0 +1,37 @@ > +TI HD3SS3220 TypeC DRP Port Controller. > + > +Required properties: > + - compatible: Must be "ti,hd3ss3220". > + - reg: I2C slave address, must be 0x47 or 0x67 based on ADDR pin. > + - interrupts: <a b> where a is the interrupt number and b represents an > + encoding of the sense and level information for the interrupt. This depends on an interrupt controller used. I'd just said "an interrupt specifier", w/o further details. > + > +Required sub-node: > + - connector : The "usb-c-connector" attached to the hd3ss3220 chip. The > + bindings of the connector node are specified in: > + > + Documentation/devicetree/bindings/connector/usb-connector.txt > + [...] MBR, Sergei
