On Fri, Apr 19, 2019 at 8:36 PM Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> wrote: > > On Wed, 17 Apr 2019, Andrey Konovalov wrote: > > > On Tue, Apr 16, 2019 at 8:25 PM Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> wrote: > > > > > > On Tue, 16 Apr 2019, syzbot wrote: > > > > > > > Hello, > > > > > > > > syzbot has tested the proposed patch but the reproducer still triggered > > > > crash: > > > > INFO: task hung in usb_kill_urb > > > > > > Okay, I think I found the problem. dummy-hcd doesn't check for > > > unsupported speeds until it is too late. Andrey, what values does your > > > usb-fuzzer gadget driver set for its max_speed field? > > > > It's passed from userspace without any validation :( I'll fix this! > > Thanks for looking into it! > > > > I wonder why other people saw this hang as well, they didn't use the > > dummy hcd module for sure. I guess there are might be other reasons. > > Unquestionably it would be for other reasons. usb_kill_urb() is a > host-side routine, not used by gadget drivers. If it fails, the reason > lies in host controller driver. And if people aren't using dummy-hcd > then they must be using a different host controller driver. > > Is there any chance you could get hold of a USB device controller for > more fuzzing tests? With it, you could test other parts of the USB > stack: the UDC driver for whatever hardware you get, and the host > controller driver for whatever you plug the UDC into. > > I don't know what types of UDC are readily available for the type of > computer syzkaller uses. Perhaps Felipe or other people on the mailing > list will have some suggestions. You mean using a hardware UDC and plugging it into a USB host via a physical USB cable? Yeah, I've tried that. I've used the UDC that's available on Raspberry Pi Zero which uses the dwc2 driver for running the reproducers syzkaller generates while having it connected to a Linux host. It works! =) I also have a USB3380 based UDC that uses the net2280 gadget driver. It kind of works, I was able to emulate a SuperSpeed device with it, but the driver crashes all the time. I haven't tried actual fuzzing of a physical host yet, that is something on my TODO list. I was more interested in fuzzing non-Linux hosts this way, but I can try it with Linux as well. The problem here is that it's difficult to automate this.
