Re: USB bug

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear Alan Stern,

I am extremely sorry for late response, I have just checking all possible kernel versions. I have checked kernel versions 4.11,4.13,4.15,4.19,5.0. I can say that kernel 4.11 works well but 4.13 already have the bug. Yes as you mentioned I already had an HDD attached to the laptop during boot and when I detach it in some kernels like (4.15,5.0) other usb devices starts work when attached after detaching that HDD. I have checked that it doesn't matter if HDD or any device attached to usb port, I get the same behavior. For kernel-4.13, even detaching other devices doesn't help, no usb device recognised. Also I am sending dmesg before and after detaching HDD. About searching changes in linux kernel source code, I have hardly any skills to do that. Thank you in advance.


Regards, Harutyun Khachatryan

On 3/11/19 6:09 PM, Alan Stern wrote:
On Mon, 11 Mar 2019, Harutyun Khachatryan wrote: > >> I have an old Toshiba Sattelite laptop with usb hub device 'Intel
>> Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host >> Controller'. For kernel version >= 4.15 it doesn't recogonize and >> power on any usb device when other usb device already attached >> during system boot. I have seen the same behaviour on Ubuntu 18.04 >> and Fedora 29. > > Does the laptop work with earlier kernel versions? > > Please post a dmesg log showing what happens during boot and when > you plug in a device after boot. > > Alan Stern >
[    0.000000] microcode: microcode updated early to revision 0x20, date = 2018-04-10
[    0.000000] random: get_random_bytes called from start_kernel+0x42/0x507 with crng_init=0
[    0.000000] Linux version 4.13.0-45-generic (buildd@lgw01-amd64-011) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9)) #50~16.04.1-Ubuntu SMP Wed May 30 11:18:27 UTC 2018 (Ubuntu 4.13.0-45.50~16.04.1-generic 4.13.16)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.13.0-45-generic root=UUID=aed0a586-4802-41ed-b85a-dce4c8765b14 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a9a6dfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a9a6e000-0x00000000aa976fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000aa977000-0x00000000aa999fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000aa99a000-0x00000000aa99efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000aa99f000-0x00000000af2befff] usable
[    0.000000] BIOS-e820: [mem 0x00000000af2bf000-0x00000000af6befff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000af6bf000-0x00000000af7befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000af7bf000-0x00000000af7fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000af7ff000-0x00000000af7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000af800000-0x00000000afffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000044effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: TOSHIBA SATELLITE L855/Portable PC, BIOS 6.70 04/15/2013
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x44f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0AF800000 mask FFF800000 uncachable
[    0.000000]   3 base 0B0000000 mask FF0000000 uncachable
[    0.000000]   4 base 0FF800000 mask FFF800000 write-protect
[    0.000000]   5 base 100000000 mask F00000000 write-back
[    0.000000]   6 base 200000000 mask E00000000 write-back
[    0.000000]   7 base 400000000 mask F80000000 write-back
[    0.000000]   8 base 44F000000 mask FFF000000 uncachable
[    0.000000]   9 base 450000000 mask FF0000000 uncachable
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0xaf800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff880e800fe1b0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880e80097000] 97000 size 24576
[    0.000000] BRK [0x3c572c000, 0x3c572cfff] PGTABLE
[    0.000000] BRK [0x3c572d000, 0x3c572dfff] PGTABLE
[    0.000000] BRK [0x3c572e000, 0x3c572efff] PGTABLE
[    0.000000] BRK [0x3c572f000, 0x3c572ffff] PGTABLE
[    0.000000] BRK [0x3c5730000, 0x3c5730fff] PGTABLE
[    0.000000] BRK [0x3c5731000, 0x3c5731fff] PGTABLE
[    0.000000] BRK [0x3c5732000, 0x3c5732fff] PGTABLE
[    0.000000] BRK [0x3c5733000, 0x3c5733fff] PGTABLE
[    0.000000] BRK [0x3c5734000, 0x3c5734fff] PGTABLE
[    0.000000] BRK [0x3c5735000, 0x3c5735fff] PGTABLE
[    0.000000] BRK [0x3c5736000, 0x3c5736fff] PGTABLE
[    0.000000] BRK [0x3c5737000, 0x3c5737fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x31e02000-0x34ef8fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 TOSINV)
[    0.000000] ACPI: XSDT 0x00000000AF7FE210 0000AC (v01 TOSINV TOSINV00 00000001      01000013)
[    0.000000] ACPI: FACP 0x00000000AF7FB000 00010C (v05 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x00000000AF7EF000 008404 (v01 TOSINV TOSINV00 00000000 ACPI 00040000)
[    0.000000] ACPI: FACS 0x00000000AF7BB000 000040
[    0.000000] ACPI: UEFI 0x00000000AF7FD000 000236 (v01 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: ASF! 0x00000000AF7FC000 0000A5 (v32 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0x00000000AF7FA000 000038 (v01 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 0x00000000AF7F9000 00008C (v03 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x00000000AF7F8000 00003C (v01 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: SLIC 0x00000000AF7EE000 000176 (v01 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: WDAT 0x00000000AF7ED000 000224 (v01 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000AF7EB000 001068 (v01 INSYDE CR CRB   00001000 ACPI 00040000)
[    0.000000] ACPI: BOOT 0x00000000AF7E9000 000028 (v01 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: ASPT 0x00000000AF7E7000 000034 (v07 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x00000000AF7E6000 000034 (v01 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000AF7DF000 006C42 (v01 TOSINV TsbOdm   00001000 ACPI 00040000)
[    0.000000] ACPI: FPDT 0x00000000AF7DD000 000044 (v01 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: MSDM 0x00000000AF7DC000 000055 (v03 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000AF7DB000 000918 (v01 INSYDE CR CRB   00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000AF7DA000 000B22 (v01 INSYDE CR CRB   00003000 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000044effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x44efc9000-0x44eff3fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000044effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000a9a6dfff]
[    0.000000]   node   0: [mem 0x00000000aa977000-0x00000000aa999fff]
[    0.000000]   node   0: [mem 0x00000000aa99f000-0x00000000af2befff]
[    0.000000]   node   0: [mem 0x00000000af7ff000-0x00000000af7fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000044effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000044effffff]
[    0.000000] On node 0 totalpages: 4182862
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11087 pages used for memmap
[    0.000000]   DMA32 zone: 709554 pages, LIFO batch:31
[    0.000000]   Normal zone: 54208 pages used for memmap
[    0.000000]   Normal zone: 3469312 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xa9a6e000-0xaa976fff]
[    0.000000] PM: Registered nosave memory: [mem 0xaa99a000-0xaa99efff]
[    0.000000] PM: Registered nosave memory: [mem 0xaf2bf000-0xaf6befff]
[    0.000000] PM: Registered nosave memory: [mem 0xaf6bf000-0xaf7befff]
[    0.000000] PM: Registered nosave memory: [mem 0xaf7bf000-0xaf7fefff]
[    0.000000] PM: Registered nosave memory: [mem 0xaf800000-0xafffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb0000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[    0.000000] e820: [mem 0xb0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 45 pages/cpu @ffff8812cec00000 s146584 r8192 d29544 u262144
[    0.000000] pcpu-alloc: s146584 r8192 d29544 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 4117482
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.13.0-45-generic root=UUID=aed0a586-4802-41ed-b85a-dce4c8765b14 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16325536K/16731448K available (12300K kernel code, 2481K rwdata, 4012K rodata, 2368K init, 2372K bss, 405912K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 37875 entries in 148 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2394.593 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.18 BogoMIPS (lpj=9578372)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170531
[    0.014246] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.014269] Security Framework initialized
[    0.014270] Yama: becoming mindful.
[    0.014289] AppArmor: AppArmor initialized
[    0.016976] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.018285] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.018332] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.018375] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.018572] CPU: Physical Processor ID: 0
[    0.018573] CPU: Processor Core ID: 0
[    0.018579] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.018579] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.018580] FEATURE SPEC_CTRL Present
[    0.018584] mce: CPU supports 9 MCE banks
[    0.018598] process: using mwait in idle threads
[    0.018601] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.018602] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.018603] Spectre V2 mitigation: Mitigation: Full generic retpoline
[    0.018604] Spectre V2 mitigation: Speculation control IBPB supported IBRS supported
[    0.018605] Spectre V2 mitigation: Retpoline compiled kernel.  Defaulting IBRS to disabled
[    0.018606] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.018724] Freeing SMP alternatives memory: 36K
[    0.020063] smpboot: Max logical packages: 2
[    0.020138] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.020587] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.062928] TSC deadline timer enabled
[    0.062932] smpboot: CPU0: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.062996] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.063017] ... version:                3
[    0.063017] ... bit width:              48
[    0.063018] ... generic registers:      4
[    0.063019] ... value mask:             0000ffffffffffff
[    0.063019] ... max period:             00007fffffffffff
[    0.063020] ... fixed-purpose events:   3
[    0.063020] ... event mask:             000000070000000f
[    0.063055] Hierarchical SRCU implementation.
[    0.063932] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.063949] smp: Bringing up secondary CPUs ...
[    0.064000] x86: Booting SMP configuration:
[    0.064000] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.078835] smp: Brought up 1 node, 8 CPUs
[    0.078835] smpboot: Total of 8 processors activated (38313.48 BogoMIPS)
[    0.080463] devtmpfs: initialized
[    0.080463] x86/mm: Memory block size: 128MB
[    0.081244] evm: security.selinux
[    0.081244] evm: security.SMACK64
[    0.081245] evm: security.SMACK64EXEC
[    0.081245] evm: security.SMACK64TRANSMUTE
[    0.081246] evm: security.SMACK64MMAP
[    0.081246] evm: security.ima
[    0.081247] evm: security.capability
[    0.081261] PM: Registering ACPI NVS region [mem 0xa9a6e000-0xaa976fff] (15765504 bytes)
[    0.081261] PM: Registering ACPI NVS region [mem 0xaa99a000-0xaa99efff] (20480 bytes)
[    0.081261] PM: Registering ACPI NVS region [mem 0xaf6bf000-0xaf7befff] (1048576 bytes)
[    0.081261] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.081261] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.081261] pinctrl core: initialized pinctrl subsystem
[    0.081261] RTC time: 22:07:49, date: 03/16/19
[    0.081261] NET: Registered protocol family 16
[    0.081261] cpuidle: using governor ladder
[    0.081261] cpuidle: using governor menu
[    0.081261] PCCT header not found.
