[PATCH v2 4/6] ARM: davinci: omapl138-hawk: add a fixed regulator for ohci-da8xx

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>

Instead of directly using the vbus GPIO we should model it as a fixed
regulator. Add all necessary fix-ups for the regulator to be registered
and configure the vbus GPIO as its enable pin.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
---
 arch/arm/mach-davinci/board-omapl138-hawk.c | 49 +++++++++++++++++++--
 1 file changed, 46 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index e244c8648594..0039b4d4c935 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -21,6 +21,7 @@
 #include <linux/platform_data/mtd-davinci.h>
 #include <linux/platform_data/mtd-davinci-aemif.h>
 #include <linux/platform_data/ti-aemif.h>
+#include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
@@ -298,15 +299,50 @@ static const short da850_hawk_usb11_pins[] = {
 	-1
 };
 
-static struct gpiod_lookup_table hawk_usb_gpio_lookup = {
+static struct regulator_consumer_supply hawk_usb_supplies[] = {
+	REGULATOR_SUPPLY("vbus", NULL),
+};
+
+static struct regulator_init_data hawk_usb_vbus_data = {
+	.consumer_supplies	= hawk_usb_supplies,
+	.num_consumer_supplies	= ARRAY_SIZE(hawk_usb_supplies),
+};
+
+static struct fixed_voltage_config hawk_usb_vbus = {
+	.supply_name		= "vbus",
+	.microvolts		= 3300000,
+	.init_data		= &hawk_usb_vbus_data,
+};
+
+static struct platform_device hawk_usb_vbus_device = {
+	.name		= "reg-fixed-voltage",
+	.id		= 1,
+	.dev		= {
+		.platform_data = &hawk_usb_vbus,
+	},
+};
+
+static struct gpiod_lookup_table hawk_usb_oc_gpio_lookup = {
 	.dev_id		= "ohci-da8xx",
 	.table = {
-		GPIO_LOOKUP("davinci_gpio", DA850_USB1_VBUS_PIN, "vbus", 0),
 		GPIO_LOOKUP("davinci_gpio", DA850_USB1_OC_PIN, "oc", 0),
 		{ }
 	},
 };
 
+static struct gpiod_lookup_table hawk_usb_vbus_gpio_lookup = {
+	.dev_id		= "reg-fixed-voltage.1",
+	.table = {
+		GPIO_LOOKUP("davinci_gpio", DA850_USB1_VBUS_PIN, NULL, 0),
+		{ }
+	},
+};
+
+static struct gpiod_lookup_table *hawk_usb_gpio_lookups[] = {
+	&hawk_usb_oc_gpio_lookup,
+	&hawk_usb_vbus_gpio_lookup,
+};
+
 static struct da8xx_ohci_root_hub omapl138_hawk_usb11_pdata = {
 	/* TPS2087 switch @ 5V */
 	.potpgt         = (3 + 1) / 2,  /* 3 ms max */
@@ -327,12 +363,19 @@ static __init void omapl138_hawk_usb_init(void)
 		pr_warn("%s: USB PHY CLK registration failed: %d\n",
 			__func__, ret);
 
+	gpiod_add_lookup_tables(hawk_usb_gpio_lookups,
+				ARRAY_SIZE(hawk_usb_gpio_lookups));
+
 	ret = da8xx_register_usb_phy();
 	if (ret)
 		pr_warn("%s: USB PHY registration failed: %d\n",
 			__func__, ret);
 
-	gpiod_add_lookup_table(&hawk_usb_gpio_lookup);
+	ret = platform_device_register(&hawk_usb_vbus_device);
+	if (ret) {
+		pr_warn("%s: Unable to register the vbus supply\n", __func__);
+		return;
+	}
 
 	ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata);
 	if (ret)
-- 
2.21.0




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux