This change fixes a data corruption issue occurred on USB hard disk for
the case that bounce buffer is used during transferring data.
While updating data between sg list and bounce buffer, current
implementation passes mapped sg number (urb->num_mapped_sgs) to
sg_pcopy_from_buffer() and sg_pcopy_to_buffer(). This causes data
not get copied if target buffer is located in the elements after
mapped sg elements. This change passes sg number for full list to
fix issue.
Besides, for copying data from bounce buffer, calling dma_unmap_single()
on the bounce buffer before copying data to sg list can avoid cache issue.
Signed-off-by: Henry Lin <henryl@xxxxxxxxxx>
---
drivers/usb/host/xhci-ring.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 9215a28..f5d0908 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -656,6 +656,7 @@ static void xhci_unmap_td_bounce_buffer(struct xhci_hcd *xhci,
struct device *dev = xhci_to_hcd(xhci)->self.controller;
struct xhci_segment *seg = td->bounce_seg;
struct urb *urb = td->urb;
+ size_t len;
if (!ring || !seg || !urb)
return;
@@ -666,11 +667,14 @@ static void xhci_unmap_td_bounce_buffer(struct xhci_hcd *xhci,
return;
}
- /* for in tranfers we need to copy the data from bounce to sg */
- sg_pcopy_from_buffer(urb->sg, urb->num_mapped_sgs, seg->bounce_buf,
- seg->bounce_len, seg->bounce_offs);
dma_unmap_single(dev, seg->bounce_dma, ring->bounce_buf_len,
DMA_FROM_DEVICE);
+ /* for in tranfers we need to copy the data from bounce to sg */
+ len = sg_pcopy_from_buffer(urb->sg, urb->num_sgs, seg->bounce_buf,
+ seg->bounce_len, seg->bounce_offs);
+ if (len != seg->bounce_len)
+ xhci_warn(xhci, "WARN Wrong bounce buffer read length: %ld != %d\n",
+ len, seg->bounce_len);
seg->bounce_len = 0;
seg->bounce_offs = 0;
}
@@ -3123,6 +3127,7 @@ static int xhci_align_td(struct xhci_hcd *xhci, struct urb *urb, u32 enqd_len,
unsigned int unalign;
unsigned int max_pkt;
u32 new_buff_len;
+ size_t len;
max_pkt = usb_endpoint_maxp(&urb->ep->desc);
unalign = (enqd_len + *trb_buff_len) % max_pkt;
@@ -3153,8 +3158,12 @@ static int xhci_align_td(struct xhci_hcd *xhci, struct urb *urb, u32 enqd_len,
/* create a max max_pkt sized bounce buffer pointed to by last trb */
if (usb_urb_dir_out(urb)) {
- sg_pcopy_to_buffer(urb->sg, urb->num_mapped_sgs,
+ len = sg_pcopy_to_buffer(urb->sg, urb->num_sgs,
seg->bounce_buf, new_buff_len, enqd_len);
+ if (len != seg->bounce_len)
+ xhci_warn(xhci,
+ "WARN Wrong bounce buffer write length: %ld != %d\n",
+ len, seg->bounce_len);
seg->bounce_dma = dma_map_single(dev, seg->bounce_buf,
max_pkt, DMA_TO_DEVICE);
} else {
--
2.7.4