[    0.081261] Simple Boot Flag at 0x44 set to 0x1
[    0.081261] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.081261] ACPI: bus type PCI registered
[    0.081261] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.081261] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.081261] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.081261] PCI: Using configuration type 1 for base access
[    0.081261] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.084223] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.084225] ACPI: Added _OSI(Module Device)
[    0.084225] ACPI: Added _OSI(Processor Device)
[    0.084225] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.084225] ACPI: Added _OSI(Processor Aggregator Device)
[    0.084238] ACPI: Executed 1 blocks of module-level executable AML code
[    0.101702] ACPI Error: Needed type [Reference], found [Integer] ffff8812be180d38 (20170531/exresop-103)
[    0.101702] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20170531/dswexec-461)
[    0.101702] ACPI Error: Method parse/execution failed \_PR.CPU0._PDC, AE_AML_OPERAND_TYPE (20170531/psparse-550)
[    0.101702] ACPI: Dynamic OEM Table Load:
[    0.101702] ACPI: SSDT 0xFFFF8812BBD01C00 000303 (v01 PmRef  ApIst    00003000 INTL 20120215)
[    0.101706] ACPI: Dynamic OEM Table Load:
[    0.101706] ACPI: SSDT 0xFFFF8812BC3EFA00 000119 (v01 PmRef  ApCst    00003000 INTL 20120215)
[    0.101706] ACPI: Interpreter enabled
[    0.101706] ACPI: (supports S0 S3 S4 S5)
[    0.101706] ACPI: Using IOAPIC for interrupt routing
[    0.101706] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.101706] ACPI: Enabled 9 GPEs in block 00 to 3F
[    0.104107] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
[    0.109927] ACPI: Power Resource [FN00] (on)
[    0.110529] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.110534] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.110661] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.111124] PCI host bridge to bus 0000:00
[    0.111126] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.111128] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.111129] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.111131] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfeafffff window]
[    0.111133] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.111141] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.111229] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.111265] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.111361] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.111386] pci 0000:00:14.0: reg 0x10: [mem 0xc1200000-0xc120ffff 64bit]
[    0.111458] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.111533] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.111559] pci 0000:00:16.0: reg 0x10: [mem 0xc1214000-0xc121400f 64bit]
[    0.111634] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.111712] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.111734] pci 0000:00:1a.0: reg 0x10: [mem 0xc1219000-0xc12193ff]
[    0.111820] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.111894] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.111917] pci 0000:00:1b.0: reg 0x10: [mem 0xc1210000-0xc1213fff 64bit]
[    0.111991] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.112077] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.112162] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.112241] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.112325] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.112412] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.112435] pci 0000:00:1d.0: reg 0x10: [mem 0xc1218000-0xc12183ff]
[    0.112520] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.112594] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[    0.112770] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.112789] pci 0000:00:1f.2: reg 0x10: [io  0x4048-0x404f]
[    0.112797] pci 0000:00:1f.2: reg 0x14: [io  0x4054-0x4057]
[    0.112805] pci 0000:00:1f.2: reg 0x18: [io  0x4040-0x4047]
[    0.112813] pci 0000:00:1f.2: reg 0x1c: [io  0x4050-0x4053]
[    0.112821] pci 0000:00:1f.2: reg 0x20: [io  0x4020-0x403f]
[    0.112829] pci 0000:00:1f.2: reg 0x24: [mem 0xc1217000-0xc12177ff]
[    0.112871] pci 0000:00:1f.2: PME# supported from D3hot
[    0.112940] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.112959] pci 0000:00:1f.3: reg 0x10: [mem 0xc1215000-0xc12150ff 64bit]
[    0.112980] pci 0000:00:1f.3: reg 0x20: [io  0x4000-0x401f]
[    0.113108] pci 0000:01:00.0: [1002:6840] type 00 class 0x030000
[    0.113126] pci 0000:01:00.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.113136] pci 0000:01:00.0: reg 0x18: [mem 0xc0000000-0xc001ffff 64bit]
[    0.113142] pci 0000:01:00.0: reg 0x20: [io  0x3000-0x30ff]
[    0.113154] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.113190] pci 0000:01:00.0: supports D1 D2
[    0.113249] pci 0000:01:00.1: [1002:aa90] type 00 class 0x040300
[    0.113267] pci 0000:01:00.1: reg 0x10: [mem 0xc0020000-0xc0023fff 64bit]
[    0.113325] pci 0000:01:00.1: supports D1 D2
[    0.124026] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.124031] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.124035] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xc0ffffff]
[    0.124041] pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.124129] pci 0000:07:00.0: [1969:1091] type 00 class 0x020000
[    0.124172] pci 0000:07:00.0: reg 0x10: [mem 0xc1100000-0xc113ffff 64bit]
[    0.124186] pci 0000:07:00.0: reg 0x18: [io  0x2000-0x207f]
[    0.124328] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.136036] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.136044] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.136060] pci 0000:00:1c.0:   bridge window [mem 0xc1100000-0xc11fffff]
[    0.136138] pci 0000:08:00.0: [168c:0032] type 00 class 0x028000
[    0.136181] pci 0000:08:00.0: reg 0x10: [mem 0xc1000000-0xc107ffff 64bit]
[    0.136245] pci 0000:08:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.136332] pci 0000:08:00.0: supports D1 D2
[    0.136334] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.148034] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.148045] pci 0000:00:1c.1:   bridge window [mem 0xc1000000-0xc10fffff]
[    0.148622] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.148674] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.148724] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.148773] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.148822] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.148871] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.148919] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.148968] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.149341] SCSI subsystem initialized
[    0.149355] libata version 3.00 loaded.
[    0.149355] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.149355] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.149355] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.149355] vgaarb: loaded
[    0.149355] ACPI: bus type USB registered
[    0.149355] usbcore: registered new interface driver usbfs
[    0.149355] usbcore: registered new interface driver hub
[    0.149355] usbcore: registered new device driver usb
[    0.149355] EDAC MC: Ver: 3.0.0
[    0.149355] PCI: Using ACPI for IRQ routing
[    0.156116] PCI: pci_cache_line_size set to 64 bytes
[    0.156162] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.156163] e820: reserve RAM buffer [mem 0xa9a6e000-0xabffffff]
[    0.156164] e820: reserve RAM buffer [mem 0xaa99a000-0xabffffff]
[    0.156165] e820: reserve RAM buffer [mem 0xaf2bf000-0xafffffff]
[    0.156166] e820: reserve RAM buffer [mem 0xaf800000-0xafffffff]
[    0.156167] e820: reserve RAM buffer [mem 0x44f000000-0x44fffffff]
[    0.156243] NetLabel: Initializing
[    0.156244] NetLabel:  domain hash size = 128
[    0.156245] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.156260] NetLabel:  unlabeled traffic allowed by default
[    0.156426] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.156431] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.158454] clocksource: Switched to clocksource hpet
[    0.165727] VFS: Disk quotas dquot_6.6.0
[    0.165747] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.165837] AppArmor: AppArmor Filesystem Enabled
[    0.165879] pnp: PnP ACPI init
[    0.166029] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.166031] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.166032] system 00:00: [io  0xffff] has been reserved
[    0.166034] system 00:00: [io  0xffff] has been reserved
[    0.166036] system 00:00: [io  0x0400-0x0453] has been reserved
[    0.166037] system 00:00: [io  0x0458-0x047f] could not be reserved
[    0.166039] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.166040] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.166045] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.166068] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.166107] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.166110] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.166130] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.166150] pnp 00:04: Plug and Play ACPI device, IDs TOS0310 SYN1900 SYN0002 PNP0f13 (active)
[    0.166333] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.166335] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.166337] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.166338] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.166340] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.166342] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.166343] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.166345] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.166347] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.166348] system 00:05: [mem 0xc1300000-0xc1300fff] has been reserved
[    0.166350] system 00:05: [mem 0xff700000-0xff7001ff] has been reserved
[    0.166353] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.166613] system 00:06: [mem 0x20000000-0x201fffff] could not be reserved
[    0.166615] system 00:06: [mem 0x40004000-0x40004fff] could not be reserved
[    0.166618] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.166667] pnp: PnP ACPI: found 7 devices
[    0.172937] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.172942] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    0.172945] pci 0000:08:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    0.172971] pci 0000:01:00.0: BAR 6: assigned [mem 0xc0040000-0xc005ffff pref]
[    0.172973] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.172975] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.172978] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xc0ffffff]
[    0.172980] pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.172984] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.172987] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.172992] pci 0000:00:1c.0:   bridge window [mem 0xc1100000-0xc11fffff]
[    0.173001] pci 0000:08:00.0: BAR 6: assigned [mem 0xc1080000-0xc108ffff pref]
[    0.173003] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.173008] pci 0000:00:1c.1:   bridge window [mem 0xc1000000-0xc10fffff]
[    0.173017] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.173019] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.173020] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.173022] pci_bus 0000:00: resource 7 [mem 0xb0000000-0xfeafffff window]
[    0.173023] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.173025] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc0ffffff]
[    0.173026] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.173028] pci_bus 0000:07: resource 0 [io  0x2000-0x2fff]
[    0.173029] pci_bus 0000:07: resource 1 [mem 0xc1100000-0xc11fffff]
[    0.173031] pci_bus 0000:08: resource 1 [mem 0xc1000000-0xc10fffff]
[    0.173116] NET: Registered protocol family 2
[    0.173277] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.173480] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.173591] TCP: Hash tables configured (established 131072 bind 65536)
[    0.173626] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.173669] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.173735] NET: Registered protocol family 1
[    0.568155] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.568160] pci 0000:07:00.0: set MSI_INTX_DISABLE_BUG flag
[    0.568168] PCI: CLS 64 bytes, default 64
[    0.568214] Unpacking initramfs...
[    1.315148] Freeing initrd memory: 50140K
[    1.315155] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.315159] software IO TLB [mem 0xab2bf000-0xaf2bf000] (64MB) mapped at [ffff880f2b2bf000-ffff880f2f2befff]
[    1.315440] Scanning for low memory corruption every 60 seconds
[    1.315749] audit: initializing netlink subsys (disabled)
[    1.315795] audit: type=2000 audit(1552774070.315:1): state=initialized audit_enabled=0 res=1
[    1.316184] Initialise system trusted keyrings
[    1.316195] Key type blacklist registered
[    1.316233] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    1.317304] zbud: loaded
[    1.317778] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.317902] fuse init (API version 7.26)
[    1.319258] Key type asymmetric registered
[    1.319259] Asymmetric key parser 'x509' registered
[    1.319287] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.319322] io scheduler noop registered
[    1.319323] io scheduler deadline registered
[    1.319347] io scheduler cfq registered (default)
[    1.319933] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    1.319933] vesafb: scrolling: redraw
[    1.319935] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    1.319940] pmd_set_huge: Cannot satisfy [mem 0xb0000000-0xb0200000] with a huge-page mapping due to MTRR override.
