From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
There's no reason to have a separate variable to keep track of the
regulator state. The regulator core already does that. Remove
reg_enabled from struct da8xx_ohci_hcd.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
---
drivers/usb/host/ohci-da8xx.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
index ca8a94f15ac0..9c6d1f03b871 100644
--- a/drivers/usb/host/ohci-da8xx.c
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -40,7 +40,6 @@ struct da8xx_ohci_hcd {
struct phy *usb11_phy;
struct regulator *vbus_reg;
struct notifier_block nb;
- unsigned int reg_enabled;
struct gpio_desc *vbus_gpio;
struct gpio_desc *oc_gpio;
};
@@ -100,21 +99,18 @@ static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on)
if (!da8xx_ohci->vbus_reg)
return 0;
- if (on && !da8xx_ohci->reg_enabled) {
+ if (on) {
ret = regulator_enable(da8xx_ohci->vbus_reg);
if (ret) {
dev_err(dev, "Failed to enable regulator: %d\n", ret);
return ret;
}
- da8xx_ohci->reg_enabled = 1;
-
- } else if (!on && da8xx_ohci->reg_enabled) {
+ } else if (!on) {
ret = regulator_disable(da8xx_ohci->vbus_reg);
if (ret) {
dev_err(dev, "Failed to disable regulator: %d\n", ret);
return ret;
}
- da8xx_ohci->reg_enabled = 0;
}
return 0;
--
2.21.0
