From: Chen-Yu Tsai <wens@xxxxxxxx>
Hi everyone,
As previously reported [1], USB EHCI/OHCI hosts are broken on Allwinner
SoCs on v5.1-rc1. This is partially triggered by commit b97a31348379
("usb: core: comply to PHY framework"), and partially due to how the
Allwinner USB PHY driver handles phy_set_mode for non-OTG PHYs.
This series fixes this in both places.
Patch 1 makes phy-sun4i-usb accept PHY_MODE_USB_HOST for non-OTG PHYs.
Patch 2 makes the usb core fall back to setting the mode
PHY_MODE_USB_HOST if set_mode with PHY_MODE_USB_HOST_SS fails. If that
fails then the failure path is the same as before. This should make it
so existing USB 3.0 drivers are affected.
The patches don't have any dependencies on each other, and could go in
through separate branches. However this affects usability of USB input
devices and Ethernet dongles, I'd rather they go in sooner than later.
Regards
ChenYu
[1] https://lkml.org/lkml/2019/3/18/74
Chen-Yu Tsai (2):
phy: sun4i-usb: Support set_mode to USB_HOST for non-OTG PHYs
usb: core: Try generic PHY_MODE_USB_HOST if usb_phy_roothub_set_mode
fails
drivers/phy/allwinner/phy-sun4i-usb.c | 5 ++++-
drivers/usb/core/hcd.c | 3 +++
2 files changed, 7 insertions(+), 1 deletion(-)
--
2.20.1