[    1.319947] vesafb: framebuffer at 0xb0000000, mapped to 0xffffb05602400000, using 3072k, total 3072k
[    1.320036] Console: switching to colour frame buffer device 128x48
[    1.320052] fb0: VESA VGA frame buffer device
[    1.320064] intel_idle: MWAIT substates: 0x21120
[    1.320065] intel_idle: v0.4.1 model 0x3A
[    1.320348] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.320440] ACPI: AC Adapter [ADP0] (on-line)
[    1.320499] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.320508] ACPI: Power Button [PWRB]
[    1.320798] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    1.321040] ACPI: Lid Switch [LID0]
[    1.321073] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.321091] ACPI: Power Button [PWRF]
[    1.321625] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.321713] thermal LNXTHERM:00: registered as thermal_zone0
[    1.321714] ACPI: Thermal Zone [THRM] (68 C)
[    1.321739] GHES: HEST is not enabled!
[    1.321837] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.322273] ACPI: Battery Slot [BAT0] (battery present)
[    1.323293] Linux agpgart interface v0.103
[    1.325071] loop: module loaded
[    1.325210] libphy: Fixed MDIO Bus: probed
[    1.325211] tun: Universal TUN/TAP device driver, 1.6
[    1.325239] PPP generic driver version 2.4.2
[    1.325279] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.325281] ehci-pci: EHCI PCI platform driver
[    1.325381] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.325387] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.325399] ehci-pci 0000:00:1a.0: debug port 2
[    1.329299] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.329310] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc1219000
[    1.344022] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.344055] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.344057] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.344058] usb usb1: Product: EHCI Host Controller
[    1.344059] usb usb1: Manufacturer: Linux 4.13.0-45-generic ehci_hcd
[    1.344061] usb usb1: SerialNumber: 0000:00:1a.0
[    1.344259] hub 1-0:1.0: USB hub found
[    1.344267] hub 1-0:1.0: 2 ports detected
[    1.344451] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.344455] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.344466] ehci-pci 0000:00:1d.0: debug port 2
[    1.348373] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.348383] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc1218000
[    1.364100] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.364159] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.364161] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.364162] usb usb2: Product: EHCI Host Controller
[    1.364164] usb usb2: Manufacturer: Linux 4.13.0-45-generic ehci_hcd
[    1.364165] usb usb2: SerialNumber: 0000:00:1d.0
[    1.364403] hub 2-0:1.0: USB hub found
[    1.364411] hub 2-0:1.0: 2 ports detected
[    1.364519] ehci-platform: EHCI generic platform driver
[    1.364535] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.364541] ohci-pci: OHCI PCI platform driver
[    1.364551] ohci-platform: OHCI generic platform driver
[    1.364557] uhci_hcd: USB Universal Host Controller Interface driver
[    1.364736] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.364742] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.365828] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[    1.365834] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.365928] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.365930] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.365931] usb usb3: Product: xHCI Host Controller
[    1.365933] usb usb3: Manufacturer: Linux 4.13.0-45-generic xhci-hcd
[    1.365934] usb usb3: SerialNumber: 0000:00:14.0
[    1.366157] hub 3-0:1.0: USB hub found
[    1.366170] hub 3-0:1.0: 4 ports detected
[    1.366491] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.366495] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.366527] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.366529] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.366530] usb usb4: Product: xHCI Host Controller
[    1.366532] usb usb4: Manufacturer: Linux 4.13.0-45-generic xhci-hcd
[    1.366533] usb usb4: SerialNumber: 0000:00:14.0
[    1.366733] hub 4-0:1.0: USB hub found
[    1.366744] hub 4-0:1.0: 4 ports detected
[    1.367092] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    1.369913] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.369917] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.370188] mousedev: PS/2 mouse device common for all mice
[    1.370521] rtc_cmos 00:01: RTC can wake from S4
[    1.370532] rtc_cmos: probe of 00:01 failed with error -16
[    1.370548] i2c /dev entries driver
[    1.370593] device-mapper: uevent: version 1.0.3
[    1.370682] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@xxxxxxxxxx
[    1.370687] intel_pstate: Intel P-state driver initializing
[    1.371174] ledtrig-cpu: registered to indicate activity on CPUs
[    1.371638] NET: Registered protocol family 10
[    1.375817] Segment Routing with IPv6
[    1.375829] NET: Registered protocol family 17
[    1.375836] Key type dns_resolver registered
[    1.376317] RAS: Correctable Errors collector initialized.
[    1.376362] microcode: sig=0x306a9, pf=0x10, revision=0x20
[    1.376500] microcode: Microcode Update Driver: v2.2.
[    1.376623] sched_clock: Marking stable (1376497941, 0)->(1461304716, -84806775)
[    1.376815] registered taskstats version 1
[    1.376825] Loading compiled-in X.509 certificates
[    1.378896] Loaded X.509 cert 'Build time autogenerated kernel key: fec222083a1a40f2051f2b073ec28e5cb659a232'
[    1.378910] zswap: loaded using pool lzo/zbud
[    1.381815] Key type big_key registered
[    1.381817] Key type trusted registered
[    1.383262] Key type encrypted registered
[    1.383263] AppArmor: AppArmor sha1 policy hashing enabled
[    1.383265] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.383278] evm: HMAC attrs: 0x1
[    1.383470]   Magic number: 11:582:148
[    1.383506] acpi device:19: hash matches
[    1.383535] hctosys: unable to open rtc device (rtc0)
[    1.383595] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.383596] EDD information not available.
[    1.383626] PM: Hibernation image not present or could not be loaded.
[    1.385370] Freeing unused kernel memory: 2368K
[    1.386586] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.420068] Write protecting the kernel read-only data: 18432k
[    1.420657] Freeing unused kernel memory: 2024K
[    1.420891] Freeing unused kernel memory: 84K
[    1.422607] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.422607] x86/mm: Checking user space page tables
[    1.423970] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.467172] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    1.468526] acpi device:3b: registered as cooling_device9
[    1.468666] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:38/LNXVIDEO:00/input/input5
[    1.482784] ahci 0000:00:1f.2: version 3.0
[    1.482949] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.490789] alx 0000:07:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [00:8c:fa:29:8c:23]
[    1.493057] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x39 impl SATA mode
[    1.493060] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst 
[    1.500668] alx 0000:07:00.0 enp7s0: renamed from eth0
[    1.528661] scsi host0: ahci
[    1.528813] scsi host1: ahci
[    1.528967] scsi host2: ahci
[    1.529071] scsi host3: ahci
[    1.529215] scsi host4: ahci
[    1.529288] scsi host5: ahci
[    1.529314] ata1: SATA max UDMA/133 abar m2048@0xc1217000 port 0xc1217100 irq 25
[    1.529315] ata2: DUMMY
[    1.529315] ata3: DUMMY
[    1.529317] ata4: SATA max UDMA/133 abar m2048@0xc1217000 port 0xc1217280 irq 25
[    1.529319] ata5: SATA max UDMA/133 abar m2048@0xc1217000 port 0xc1217300 irq 25
[    1.529320] ata6: SATA max UDMA/133 abar m2048@0xc1217000 port 0xc1217380 irq 25
[    1.534836] [drm] radeon kernel modesetting enabled.
[    1.536587] AMD IOMMUv2 driver by Joerg Roedel <jroedel@xxxxxxx>
[    1.536587] AMD IOMMUv2 functionality not available on this system
[    1.539114] CRAT table not found
[    1.539114] Finished initializing topology ret=0
[    1.539129] kfd kfd: Initialized module
[    1.539251] checking generic (b0000000 300000) vs hw (b0000000 10000000)
[    1.539252] fb: switching to radeondrmfb from VESA VGA
[    1.539271] Console: switching to colour dummy device 80x25
[    1.539487] [drm] initializing kernel modesetting (TURKS 0x1002:0x6840 0x1179:0xFB22 0x00).
[    1.539542] ATOM BIOS: Toshiba/IEC
[    1.539632] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[    1.539633] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[    1.539636] [drm] Detected VRAM RAM=2048M, BAR=256M
[    1.539636] [drm] RAM width 128bits DDR
[    1.539676] [TTM] Zone  kernel: Available graphics memory: 8190094 kiB
[    1.539677] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    1.539677] [TTM] Initializing pool allocator
[    1.539680] [TTM] Initializing DMA pool allocator
[    1.539695] [drm] radeon: 2048M of VRAM memory ready
[    1.539696] [drm] radeon: 1024M of GTT memory ready.
[    1.539702] [drm] Loading TURKS Microcode
[    1.539758] [drm] Internal thermal controller with fan control
[    1.541679] [drm] radeon: dpm initialized
[    1.541726] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    1.542093] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    1.551899] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[    1.551996] radeon 0000:01:00.0: WB enabled
[    1.551998] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff8812b0e8ac00
[    1.552007] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff8812b0e8ac0c
[    1.552422] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffb05602832118
[    1.552423] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.552424] [drm] Driver supports precise vblank timestamp query.
[    1.552425] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    1.552457] radeon 0000:01:00.0: radeon: using MSI.
[    1.552479] [drm] radeon: irq initialized.
[    1.568785] [drm] ring test on 0 succeeded in 1 usecs
[    1.568792] [drm] ring test on 3 succeeded in 4 usecs
[    1.676007] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.692006] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.744715] [drm] ring test on 5 succeeded in 2 usecs
[    1.744720] [drm] UVD initialized successfully.
[    1.744926] [drm] ib test on ring 0 succeeded in 0 usecs
[    1.744979] [drm] ib test on ring 3 succeeded in 0 usecs
[    1.842322] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.842460] ata1.00: supports DRM functions and may not be fully accessible
[    1.842835] ata1.00: disabling queued TRIM support
[    1.842837] ata1.00: ATA-9: Samsung SSD 840 EVO 500GB, EXT0DB6Q, max UDMA/133
[    1.842838] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.843358] ata1.00: supports DRM functions and may not be fully accessible
[    1.843727] ata1.00: disabling queued TRIM support
[    1.844113] ata1.00: configured for UDMA/133
[    1.844323] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 840  DB6Q PQ: 0 ANSI: 5
[    1.895242] [drm] ib test on ring 5 succeeded
[    1.920635] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.920637] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.921044] hub 1-1:1.0: USB hub found
[    1.921129] hub 1-1:1.0: 6 ports detected
[    1.932310] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.932319] sd 0:0:0:0: [sda] Write Protect is off
[    1.932321] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.932334] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.932344] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.933471]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[    1.934282] sd 0:0:0:0: [sda] supports TCG Opal
[    1.934284] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.960108] [drm] radeon atom DIG backlight initialized
[    1.960111] [drm] Radeon Display Connectors
[    1.960113] [drm] Connector 0:
[    1.960113] [drm]   LVDS-1
[    1.960115] [drm]   DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[    1.960115] [drm]   Encoders:
[    1.960116] [drm]     LCD1: INTERNAL_UNIPHY
[    1.960116] [drm] Connector 1:
[    1.960117] [drm]   HDMI-A-1
[    1.960117] [drm]   HPD1
[    1.960118] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    1.960119] [drm]   Encoders:
[    1.960119] [drm]     DFP1: INTERNAL_UNIPHY1
[    1.960120] [drm] Connector 2:
[    1.960120] [drm]   VGA-1
[    1.960121] [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[    1.960122] [drm]   Encoders:
[    1.960122] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    1.980373] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.980374] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.980643] hub 2-1:1.0: USB hub found
[    1.980737] hub 2-1:1.0: 6 ports detected
[    2.053850] [drm] fb mappable at 0xB0363000
[    2.053851] [drm] vram apper at 0xB0000000
[    2.053851] [drm] size 8294400
[    2.053852] [drm] fb depth is 24
[    2.053852] [drm]    pitch is 7680
[    2.054005] fbcon: radeondrmfb (fb0) is primary device
[    2.054080] Console: switching to colour frame buffer device 170x48
[    2.054105] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    2.068313] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[    2.173051] psmouse serio1: synaptics: queried max coordinates: x [..5634], y [..4598]
[    2.208089] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    2.230119] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400/0x0, board id: 1680, fw id: 706145
[    2.247339] ata4: SATA link down (SStatus 0 SControl 300)
[    2.265403] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    2.316970] usb 1-1.1: New USB device found, idVendor=0bda, idProduct=0129
[    2.316975] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.316978] usb 1-1.1: Product: USB2.0-CRW
[    2.316981] usb 1-1.1: Manufacturer: Generic
[    2.316983] usb 1-1.1: SerialNumber: 20100201396000000
[    2.322709] usbcore: registered new interface driver rtsx_usb
[    2.331998] tsc: Refined TSC clocksource calibration: 2394.557 MHz
[    2.332005] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2284219ce66, max_idle_ns: 440795287462 ns
[    2.396088] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[    2.436140] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[    2.456554] usb 4-2: New USB device found, idVendor=0451, idProduct=8046
[    2.456557] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.457037] hub 4-2:1.0: USB hub found
[    2.457555] hub 4-2:1.0: 4 ports detected
[    2.563404] ata5: SATA link down (SStatus 0 SControl 300)
[    2.576048] usb 3-2: new high-speed USB device number 3 using xhci_hcd
[    2.582035] usb 1-1.3: New USB device found, idVendor=10f1, idProduct=1a43
[    2.582038] usb 1-1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    2.582039] usb 1-1.3: Product: TOSHIBA Web Camera - HD
[    2.582040] usb 1-1.3: Manufacturer: Importek
[    2.716646] usb 3-2: New USB device found, idVendor=0451, idProduct=8044
[    2.716649] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    2.716650] usb 3-2: SerialNumber: 35030861EF9B
[    2.716939] hub 3-2:1.0: USB hub found
[    2.716965] hub 3-2:1.0: 4 ports detected
[    2.836161] usb 4-1: new SuperSpeed USB device number 3 using xhci_hcd
[    2.856914] usb 4-1: New USB device found, idVendor=0bc2, idProduct=ab2e
[    2.856918] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.856921] usb 4-1: Product: Ultra Slim PL
[    2.856923] usb 4-1: Manufacturer: Seagate
[    2.856926] usb 4-1: SerialNumber: NA9G2ARN
[    2.860011] usbcore: registered new interface driver usb-storage
[    2.861886] scsi host6: uas
[    2.861935] usbcore: registered new interface driver uas
[    2.862297] scsi 6:0:0:0: Direct-Access     Seagate  Ultra Slim PL    0109 PQ: 0 ANSI: 6
[    2.878297] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.881918] ata6.00: ATAPI: TSSTcorp CDDVDW SN-208FB, SB00, max UDMA/100
[    2.884607] ata6.00: configured for UDMA/100
[    2.887273] scsi: waiting for bus probes to complete ...
[    2.896514] sd 6:0:0:0: Attached scsi generic sg1 type 0
[    2.897149] sd 6:0:0:0: [sdb] 3907029167 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    2.897165] sd 6:0:0:0: [sdb] 4096-byte physical blocks
[    2.897341] sd 6:0:0:0: [sdb] Write Protect is off
[    2.897346] sd 6:0:0:0: [sdb] Mode Sense: 53 00 00 08
[    2.897649] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    2.899306] scsi 5:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-208FB  SB00 PQ: 0 ANSI: 5
[    2.900976]  sdb: sdb1
[    2.902312] sd 6:0:0:0: [sdb] Attached SCSI disk
[    2.934688] sr 5:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.934691] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.934872] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    2.934953] sr 5:0:0:0: Attached scsi generic sg2 type 5
[    2.976033] usb 3-3: new full-speed USB device number 4 using xhci_hcd
[    3.118208] usb 3-3: New USB device found, idVendor=046d, idProduct=c534
[    3.118210] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.118211] usb 3-3: Product: USB Receiver
[    3.118212] usb 3-3: Manufacturer: Logitech
[    3.196013] usb 3-2.2: new full-speed USB device number 5 using xhci_hcd
[    3.262810] hidraw: raw HID events driver (C) Jiri Kosina
[    3.266812] usbcore: registered new interface driver usbhid
[    3.266813] usbhid: USB HID core driver
[    3.268216] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:046D:C534.0001/input/input7
[    3.328197] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
[    3.328379] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:046D:C534.0002/input/input8
[    3.356376] clocksource: Switched to clocksource tsc
[    3.388415] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
[    3.484115] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[    3.536186] usb 3-2.2: New USB device found, idVendor=413c, idProduct=a503
[    3.536188] usb 3-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.536190] usb 3-2.2: Product: Dell AC511 USB SoundBar
[    3.536191] usb 3-2.2: Manufacturer: Dell
[    3.546728] input: Dell Dell AC511 USB SoundBar as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.2/3-2.2:1.3/0003:413C:A503.0003/input/input9
[    3.565410] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    3.588272] systemd[1]: Detected architecture x86-64.
[    3.588413] systemd[1]: Set hostname to <harutyun-pc>.
[    3.608084] hid-generic 0003:413C:A503.0003: input,hidraw2: USB HID v1.00 Device [Dell Dell AC511 USB SoundBar] on usb-0000:00:14.0-2.2/input3
[    3.655117] systemd[1]: Reached target Encrypted Volumes.
[    3.655258] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.655268] systemd[1]: Reached target Remote File Systems (Pre).
[    3.655302] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[    3.655353] systemd[1]: Listening on Journal Audit Socket.
[    3.655361] systemd[1]: Reached target User and Group Name Lookups.
[    3.655392] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.671054] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro
[    3.687959] lp: driver loaded but no devices found
[    3.691799] ppdev: user-space parallel port driver
[    3.700648] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.712566] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[    3.728788] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    3.736533] systemd-journald[320]: Received request to flush runtime journal from PID 1
[    3.902608] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170531/utaddress-247)
[    3.902615] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.902618] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247)
[    3.902622] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.902623] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247)
[    3.902626] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.902627] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247)
[    3.902630] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.902631] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    3.902633] lpc_ich 0000:00:1f.0: No MFD cells added
[    3.903351] toshiba_bluetooth: Toshiba ACPI Bluetooth device driver
[    3.906489] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.955679] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    3.955680] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    3.955681] RAPL PMU: hw unit of domain package 2^-16 Joules
[    3.955682] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    3.990275] AVX version of gcm_enc/dec engaged.
[    3.990276] AES CTR mode by8 optimization enabled
[    4.015044] media: Linux media interface: v0.10
[    4.025024] ath: phy0: ASPM enabled: 0x42
[    4.025026] ath: EEPROM regdomain: 0x65
[    4.025027] ath: EEPROM indicates we should expect a direct regpair map
[    4.025029] ath: Country alpha2 being used: 00
[    4.025029] ath: Regpair used: 0x65
[    4.027375] Linux video capture interface: v2.00
[    4.027738] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    4.031789] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    4.035462] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffb05603280000, irq=17
[    4.036377] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input10
[    4.043123] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    4.043125] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.043126] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    4.043127] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    4.043128] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    4.043130] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    4.043131] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    4.053079] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    4.053143] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    4.063608] usbcore: registered new interface driver snd-usb-audio
[    4.105636] intel_rapl: Found RAPL domain package
[    4.105637] intel_rapl: Found RAPL domain core
[    4.105641] intel_rapl: RAPL package 0 domain package locked by BIOS
[    4.114221] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - HD (10f1:1a43)
[    4.114877] ath9k 0000:08:00.0 wlp8s0: renamed from wlan0
[    4.132525] uvcvideo 1-1.3:1.0: Entity type for entity Extension 3 was not initialized!
[    4.132527] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not initialized!
[    4.132529] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized!
[    4.132605] input: TOSHIBA Web Camera - HD: TOSHIB as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input13
[    4.132664] usbcore: registered new interface driver uvcvideo
[    4.132665] USB Video Class driver (1.1.1)
[    4.458300] random: crng init done
[    4.709474] Adding 7999484k swap on /dev/sda6.  Priority:-1 extents:1 across:7999484k SSFS
[    4.756213] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    4.767006] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    4.985311] audit: type=1400 audit(1552774073.985:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=1114 comm="apparmor_parser"
[    4.986629] audit: type=1400 audit(1552774073.986:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ipsec/charon" pid=1116 comm="apparmor_parser"
[    4.986714] audit: type=1400 audit(1552774073.986:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ipsec/stroke" pid=1118 comm="apparmor_parser"
[    4.987498] audit: type=1400 audit(1552774073.987:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1110 comm="apparmor_parser"
[    4.987500] audit: type=1400 audit(1552774073.987:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=1110 comm="apparmor_parser"
[    4.989342] audit: type=1400 audit(1552774073.989:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1121 comm="apparmor_parser"
[    4.990065] audit: type=1400 audit(1552774073.990:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1111 comm="apparmor_parser"
[    4.990068] audit: type=1400 audit(1552774073.990:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1111 comm="apparmor_parser"
[    4.990070] audit: type=1400 audit(1552774073.990:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1111 comm="apparmor_parser"
[    5.550865] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[    5.566251] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[    5.570257] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
[    5.570723] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
[    5.571585] alx 0000:07:00.0 enp7s0: NIC Up: 1 Gbps Full
[    5.571808] IPv6: ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready
[    5.692699] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[    6.172013] usb 1-1.2: new full-speed USB device number 5 using ehci-pci
[    6.282097] usb 1-1.2: New USB device found, idVendor=0930, idProduct=0219
[    6.282099] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.282100] usb 1-1.2: Product: Bluetooth USB Host Controller
[    6.282101] usb 1-1.2: Manufacturer: Atheros Communications
[    6.282102] usb 1-1.2: SerialNumber: Alaska Day 2006
[    6.308931] Bluetooth: Core ver 2.22
[    6.308961] NET: Registered protocol family 31
[    6.308962] Bluetooth: HCI device and connection manager initialized
[    6.308965] Bluetooth: HCI socket layer initialized
[    6.308967] Bluetooth: L2CAP socket layer initialized
[    6.308971] Bluetooth: SCO socket layer initialized
[    6.322208] usbcore: registered new interface driver btusb
[    6.326230] usbcore: registered new interface driver ath3k
[    6.351235] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.351237] Bluetooth: BNEP filters: protocol multicast
[    6.351240] Bluetooth: BNEP socket layer initialized
[    6.570313] Bluetooth: RFCOMM TTY layer initialized
[    6.570318] Bluetooth: RFCOMM socket layer initialized
[    6.570323] Bluetooth: RFCOMM ver 1.11
[   11.035214] vmmon: loading out-of-tree module taints kernel.
[   11.035288] vmmon: module verification failed: signature and/or required key missing - tainting kernel
[   11.035742] /dev/vmmon[2177]: Module vmmon: registered with major=10 minor=165
[   11.035745] /dev/vmmon[2177]: Using tsc_khz as TSC frequency: 2394557
[   11.035746] /dev/vmmon[2177]: Module vmmon: initialized
[   11.050924] NET: Registered protocol family 15
[   11.061418] vboxdrv: Found 8 processor cores
[   11.067215] Guest personality initialized and is inactive
[   11.067253] VMCI host device registered (name=vmci, major=10, minor=53)
[   11.067254] Initialized host personality
[   11.080188] vboxdrv: TSC mode is Invariant, tentative frequency 2394556103 Hz
[   11.080189] vboxdrv: Successfully loaded version 5.1.38_Ubuntu (interface 0x002a0000)
[   11.081254] Initializing XFRM netlink socket
[   11.088517] VBoxNetFlt: Successfully started.
[   11.094821] VBoxNetAdp: Successfully started.
[   11.094970] NET: Registered protocol family 40
[   11.103709] VBoxPciLinuxInit
[   11.106544] vboxpci: IOMMU not found (not registered)
[   12.211744] kauditd_printk_skb: 35 callbacks suppressed
[   12.211754] audit: type=1400 audit(1552774081.211:46): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=2464 comm="apparmor_parser"
[   12.264662] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   12.265958] Bridge firewalling registered
[   12.295784] userif-3: sent link down event.
[   12.295787] userif-3: sent link up event.
[   12.313243] Netfilter messages via NETLINK v0.30.
[   12.315564] ctnetlink v0.93: registering with nfnetlink.
[   12.356838] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[   12.520210] userif-3: sent link down event.
[   12.520212] userif-3: sent link up event.
[   13.824324] wlp8s0: authenticate with b4:fb:e4:47:e4:ce
[   13.845370] wlp8s0: send auth to b4:fb:e4:47:e4:ce (try 1/3)
[   13.856800] wlp8s0: authenticated
[   13.859996] wlp8s0: associate with b4:fb:e4:47:e4:ce (try 1/3)
[   13.864607] wlp8s0: RX AssocResp from b4:fb:e4:47:e4:ce (capab=0x431 status=0 aid=2)
[   13.864725] wlp8s0: associated
[   13.864734] IPv6: ADDRCONF(NETDEV_CHANGE): wlp8s0: link becomes ready
[   13.867048] ath: EEPROM regdomain: 0x8348
[   13.867049] ath: EEPROM indicates we should expect a country code
[   13.867049] ath: doing EEPROM country->regdmn map search
[   13.867050] ath: country maps to regdmn code: 0x3a
[   13.867051] ath: Country alpha2 being used: US
[   13.867051] ath: Regpair used: 0x3a
[   13.867052] ath: regdomain 0x8348 dynamically updated by country IE
[   14.083553] userif-3: sent link down event.
[   14.083556] userif-3: sent link up event.
[   21.320998] [UFW BLOCK] IN=wlp8s0 OUT= MAC=01:00:5e:00:00:01:b6:fb:e4:46:e4:ce:08:00 SRC=192.168.169.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=5185 PROTO=2 
[   99.199879] xhci_hcd 0000:00:14.0: Cannot set link state.
[   99.199891] usb usb4-port1: cannot disable (err = -32)
[   99.199900] usb 4-1: USB disconnect, device number 3
[   99.271105] [UFW BLOCK] IN=enp7s0 OUT= MAC= SRC=fe80:0000:0000:0000:a45e:6173:be5e:65c3 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=220220 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[   99.271120] [UFW BLOCK] IN=enp7s0 OUT= MAC= SRC=fe80:0000:0000:0000:a45e:6173:be5e:65c3 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=42484 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[   99.271133] [UFW BLOCK] IN=wlp8s0 OUT= MAC= SRC=fe80:0000:0000:0000:f75a:a3ec:819a:ab44 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=776873 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[   99.271159] [UFW BLOCK] IN=wlp8s0 OUT= MAC= SRC=fe80:0000:0000:0000:f75a:a3ec:819a:ab44 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=917212 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[   99.271185] [UFW BLOCK] IN=vmnet1 OUT= MAC= SRC=fe80:0000:0000:0000:0250:56ff:fec0:0001 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=647330 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[   99.271196] [UFW BLOCK] IN=vmnet1 OUT= MAC= SRC=fe80:0000:0000:0000:0250:56ff:fec0:0001 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=337432 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[   99.271207] [UFW BLOCK] IN=vmnet8 OUT= MAC= SRC=fe80:0000:0000:0000:0250:56ff:fec0:0008 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=288672 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[   99.271228] [UFW BLOCK] IN=vmnet8 OUT= MAC= SRC=fe80:0000:0000:0000:0250:56ff:fec0:0008 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=899115 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[   99.281547] [UFW BLOCK] IN=enp7s0 OUT= MAC= SRC=fe80:0000:0000:0000:a45e:6173:be5e:65c3 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=220220 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[   99.281571] [UFW BLOCK] IN=enp7s0 OUT= MAC= SRC=fe80:0000:0000:0000:a45e:6173:be5e:65c3 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=42484 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[    0.000000] microcode: microcode updated early to revision 0x20, date = 2018-04-10
[    0.000000] random: get_random_bytes called from start_kernel+0x42/0x507 with crng_init=0
[    0.000000] Linux version 4.13.0-45-generic (buildd@lgw01-amd64-011) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9)) #50~16.04.1-Ubuntu SMP Wed May 30 11:18:27 UTC 2018 (Ubuntu 4.13.0-45.50~16.04.1-generic 4.13.16)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.13.0-45-generic root=UUID=aed0a586-4802-41ed-b85a-dce4c8765b14 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a9a6dfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a9a6e000-0x00000000aa976fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000aa977000-0x00000000aa999fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000aa99a000-0x00000000aa99efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000aa99f000-0x00000000af2befff] usable
[    0.000000] BIOS-e820: [mem 0x00000000af2bf000-0x00000000af6befff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000af6bf000-0x00000000af7befff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000af7bf000-0x00000000af7fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000af7ff000-0x00000000af7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000af800000-0x00000000afffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000044effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: TOSHIBA SATELLITE L855/Portable PC, BIOS 6.70 04/15/2013
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x44f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0AF800000 mask FFF800000 uncachable
[    0.000000]   3 base 0B0000000 mask FF0000000 uncachable
[    0.000000]   4 base 0FF800000 mask FFF800000 write-protect
[    0.000000]   5 base 100000000 mask F00000000 write-back
[    0.000000]   6 base 200000000 mask E00000000 write-back
[    0.000000]   7 base 400000000 mask F80000000 write-back
[    0.000000]   8 base 44F000000 mask FFF000000 uncachable
[    0.000000]   9 base 450000000 mask FF0000000 uncachable
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0xaf800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff880e800fe1b0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880e80097000] 97000 size 24576
[    0.000000] BRK [0x3c572c000, 0x3c572cfff] PGTABLE
[    0.000000] BRK [0x3c572d000, 0x3c572dfff] PGTABLE
[    0.000000] BRK [0x3c572e000, 0x3c572efff] PGTABLE
[    0.000000] BRK [0x3c572f000, 0x3c572ffff] PGTABLE
[    0.000000] BRK [0x3c5730000, 0x3c5730fff] PGTABLE
[    0.000000] BRK [0x3c5731000, 0x3c5731fff] PGTABLE
[    0.000000] BRK [0x3c5732000, 0x3c5732fff] PGTABLE
[    0.000000] BRK [0x3c5733000, 0x3c5733fff] PGTABLE
[    0.000000] BRK [0x3c5734000, 0x3c5734fff] PGTABLE
[    0.000000] BRK [0x3c5735000, 0x3c5735fff] PGTABLE
[    0.000000] BRK [0x3c5736000, 0x3c5736fff] PGTABLE
[    0.000000] BRK [0x3c5737000, 0x3c5737fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x31e02000-0x34ef8fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 TOSINV)
[    0.000000] ACPI: XSDT 0x00000000AF7FE210 0000AC (v01 TOSINV TOSINV00 00000001      01000013)
[    0.000000] ACPI: FACP 0x00000000AF7FB000 00010C (v05 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: DSDT 0x00000000AF7EF000 008404 (v01 TOSINV TOSINV00 00000000 ACPI 00040000)
[    0.000000] ACPI: FACS 0x00000000AF7BB000 000040
[    0.000000] ACPI: UEFI 0x00000000AF7FD000 000236 (v01 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: ASF! 0x00000000AF7FC000 0000A5 (v32 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: HPET 0x00000000AF7FA000 000038 (v01 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: APIC 0x00000000AF7F9000 00008C (v03 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: MCFG 0x00000000AF7F8000 00003C (v01 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: SLIC 0x00000000AF7EE000 000176 (v01 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: WDAT 0x00000000AF7ED000 000224 (v01 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000AF7EB000 001068 (v01 INSYDE CR CRB   00001000 ACPI 00040000)
[    0.000000] ACPI: BOOT 0x00000000AF7E9000 000028 (v01 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: ASPT 0x00000000AF7E7000 000034 (v07 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: DBGP 0x00000000AF7E6000 000034 (v01 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000AF7DF000 006C42 (v01 TOSINV TsbOdm   00001000 ACPI 00040000)
[    0.000000] ACPI: FPDT 0x00000000AF7DD000 000044 (v01 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: MSDM 0x00000000AF7DC000 000055 (v03 TOSINV TOSINV00 00000001 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000AF7DB000 000918 (v01 INSYDE CR CRB   00003000 ACPI 00040000)
[    0.000000] ACPI: SSDT 0x00000000AF7DA000 000B22 (v01 INSYDE CR CRB   00003000 ACPI 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000044effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x44efc9000-0x44eff3fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000044effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000a9a6dfff]
[    0.000000]   node   0: [mem 0x00000000aa977000-0x00000000aa999fff]
[    0.000000]   node   0: [mem 0x00000000aa99f000-0x00000000af2befff]
[    0.000000]   node   0: [mem 0x00000000af7ff000-0x00000000af7fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000044effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000044effffff]
[    0.000000] On node 0 totalpages: 4182862
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11087 pages used for memmap
[    0.000000]   DMA32 zone: 709554 pages, LIFO batch:31
[    0.000000]   Normal zone: 54208 pages used for memmap
[    0.000000]   Normal zone: 3469312 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xa9a6e000-0xaa976fff]
[    0.000000] PM: Registered nosave memory: [mem 0xaa99a000-0xaa99efff]
[    0.000000] PM: Registered nosave memory: [mem 0xaf2bf000-0xaf6befff]
[    0.000000] PM: Registered nosave memory: [mem 0xaf6bf000-0xaf7befff]
[    0.000000] PM: Registered nosave memory: [mem 0xaf7bf000-0xaf7fefff]
[    0.000000] PM: Registered nosave memory: [mem 0xaf800000-0xafffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb0000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[    0.000000] e820: [mem 0xb0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 45 pages/cpu @ffff8812cec00000 s146584 r8192 d29544 u262144
[    0.000000] pcpu-alloc: s146584 r8192 d29544 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 4117482
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.13.0-45-generic root=UUID=aed0a586-4802-41ed-b85a-dce4c8765b14 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16325536K/16731448K available (12300K kernel code, 2481K rwdata, 4012K rodata, 2368K init, 2372K bss, 405912K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 37875 entries in 148 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2394.593 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.18 BogoMIPS (lpj=9578372)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170531
[    0.014246] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.014269] Security Framework initialized
[    0.014270] Yama: becoming mindful.
