On Tue, Apr 09, 2019 at 04:02:30PM +0300, Heikki Krogerus wrote:
> +Hans
>
> On Mon, Apr 08, 2019 at 10:17:35PM +0800, Kyle Tso wrote:
> > On Fri, Apr 5, 2019 at 9:42 PM Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
> > >
> > > On 4/4/19 7:13 AM, Heikki Krogerus wrote:
> > > > Hi,
> > > >
> > > > On Fri, Mar 22, 2019 at 08:17:45PM +0800, Kyle Tso wrote:
> > > >> This patch provides the implementation of Collision Avoidance introduced
> > > >> in PD3.0. The start of each Atomic Message Sequence (AMS) initiated by
> > > >> the port will be denied if the current AMS is not interruptible. The
> > > >> Source port will set the CC to SinkTxNG if it is going to initiate an
> > > >> AMS, and SinkTxOk otherwise. Meanwhile, any AMS initiated by a Sink port
> > > >> will be denied in TCPM if the port partner (Source) sets SinkTxNG except
> > > >> for HARD_RESET and SOFT_RESET.
> > > >
> > > > I tested this with my GDBWin which has fusb302. When I plug-in
> > > > DisplayPort adapter, the partner device never gets registered, and I
> > > > see steady flow of warnings from fusb302:
> > > >
> > >
> > > FWIW, I made multiple attempts to review the patch. Each time I get stuck
> > > after a while and notice that I don't understand what is going on.
> > >
> > > Maybe the state machine needs a complete overhaul. It seems to have reached
> > > a point where it is getting too complex to understand what is going on.
> > >
> > > > [ 693.391176] Vconn is on during toggle start
> > > > [ 693.391250] WARNING: CPU: 2 PID: 30 at drivers/usb/typec/tcpm/fusb302.c:562 fusb302_set_toggling+0x129/0x130 [fusb302]
> > > > [ 693.400293] Modules linked in: intel_xhci_usb_role_switch fusb302 tcpm roles pi3usb30532 i915 typec intel_gtt intel_cht_int33fe
> > > > [ 693.406309] CPU: 2 PID: 30 Comm: kworker/u8:1 Tainted: G W 5.1.0-rc3-heikki+ #17
> > > > [ 693.408434] cht_wcove_pwrsrc cht_wcove_pwrsrc: Could not detect charger type
> > > > [ 693.412278] Hardware name: Default string Default string/Default string, BIOS 5.11 05/25/2017
> > > > [ 693.412283] Workqueue: i2c-fusb302 tcpm_state_machine_work [tcpm]
> > > > [ 693.424256] RIP: 0010:fusb302_set_toggling+0x129/0x130 [fusb302]
> > > > [ 693.427234] Code: 89 df e8 da ef ff ff 85 c0 78 c6 c6 83 b0 01 00 00 00 eb b7 b9 02 00 00 00 e9 48 ff ff ff 48 c7 c7 20 e8 21 a0 e8 8e 0c e4 e0 <0f> 0b e9 58 ff ff ff 41 55 4c 8d 6f e8 41 54 41 89 f4 55 53 48 8d
> > > > [ 693.436204] RSP: 0000:ffffc9000076bd90 EFLAGS: 00010286
> > > > [ 693.439174] RAX: 0000000000000000 RBX: ffff888178080028 RCX: 0000000000000000
> > > > [ 693.442157] RDX: 000000000000001f RSI: ffffffff8259051f RDI: ffffffff8259091f
> > > > [ 693.445130] RBP: 0000000000000003 R08: ffffffff82590500 R09: 00000000000202c0
> > > > [ 693.448100] R10: 0000010cb24a3d18 R11: 000000000000001e R12: ffff8881780801b0
> > > > [ 693.451086] R13: ffffffffa021e4e5 R14: 0000000000000003 R15: ffff888178080040
> > > > [ 693.454060] FS: 0000000000000000(0000) GS:ffff88817bb00000(0000) knlGS:0000000000000000
> > > > [ 693.460009] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> > > > [ 693.462984] CR2: 00000000f7fb74a0 CR3: 000000000200d000 CR4: 00000000001006e0
> > > > [ 693.465969] Call Trace:
> > > > [ 693.468937] tcpm_set_cc+0xb9/0x170 [fusb302]
> > > > [ 693.471894] tcpm_ams_start+0x1b8/0x2a0 [tcpm]
> > >
> > > tcpm_ams_start() sets TYPEC_CC_RP_1_5 unconditionally, no matter what. This causes
> > > the fusb302 code to start toggling. As such, it may well attempt to start toggling
> > > in the wrong state.
> > >
> > > Guenter
> > >
> >
> > I read the fusb302 spec but failed to find the statement that says it
> > should "set toggling" when CC switches among default/medium/high.
> >
> > quot from fusb302 spec:
> > "The FUSB302 allows the host software to change the charging current
> > capabilities of the port through the HOST_CUR control bits. If the
> > HOST_CUR bits are changed prior to attach, the FUSB302 automatically
> > indicates the programmed current capability when a device is attached.
> > If the current capabilities are changed after a device is attached,
> > the FUSB302 immediately changes the CC line to the programmed
> > capability."
> >
> > Is it possible to skip fusb302_set_toggling() @ line#658 if
> > tcpm_set_cc() is called in order to switch the cc among
> > default/medium/high of Rp ?
Hans, you introduced that in commit daf81d0137a9c ("usb: typec:
fusb302: Refactor / simplify tcpm_set_cc()"), so could you take a look
at this.
> > the tcpm log on another PD controller:
> > [ 1215.709538] CC1: 0 -> 2, CC2: 0 -> 1 [state DRP_TOGGLING, polarity
> > 0, connected]
> > [ 1215.709551] state change DRP_TOGGLING -> SRC_ATTACH_WAIT
> > [ 1215.709576] pending state change SRC_ATTACH_WAIT -> SRC_ATTACHED @
> > 200 ms
> > [ 1215.907465] state change SRC_ATTACH_WAIT -> SRC_ATTACHED [delayed
> > 200 ms]
> > [ 1215.907670] polarity 0
> > [ 1215.908070] Requesting mux state 1, usb-role 1, orientation 1
> > [ 1215.909342] vconn:=1
> > [ 1215.909549] vbus:=1 charge=0
> > [ 1215.909633] Setting pd capable false
> > [ 1215.909637] pending state change SRC_ATTACHED -> SRC_UNATTACHED @
> > 480 ms
> > [ 1215.909685] VBUS on
> > [ 1215.909687] state change SRC_ATTACHED -> SRC_STARTUP
> > [ 1215.914263] AMS POWER_NEGOTIATION start
> > [ 1215.914267] cc:=4
> > [ 1215.914288] state change SRC_STARTUP -> AMS_START in AMS POWER_NEGOTIATION
> > [ 1215.914294] state change AMS_START -> SRC_SEND_CAPABILITIES in AMS
> > POWER_NEGOTIATION
> > [ 1215.914298] PD TX, header: 0x11a1
> > [ 1215.919552] PD TX complete, status: 2
> > [ 1215.919577] pending state change SRC_SEND_CAPABILITIES ->
> > SRC_SEND_CAPABILITIES @ 150 ms in AMS POWER_NEGOTIATION
> > [ 1216.071041] state change SRC_SEND_CAPABILITIES ->
> > SRC_SEND_CAPABILITIES [delayed 150 ms]
> > [ 1216.071049] PD TX, header: 0x11a1
> > [ 1216.072508] PD TX complete, status: 0
> > [ 1216.072535] Setting pd capable true
> > [ 1216.072645] pending state change SRC_SEND_CAPABILITIES ->
> > HARD_RESET_SEND @ 150 ms in AMS POWER_NEGOTIATION
> > [ 1216.073915] PD RX, header: 0x1042 [1]
> > [ 1216.073920] state change SRC_SEND_CAPABILITIES -> SRC_NEGOTIATE_CAPABILITIES
> > [ 1216.073941] Requested 5000 mV, 900 mA for 900 / 900 mA
> > [ 1216.073944] PD TX, header: 0x363
> > [ 1216.075281] PD TX complete, status: 0
> > [ 1216.075337] pending state change SRC_NEGOTIATE_CAPABILITIES ->
> > SRC_TRANSITION_SUPPLY @ 35 ms
> > [ 1216.113742] state change SRC_NEGOTIATE_CAPABILITIES ->
> > SRC_TRANSITION_SUPPLY [delayed 35 ms]
> > [ 1216.113752] PD TX, header: 0x566
> > [ 1216.116743] PD TX complete, status: 0
> > [ 1216.117175] state change SRC_TRANSITION_SUPPLY -> SRC_READY
> > [ 1216.118737] PD TX, header: 0x176f
> > [ 1216.120285] PD TX complete, status: 0
> > [ 1216.122455] PD RX, header: 0x524f [1]
> > [ 1216.122463] Rx VDM cmd 0xff008041 type 1 cmd 1 len 5
> > [ 1216.122511] Identity: 04b4:1120.0000
> > [ 1216.122531] PD TX, header: 0x196f
> > [ 1216.123965] PD TX complete, status: 0
> > [ 1216.125573] PD RX, header: 0x244f [1]
> > [ 1216.125578] Rx VDM cmd 0xff008042 type 1 cmd 2 len 2
> > [ 1216.125581] SVID 1: 0xff01
> > [ 1216.125603] PD TX, header: 0x1b6f
> > [ 1216.127074] PD TX complete, status: 0
> > [ 1216.128750] PD RX, header: 0x264f [1]
> > [ 1216.128754] Rx VDM cmd 0xff018043 type 1 cmd 3 len 2
> > [ 1216.128758] Alternate mode 0: SVID 0xff01, VDO 1: 0x00000405
> >
> > > > [ 693.474855] ? _cond_resched+0x10/0x20
> > > > [ 693.477807] tcpm_state_machine_work+0x57e/0x28f6 [tcpm]
> > > > [ 693.480776] ? tcpm_pd_event_handler+0x111/0x320 [tcpm]
> > > > [ 693.483743] process_one_work+0x1da/0x410
> > > > [ 693.486703] worker_thread+0x28/0x3c0
> > > > [ 693.489651] ? process_one_work+0x410/0x410
> > > > [ 693.492603] kthread+0x10b/0x130
> > > > [ 693.495548] ? kthread_create_on_node+0x60/0x60
> > > > [ 693.498506] ret_from_fork+0x1f/0x30
> > > >
> > > >
> > > > Here's the tcpm debugfs log:
> > > >
> > > > [ 692.553000] CC1: 0 -> 2, CC2: 0 -> 1 [state DRP_TOGGLING, polarity 0, connected]
> > > > [ 692.553016] state change DRP_TOGGLING -> SRC_ATTACH_WAIT
> > > > [ 692.553056] pending state change SRC_ATTACH_WAIT -> SNK_TRY @ 200 ms
> > > > [ 692.757402] state change SRC_ATTACH_WAIT -> SNK_TRY [delayed 200 ms]
> > > > [ 692.757410] cc:=2
> > > > [ 692.761946] pending state change SNK_TRY -> SNK_TRY_WAIT @ 100 ms
> > > > [ 692.869308] state change SNK_TRY -> SNK_TRY_WAIT [delayed 100 ms]
> > > > [ 692.869313] state change SNK_TRY_WAIT -> SRC_TRYWAIT
> > > > [ 692.869317] cc:=3
> > > > [ 692.873657] pending state change SRC_TRYWAIT -> SRC_TRYWAIT_UNATTACHED @ 100 ms
> > > > [ 692.882524] CC1: 2 -> 2, CC2: 1 -> 1 [state SRC_TRYWAIT, polarity 0, connected]
> > > > [ 692.882537] state change SRC_TRYWAIT -> SRC_TRYWAIT_DEBOUNCE
> > > > [ 692.882567] pending state change SRC_TRYWAIT_DEBOUNCE -> SRC_ATTACHED @ 200 ms
> > > > [ 693.085337] state change SRC_TRYWAIT_DEBOUNCE -> SRC_ATTACHED [delayed 200 ms]
> > > > [ 693.085347] polarity 0
> > > > [ 693.085352] Requesting mux state 1, usb-role 1, orientation 1
> > > > [ 693.346845] vconn:=1
> > > > [ 693.347174] vbus:=1 charge=0
> > > > [ 693.358340] pending state change SRC_ATTACHED -> SRC_UNATTACHED @ 480 ms
> > > > [ 693.378702] VBUS on
> > > > [ 693.378711] state change SRC_ATTACHED -> SRC_STARTUP
> > > > [ 693.378741] AMS POWER_NEGOTIATION start
> > > > [ 693.378745] cc:=4
> > > > [ 693.505321] state change SRC_STARTUP -> AMS_START in AMS POWER_NEGOTIATION
> > > > [ 693.505325] state change AMS_START -> SRC_SEND_CAPABILITIES in AMS POWER_NEGOTIATION
> > > > [ 693.505327] PD TX, header: 0x11a1
> > > > [ 693.613296] pending state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES @ 150 ms in AMS POWER_NEGOTIATION
> > > > [ 693.613309] CC1: 2 -> 2, CC2: 1 -> 1 [state SRC_SEND_CAPABILITIES, polarity 0, connected]
> > > > [ 693.765730] state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES [delayed 150 ms]