[    0.014289] AppArmor: AppArmor initialized
[    0.016976] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.018285] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.018332] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.018375] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.018572] CPU: Physical Processor ID: 0
[    0.018573] CPU: Processor Core ID: 0
[    0.018579] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.018579] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.018580] FEATURE SPEC_CTRL Present
[    0.018584] mce: CPU supports 9 MCE banks
[    0.018598] process: using mwait in idle threads
[    0.018601] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.018602] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.018603] Spectre V2 mitigation: Mitigation: Full generic retpoline
[    0.018604] Spectre V2 mitigation: Speculation control IBPB supported IBRS supported
[    0.018605] Spectre V2 mitigation: Retpoline compiled kernel.  Defaulting IBRS to disabled
[    0.018606] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.018724] Freeing SMP alternatives memory: 36K
[    0.020063] smpboot: Max logical packages: 2
[    0.020138] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.020587] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.062928] TSC deadline timer enabled
[    0.062932] smpboot: CPU0: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.062996] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.063017] ... version:                3
[    0.063017] ... bit width:              48
[    0.063018] ... generic registers:      4
[    0.063019] ... value mask:             0000ffffffffffff
[    0.063019] ... max period:             00007fffffffffff
[    0.063020] ... fixed-purpose events:   3
[    0.063020] ... event mask:             000000070000000f
[    0.063055] Hierarchical SRCU implementation.
[    0.063932] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.063949] smp: Bringing up secondary CPUs ...
[    0.064000] x86: Booting SMP configuration:
[    0.064000] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.078835] smp: Brought up 1 node, 8 CPUs
[    0.078835] smpboot: Total of 8 processors activated (38313.48 BogoMIPS)
[    0.080463] devtmpfs: initialized
[    0.080463] x86/mm: Memory block size: 128MB
[    0.081244] evm: security.selinux
[    0.081244] evm: security.SMACK64
[    0.081245] evm: security.SMACK64EXEC
[    0.081245] evm: security.SMACK64TRANSMUTE
[    0.081246] evm: security.SMACK64MMAP
[    0.081246] evm: security.ima
[    0.081247] evm: security.capability
[    0.081261] PM: Registering ACPI NVS region [mem 0xa9a6e000-0xaa976fff] (15765504 bytes)
[    0.081261] PM: Registering ACPI NVS region [mem 0xaa99a000-0xaa99efff] (20480 bytes)
[    0.081261] PM: Registering ACPI NVS region [mem 0xaf6bf000-0xaf7befff] (1048576 bytes)
[    0.081261] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.081261] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.081261] pinctrl core: initialized pinctrl subsystem
[    0.081261] RTC time: 22:07:49, date: 03/16/19
[    0.081261] NET: Registered protocol family 16
[    0.081261] cpuidle: using governor ladder
[    0.081261] cpuidle: using governor menu
[    0.081261] PCCT header not found.
[    0.081261] Simple Boot Flag at 0x44 set to 0x1
[    0.081261] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.081261] ACPI: bus type PCI registered
[    0.081261] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.081261] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.081261] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.081261] PCI: Using configuration type 1 for base access
[    0.081261] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.084223] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.084225] ACPI: Added _OSI(Module Device)
[    0.084225] ACPI: Added _OSI(Processor Device)
[    0.084225] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.084225] ACPI: Added _OSI(Processor Aggregator Device)
[    0.084238] ACPI: Executed 1 blocks of module-level executable AML code
[    0.101702] ACPI Error: Needed type [Reference], found [Integer] ffff8812be180d38 (20170531/exresop-103)
[    0.101702] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20170531/dswexec-461)
[    0.101702] ACPI Error: Method parse/execution failed \_PR.CPU0._PDC, AE_AML_OPERAND_TYPE (20170531/psparse-550)
[    0.101702] ACPI: Dynamic OEM Table Load:
[    0.101702] ACPI: SSDT 0xFFFF8812BBD01C00 000303 (v01 PmRef  ApIst    00003000 INTL 20120215)
[    0.101706] ACPI: Dynamic OEM Table Load:
[    0.101706] ACPI: SSDT 0xFFFF8812BC3EFA00 000119 (v01 PmRef  ApCst    00003000 INTL 20120215)
[    0.101706] ACPI: Interpreter enabled
[    0.101706] ACPI: (supports S0 S3 S4 S5)
[    0.101706] ACPI: Using IOAPIC for interrupt routing
[    0.101706] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.101706] ACPI: Enabled 9 GPEs in block 00 to 3F
[    0.104107] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
[    0.109927] ACPI: Power Resource [FN00] (on)
[    0.110529] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.110534] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.110661] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.111124] PCI host bridge to bus 0000:00
[    0.111126] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.111128] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.111129] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.111131] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfeafffff window]
[    0.111133] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.111141] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.111229] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.111265] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.111361] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.111386] pci 0000:00:14.0: reg 0x10: [mem 0xc1200000-0xc120ffff 64bit]
[    0.111458] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.111533] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.111559] pci 0000:00:16.0: reg 0x10: [mem 0xc1214000-0xc121400f 64bit]
[    0.111634] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.111712] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.111734] pci 0000:00:1a.0: reg 0x10: [mem 0xc1219000-0xc12193ff]
[    0.111820] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.111894] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.111917] pci 0000:00:1b.0: reg 0x10: [mem 0xc1210000-0xc1213fff 64bit]
[    0.111991] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.112077] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.112162] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.112241] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.112325] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.112412] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.112435] pci 0000:00:1d.0: reg 0x10: [mem 0xc1218000-0xc12183ff]
[    0.112520] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.112594] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[    0.112770] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.112789] pci 0000:00:1f.2: reg 0x10: [io  0x4048-0x404f]
[    0.112797] pci 0000:00:1f.2: reg 0x14: [io  0x4054-0x4057]
[    0.112805] pci 0000:00:1f.2: reg 0x18: [io  0x4040-0x4047]
[    0.112813] pci 0000:00:1f.2: reg 0x1c: [io  0x4050-0x4053]
[    0.112821] pci 0000:00:1f.2: reg 0x20: [io  0x4020-0x403f]
[    0.112829] pci 0000:00:1f.2: reg 0x24: [mem 0xc1217000-0xc12177ff]
[    0.112871] pci 0000:00:1f.2: PME# supported from D3hot
[    0.112940] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.112959] pci 0000:00:1f.3: reg 0x10: [mem 0xc1215000-0xc12150ff 64bit]
[    0.112980] pci 0000:00:1f.3: reg 0x20: [io  0x4000-0x401f]
[    0.113108] pci 0000:01:00.0: [1002:6840] type 00 class 0x030000
[    0.113126] pci 0000:01:00.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.113136] pci 0000:01:00.0: reg 0x18: [mem 0xc0000000-0xc001ffff 64bit]
[    0.113142] pci 0000:01:00.0: reg 0x20: [io  0x3000-0x30ff]
[    0.113154] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[    0.113190] pci 0000:01:00.0: supports D1 D2
[    0.113249] pci 0000:01:00.1: [1002:aa90] type 00 class 0x040300
[    0.113267] pci 0000:01:00.1: reg 0x10: [mem 0xc0020000-0xc0023fff 64bit]
[    0.113325] pci 0000:01:00.1: supports D1 D2
[    0.124026] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.124031] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.124035] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xc0ffffff]
[    0.124041] pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.124129] pci 0000:07:00.0: [1969:1091] type 00 class 0x020000
[    0.124172] pci 0000:07:00.0: reg 0x10: [mem 0xc1100000-0xc113ffff 64bit]
[    0.124186] pci 0000:07:00.0: reg 0x18: [io  0x2000-0x207f]
[    0.124328] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.136036] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.136044] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.136060] pci 0000:00:1c.0:   bridge window [mem 0xc1100000-0xc11fffff]
[    0.136138] pci 0000:08:00.0: [168c:0032] type 00 class 0x028000
[    0.136181] pci 0000:08:00.0: reg 0x10: [mem 0xc1000000-0xc107ffff 64bit]
[    0.136245] pci 0000:08:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.136332] pci 0000:08:00.0: supports D1 D2
[    0.136334] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.148034] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.148045] pci 0000:00:1c.1:   bridge window [mem 0xc1000000-0xc10fffff]
[    0.148622] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.148674] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.148724] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.148773] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.148822] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.148871] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.148919] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.148968] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.149341] SCSI subsystem initialized
[    0.149355] libata version 3.00 loaded.
[    0.149355] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.149355] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.149355] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.149355] vgaarb: loaded
[    0.149355] ACPI: bus type USB registered
[    0.149355] usbcore: registered new interface driver usbfs
[    0.149355] usbcore: registered new interface driver hub
[    0.149355] usbcore: registered new device driver usb
[    0.149355] EDAC MC: Ver: 3.0.0
[    0.149355] PCI: Using ACPI for IRQ routing
[    0.156116] PCI: pci_cache_line_size set to 64 bytes
[    0.156162] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.156163] e820: reserve RAM buffer [mem 0xa9a6e000-0xabffffff]
[    0.156164] e820: reserve RAM buffer [mem 0xaa99a000-0xabffffff]
[    0.156165] e820: reserve RAM buffer [mem 0xaf2bf000-0xafffffff]
[    0.156166] e820: reserve RAM buffer [mem 0xaf800000-0xafffffff]
[    0.156167] e820: reserve RAM buffer [mem 0x44f000000-0x44fffffff]
[    0.156243] NetLabel: Initializing
[    0.156244] NetLabel:  domain hash size = 128
[    0.156245] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.156260] NetLabel:  unlabeled traffic allowed by default
[    0.156426] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.156431] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.158454] clocksource: Switched to clocksource hpet
[    0.165727] VFS: Disk quotas dquot_6.6.0
[    0.165747] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.165837] AppArmor: AppArmor Filesystem Enabled
[    0.165879] pnp: PnP ACPI init
[    0.166029] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.166031] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.166032] system 00:00: [io  0xffff] has been reserved
[    0.166034] system 00:00: [io  0xffff] has been reserved
[    0.166036] system 00:00: [io  0x0400-0x0453] has been reserved
[    0.166037] system 00:00: [io  0x0458-0x047f] could not be reserved
[    0.166039] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.166040] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.166045] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.166068] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.166107] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.166110] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.166130] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.166150] pnp 00:04: Plug and Play ACPI device, IDs TOS0310 SYN1900 SYN0002 PNP0f13 (active)
[    0.166333] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.166335] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.166337] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.166338] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.166340] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.166342] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.166343] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.166345] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[    0.166347] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.166348] system 00:05: [mem 0xc1300000-0xc1300fff] has been reserved
[    0.166350] system 00:05: [mem 0xff700000-0xff7001ff] has been reserved
[    0.166353] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.166613] system 00:06: [mem 0x20000000-0x201fffff] could not be reserved
[    0.166615] system 00:06: [mem 0x40004000-0x40004fff] could not be reserved
[    0.166618] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.166667] pnp: PnP ACPI: found 7 devices
[    0.172937] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.172942] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[    0.172945] pci 0000:08:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    0.172971] pci 0000:01:00.0: BAR 6: assigned [mem 0xc0040000-0xc005ffff pref]
[    0.172973] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    0.172975] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
[    0.172978] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xc0ffffff]
[    0.172980] pci 0000:00:01.0:   bridge window [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.172984] pci 0000:00:1c.0: PCI bridge to [bus 07]
[    0.172987] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.172992] pci 0000:00:1c.0:   bridge window [mem 0xc1100000-0xc11fffff]
[    0.173001] pci 0000:08:00.0: BAR 6: assigned [mem 0xc1080000-0xc108ffff pref]
[    0.173003] pci 0000:00:1c.1: PCI bridge to [bus 08]
[    0.173008] pci 0000:00:1c.1:   bridge window [mem 0xc1000000-0xc10fffff]
[    0.173017] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.173019] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.173020] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.173022] pci_bus 0000:00: resource 7 [mem 0xb0000000-0xfeafffff window]
[    0.173023] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.173025] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc0ffffff]
[    0.173026] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.173028] pci_bus 0000:07: resource 0 [io  0x2000-0x2fff]
[    0.173029] pci_bus 0000:07: resource 1 [mem 0xc1100000-0xc11fffff]
[    0.173031] pci_bus 0000:08: resource 1 [mem 0xc1000000-0xc10fffff]
[    0.173116] NET: Registered protocol family 2
[    0.173277] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.173480] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.173591] TCP: Hash tables configured (established 131072 bind 65536)
[    0.173626] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.173669] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.173735] NET: Registered protocol family 1
[    0.568155] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.568160] pci 0000:07:00.0: set MSI_INTX_DISABLE_BUG flag
[    0.568168] PCI: CLS 64 bytes, default 64
[    0.568214] Unpacking initramfs...
[    1.315148] Freeing initrd memory: 50140K
[    1.315155] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.315159] software IO TLB [mem 0xab2bf000-0xaf2bf000] (64MB) mapped at [ffff880f2b2bf000-ffff880f2f2befff]
[    1.315440] Scanning for low memory corruption every 60 seconds
[    1.315749] audit: initializing netlink subsys (disabled)
[    1.315795] audit: type=2000 audit(1552774070.315:1): state=initialized audit_enabled=0 res=1
[    1.316184] Initialise system trusted keyrings
[    1.316195] Key type blacklist registered
[    1.316233] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    1.317304] zbud: loaded
[    1.317778] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.317902] fuse init (API version 7.26)
[    1.319258] Key type asymmetric registered
[    1.319259] Asymmetric key parser 'x509' registered
[    1.319287] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.319322] io scheduler noop registered
[    1.319323] io scheduler deadline registered
[    1.319347] io scheduler cfq registered (default)
[    1.319933] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    1.319933] vesafb: scrolling: redraw
[    1.319935] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    1.319940] pmd_set_huge: Cannot satisfy [mem 0xb0000000-0xb0200000] with a huge-page mapping due to MTRR override.
[    1.319947] vesafb: framebuffer at 0xb0000000, mapped to 0xffffb05602400000, using 3072k, total 3072k
[    1.320036] Console: switching to colour frame buffer device 128x48
[    1.320052] fb0: VESA VGA frame buffer device
[    1.320064] intel_idle: MWAIT substates: 0x21120
[    1.320065] intel_idle: v0.4.1 model 0x3A
[    1.320348] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.320440] ACPI: AC Adapter [ADP0] (on-line)
[    1.320499] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.320508] ACPI: Power Button [PWRB]
[    1.320798] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    1.321040] ACPI: Lid Switch [LID0]
[    1.321073] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.321091] ACPI: Power Button [PWRF]
[    1.321625] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.321713] thermal LNXTHERM:00: registered as thermal_zone0
[    1.321714] ACPI: Thermal Zone [THRM] (68 C)
[    1.321739] GHES: HEST is not enabled!
[    1.321837] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.322273] ACPI: Battery Slot [BAT0] (battery present)
[    1.323293] Linux agpgart interface v0.103
[    1.325071] loop: module loaded
[    1.325210] libphy: Fixed MDIO Bus: probed
[    1.325211] tun: Universal TUN/TAP device driver, 1.6
[    1.325239] PPP generic driver version 2.4.2
[    1.325279] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.325281] ehci-pci: EHCI PCI platform driver
[    1.325381] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.325387] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.325399] ehci-pci 0000:00:1a.0: debug port 2
[    1.329299] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.329310] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc1219000
[    1.344022] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.344055] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.344057] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.344058] usb usb1: Product: EHCI Host Controller
[    1.344059] usb usb1: Manufacturer: Linux 4.13.0-45-generic ehci_hcd
[    1.344061] usb usb1: SerialNumber: 0000:00:1a.0
[    1.344259] hub 1-0:1.0: USB hub found
[    1.344267] hub 1-0:1.0: 2 ports detected
[    1.344451] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.344455] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.344466] ehci-pci 0000:00:1d.0: debug port 2
[    1.348373] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.348383] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc1218000
[    1.364100] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.364159] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.364161] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.364162] usb usb2: Product: EHCI Host Controller
[    1.364164] usb usb2: Manufacturer: Linux 4.13.0-45-generic ehci_hcd
[    1.364165] usb usb2: SerialNumber: 0000:00:1d.0
[    1.364403] hub 2-0:1.0: USB hub found
[    1.364411] hub 2-0:1.0: 2 ports detected
[    1.364519] ehci-platform: EHCI generic platform driver
[    1.364535] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.364541] ohci-pci: OHCI PCI platform driver
[    1.364551] ohci-platform: OHCI generic platform driver
[    1.364557] uhci_hcd: USB Universal Host Controller Interface driver
[    1.364736] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.364742] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.365828] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[    1.365834] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.365928] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.365930] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.365931] usb usb3: Product: xHCI Host Controller
[    1.365933] usb usb3: Manufacturer: Linux 4.13.0-45-generic xhci-hcd
[    1.365934] usb usb3: SerialNumber: 0000:00:14.0
[    1.366157] hub 3-0:1.0: USB hub found
[    1.366170] hub 3-0:1.0: 4 ports detected
[    1.366491] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.366495] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.366527] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.366529] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.366530] usb usb4: Product: xHCI Host Controller
[    1.366532] usb usb4: Manufacturer: Linux 4.13.0-45-generic xhci-hcd
[    1.366533] usb usb4: SerialNumber: 0000:00:14.0
[    1.366733] hub 4-0:1.0: USB hub found
[    1.366744] hub 4-0:1.0: 4 ports detected
[    1.367092] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    1.369913] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.369917] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.370188] mousedev: PS/2 mouse device common for all mice
[    1.370521] rtc_cmos 00:01: RTC can wake from S4
[    1.370532] rtc_cmos: probe of 00:01 failed with error -16
[    1.370548] i2c /dev entries driver
[    1.370593] device-mapper: uevent: version 1.0.3
[    1.370682] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@xxxxxxxxxx
[    1.370687] intel_pstate: Intel P-state driver initializing
[    1.371174] ledtrig-cpu: registered to indicate activity on CPUs
[    1.371638] NET: Registered protocol family 10
[    1.375817] Segment Routing with IPv6
[    1.375829] NET: Registered protocol family 17
[    1.375836] Key type dns_resolver registered
[    1.376317] RAS: Correctable Errors collector initialized.
[    1.376362] microcode: sig=0x306a9, pf=0x10, revision=0x20
[    1.376500] microcode: Microcode Update Driver: v2.2.
[    1.376623] sched_clock: Marking stable (1376497941, 0)->(1461304716, -84806775)
[    1.376815] registered taskstats version 1
[    1.376825] Loading compiled-in X.509 certificates
[    1.378896] Loaded X.509 cert 'Build time autogenerated kernel key: fec222083a1a40f2051f2b073ec28e5cb659a232'
[    1.378910] zswap: loaded using pool lzo/zbud
[    1.381815] Key type big_key registered
[    1.381817] Key type trusted registered
[    1.383262] Key type encrypted registered
[    1.383263] AppArmor: AppArmor sha1 policy hashing enabled
[    1.383265] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.383278] evm: HMAC attrs: 0x1
[    1.383470]   Magic number: 11:582:148
[    1.383506] acpi device:19: hash matches
[    1.383535] hctosys: unable to open rtc device (rtc0)
[    1.383595] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.383596] EDD information not available.
[    1.383626] PM: Hibernation image not present or could not be loaded.