> > > > [ 693.765753] PD TX, header: 0x11a1
> > > > [ 693.770016] PD TX complete, status: 0
> > > > [ 693.770261] pending state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES_TIMEOUT @ 150 ms in AMS POWER_NEGOTIATION
> > > > [ 693.775178] PD RX, header: 0x1042 [1]
> > > > [ 693.775195] state change SRC_SEND_CAPABILITIES -> SRC_NEGOTIATE_CAPABILITIES
> > > > [ 693.775236] Requested 5000 mV, 400 mA for 400 / 900 mA
> > > > [ 693.775244] PD TX, header: 0x363
> > > > [ 693.778253] PD TX complete, status: 0
> > > > [ 693.778363] pending state change SRC_NEGOTIATE_CAPABILITIES -> SRC_TRANSITION_SUPPLY @ 35 ms
> > > > [ 693.803463] Received hard reset
> > > > [ 693.803473] state change SRC_NEGOTIATE_CAPABILITIES -> HARD_RESET_START
> > > > [ 693.806323] pending state change HARD_RESET_START -> SRC_HARD_RESET_VBUS_OFF @ 30 ms
> > > > [ 693.837400] state change HARD_RESET_START -> SRC_HARD_RESET_VBUS_OFF [delayed 30 ms]
> > > > [ 693.837414] vconn:=1
> > > > [ 693.837426] vbus:=0 charge=0
> > > > [ 693.843380] Requesting mux state 1, usb-role 1, orientation 1
> > > > [ 693.844554] pending state change SRC_HARD_RESET_VBUS_OFF -> SRC_HARD_RESET_VBUS_ON @ 760 ms
> > > > [ 693.844575] VBUS off
> > > > [ 693.844580] state change SRC_HARD_RESET_VBUS_OFF -> SRC_HARD_RESET_VBUS_ON
> > > > [ 693.844617] vbus:=1 charge=0
> > > > [ 693.850688] pending state change SRC_HARD_RESET_VBUS_ON -> SRC_UNATTACHED @ 480 ms
> > > > [ 693.868706] VBUS on
> > > > [ 693.868713] state change SRC_HARD_RESET_VBUS_ON -> SRC_STARTUP
> > > > [ 693.868742] AMS POWER_NEGOTIATION start
> > > > [ 693.868749] cc:=4
> > > > [ 694.101422] state change SRC_STARTUP -> AMS_START in AMS POWER_NEGOTIATION
> > > > [ 694.101425] state change AMS_START -> SRC_SEND_CAPABILITIES in AMS POWER_NEGOTIATION
> > > > [ 694.101428] PD TX, header: 0x11a1
> > > > [ 694.205301] pending state change SRC_SEND_CAPABILITIES -> SRC_SEND_CAPABILITIES @ 150 ms in AMS POWER_NEGOTIATION
> > > > [ 694.205317] CC1: 2 -> 2, CC2: 1 -> 1 [state SRC_SEND_CAPABILITIES, polarity 0, connected]
> > > > [ 694.325808] Received hard reset
> > > > [ 694.325816] state change SRC_SEND_CAPABILITIES -> HARD_RESET_START in AMS NONE_AMS
> > > > [ 694.329208] pending state change HARD_RESET_START -> SRC_HARD_RESET_VBUS_OFF @ 30 ms in AMS NONE_AMS
> > > > [ 694.359394] state change HARD_RESET_START -> SRC_HARD_RESET_VBUS_OFF [delayed 30 ms]
> > > > [ 694.359401] vconn:=1
> > > > [ 694.359408] vbus:=0 charge=0
> > > > [ 694.366321] Requesting mux state 1, usb-role 1, orientation 1
> > > > [ 694.367685] pending state change SRC_HARD_RESET_VBUS_OFF -> SRC_HARD_RESET_VBUS_ON @ 760 ms in AMS NONE_AMS
> > > > [ 694.367700] VBUS off
> > > > [ 694.367704] state change SRC_HARD_RESET_VBUS_OFF -> SRC_HARD_RESET_VBUS_ON in AMS NONE_AMS
> > > > [ 694.367721] vbus:=1 charge=0
> > > > [ 694.374175] pending state change SRC_HARD_RESET_VBUS_ON -> SRC_UNATTACHED @ 480 ms in AMS NONE_AMS
> > > > [ 694.374194] CC1: 2 -> 0, CC2: 1 -> 0 [state SRC_HARD_RESET_VBUS_ON, polarity 0, disconnected]
> > > > [ 694.374201] state change SRC_HARD_RESET_VBUS_ON -> SRC_UNATTACHED in AMS NONE_AMS
> > > > [ 694.631957] Start DRP toggling
thanks,
--
heikki