[    1.385370] Freeing unused kernel memory: 2368K
[    1.386586] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.420068] Write protecting the kernel read-only data: 18432k
[    1.420657] Freeing unused kernel memory: 2024K
[    1.420891] Freeing unused kernel memory: 84K
[    1.422607] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.422607] x86/mm: Checking user space page tables
[    1.423970] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.467172] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    1.468526] acpi device:3b: registered as cooling_device9
[    1.468666] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:38/LNXVIDEO:00/input/input5
[    1.482784] ahci 0000:00:1f.2: version 3.0
[    1.482949] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.490789] alx 0000:07:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [00:8c:fa:29:8c:23]
[    1.493057] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x39 impl SATA mode
[    1.493060] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst 
[    1.500668] alx 0000:07:00.0 enp7s0: renamed from eth0
[    1.528661] scsi host0: ahci
[    1.528813] scsi host1: ahci
[    1.528967] scsi host2: ahci
[    1.529071] scsi host3: ahci
[    1.529215] scsi host4: ahci
[    1.529288] scsi host5: ahci
[    1.529314] ata1: SATA max UDMA/133 abar m2048@0xc1217000 port 0xc1217100 irq 25
[    1.529315] ata2: DUMMY
[    1.529315] ata3: DUMMY
[    1.529317] ata4: SATA max UDMA/133 abar m2048@0xc1217000 port 0xc1217280 irq 25
[    1.529319] ata5: SATA max UDMA/133 abar m2048@0xc1217000 port 0xc1217300 irq 25
[    1.529320] ata6: SATA max UDMA/133 abar m2048@0xc1217000 port 0xc1217380 irq 25
[    1.534836] [drm] radeon kernel modesetting enabled.
[    1.536587] AMD IOMMUv2 driver by Joerg Roedel <jroedel@xxxxxxx>
[    1.536587] AMD IOMMUv2 functionality not available on this system
[    1.539114] CRAT table not found
[    1.539114] Finished initializing topology ret=0
[    1.539129] kfd kfd: Initialized module
[    1.539251] checking generic (b0000000 300000) vs hw (b0000000 10000000)
[    1.539252] fb: switching to radeondrmfb from VESA VGA
[    1.539271] Console: switching to colour dummy device 80x25
[    1.539487] [drm] initializing kernel modesetting (TURKS 0x1002:0x6840 0x1179:0xFB22 0x00).
[    1.539542] ATOM BIOS: Toshiba/IEC
[    1.539632] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[    1.539633] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[    1.539636] [drm] Detected VRAM RAM=2048M, BAR=256M
[    1.539636] [drm] RAM width 128bits DDR
[    1.539676] [TTM] Zone  kernel: Available graphics memory: 8190094 kiB
[    1.539677] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    1.539677] [TTM] Initializing pool allocator
[    1.539680] [TTM] Initializing DMA pool allocator
[    1.539695] [drm] radeon: 2048M of VRAM memory ready
[    1.539696] [drm] radeon: 1024M of GTT memory ready.
[    1.539702] [drm] Loading TURKS Microcode
[    1.539758] [drm] Internal thermal controller with fan control
[    1.541679] [drm] radeon: dpm initialized
[    1.541726] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    1.542093] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    1.551899] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[    1.551996] radeon 0000:01:00.0: WB enabled
[    1.551998] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff8812b0e8ac00
[    1.552007] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff8812b0e8ac0c
[    1.552422] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffb05602832118
[    1.552423] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.552424] [drm] Driver supports precise vblank timestamp query.
[    1.552425] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    1.552457] radeon 0000:01:00.0: radeon: using MSI.
[    1.552479] [drm] radeon: irq initialized.
[    1.568785] [drm] ring test on 0 succeeded in 1 usecs
[    1.568792] [drm] ring test on 3 succeeded in 4 usecs
[    1.676007] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.692006] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.744715] [drm] ring test on 5 succeeded in 2 usecs
[    1.744720] [drm] UVD initialized successfully.
[    1.744926] [drm] ib test on ring 0 succeeded in 0 usecs
[    1.744979] [drm] ib test on ring 3 succeeded in 0 usecs
[    1.842322] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.842460] ata1.00: supports DRM functions and may not be fully accessible
[    1.842835] ata1.00: disabling queued TRIM support
[    1.842837] ata1.00: ATA-9: Samsung SSD 840 EVO 500GB, EXT0DB6Q, max UDMA/133
[    1.842838] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.843358] ata1.00: supports DRM functions and may not be fully accessible
[    1.843727] ata1.00: disabling queued TRIM support
[    1.844113] ata1.00: configured for UDMA/133
[    1.844323] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 840  DB6Q PQ: 0 ANSI: 5
[    1.895242] [drm] ib test on ring 5 succeeded
[    1.920635] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.920637] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.921044] hub 1-1:1.0: USB hub found
[    1.921129] hub 1-1:1.0: 6 ports detected
[    1.932310] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.932319] sd 0:0:0:0: [sda] Write Protect is off
[    1.932321] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.932334] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.932344] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.933471]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[    1.934282] sd 0:0:0:0: [sda] supports TCG Opal
[    1.934284] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.960108] [drm] radeon atom DIG backlight initialized
[    1.960111] [drm] Radeon Display Connectors
[    1.960113] [drm] Connector 0:
[    1.960113] [drm]   LVDS-1
[    1.960115] [drm]   DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[    1.960115] [drm]   Encoders:
[    1.960116] [drm]     LCD1: INTERNAL_UNIPHY
[    1.960116] [drm] Connector 1:
[    1.960117] [drm]   HDMI-A-1
[    1.960117] [drm]   HPD1
[    1.960118] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    1.960119] [drm]   Encoders:
[    1.960119] [drm]     DFP1: INTERNAL_UNIPHY1
[    1.960120] [drm] Connector 2:
[    1.960120] [drm]   VGA-1
[    1.960121] [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[    1.960122] [drm]   Encoders:
[    1.960122] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    1.980373] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.980374] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.980643] hub 2-1:1.0: USB hub found
[    1.980737] hub 2-1:1.0: 6 ports detected
[    2.053850] [drm] fb mappable at 0xB0363000
[    2.053851] [drm] vram apper at 0xB0000000
[    2.053851] [drm] size 8294400
[    2.053852] [drm] fb depth is 24
[    2.053852] [drm]    pitch is 7680
[    2.054005] fbcon: radeondrmfb (fb0) is primary device
[    2.054080] Console: switching to colour frame buffer device 170x48
[    2.054105] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    2.068313] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[    2.173051] psmouse serio1: synaptics: queried max coordinates: x [..5634], y [..4598]
[    2.208089] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[    2.230119] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400/0x0, board id: 1680, fw id: 706145
[    2.247339] ata4: SATA link down (SStatus 0 SControl 300)
[    2.265403] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    2.316970] usb 1-1.1: New USB device found, idVendor=0bda, idProduct=0129
[    2.316975] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.316978] usb 1-1.1: Product: USB2.0-CRW
[    2.316981] usb 1-1.1: Manufacturer: Generic
[    2.316983] usb 1-1.1: SerialNumber: 20100201396000000
[    2.322709] usbcore: registered new interface driver rtsx_usb
[    2.331998] tsc: Refined TSC clocksource calibration: 2394.557 MHz
[    2.332005] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2284219ce66, max_idle_ns: 440795287462 ns
[    2.396088] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[    2.436140] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[    2.456554] usb 4-2: New USB device found, idVendor=0451, idProduct=8046
[    2.456557] usb 4-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.457037] hub 4-2:1.0: USB hub found
[    2.457555] hub 4-2:1.0: 4 ports detected
[    2.563404] ata5: SATA link down (SStatus 0 SControl 300)
[    2.576048] usb 3-2: new high-speed USB device number 3 using xhci_hcd
[    2.582035] usb 1-1.3: New USB device found, idVendor=10f1, idProduct=1a43
[    2.582038] usb 1-1.3: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    2.582039] usb 1-1.3: Product: TOSHIBA Web Camera - HD
[    2.582040] usb 1-1.3: Manufacturer: Importek
[    2.716646] usb 3-2: New USB device found, idVendor=0451, idProduct=8044
[    2.716649] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    2.716650] usb 3-2: SerialNumber: 35030861EF9B
[    2.716939] hub 3-2:1.0: USB hub found
[    2.716965] hub 3-2:1.0: 4 ports detected
[    2.836161] usb 4-1: new SuperSpeed USB device number 3 using xhci_hcd
[    2.856914] usb 4-1: New USB device found, idVendor=0bc2, idProduct=ab2e
[    2.856918] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.856921] usb 4-1: Product: Ultra Slim PL
[    2.856923] usb 4-1: Manufacturer: Seagate
[    2.856926] usb 4-1: SerialNumber: NA9G2ARN
[    2.860011] usbcore: registered new interface driver usb-storage
[    2.861886] scsi host6: uas
[    2.861935] usbcore: registered new interface driver uas
[    2.862297] scsi 6:0:0:0: Direct-Access     Seagate  Ultra Slim PL    0109 PQ: 0 ANSI: 6
[    2.878297] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.881918] ata6.00: ATAPI: TSSTcorp CDDVDW SN-208FB, SB00, max UDMA/100
[    2.884607] ata6.00: configured for UDMA/100
[    2.887273] scsi: waiting for bus probes to complete ...
[    2.896514] sd 6:0:0:0: Attached scsi generic sg1 type 0
[    2.897149] sd 6:0:0:0: [sdb] 3907029167 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    2.897165] sd 6:0:0:0: [sdb] 4096-byte physical blocks
[    2.897341] sd 6:0:0:0: [sdb] Write Protect is off
[    2.897346] sd 6:0:0:0: [sdb] Mode Sense: 53 00 00 08
[    2.897649] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    2.899306] scsi 5:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-208FB  SB00 PQ: 0 ANSI: 5
[    2.900976]  sdb: sdb1
[    2.902312] sd 6:0:0:0: [sdb] Attached SCSI disk
[    2.934688] sr 5:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.934691] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.934872] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    2.934953] sr 5:0:0:0: Attached scsi generic sg2 type 5
[    2.976033] usb 3-3: new full-speed USB device number 4 using xhci_hcd
[    3.118208] usb 3-3: New USB device found, idVendor=046d, idProduct=c534
[    3.118210] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.118211] usb 3-3: Product: USB Receiver
[    3.118212] usb 3-3: Manufacturer: Logitech
[    3.196013] usb 3-2.2: new full-speed USB device number 5 using xhci_hcd
[    3.262810] hidraw: raw HID events driver (C) Jiri Kosina
[    3.266812] usbcore: registered new interface driver usbhid
[    3.266813] usbhid: USB HID core driver
[    3.268216] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:046D:C534.0001/input/input7
[    3.328197] hid-generic 0003:046D:C534.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-3/input0
[    3.328379] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:046D:C534.0002/input/input8
[    3.356376] clocksource: Switched to clocksource tsc
[    3.388415] hid-generic 0003:046D:C534.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-3/input1
[    3.484115] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[    3.536186] usb 3-2.2: New USB device found, idVendor=413c, idProduct=a503
[    3.536188] usb 3-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.536190] usb 3-2.2: Product: Dell AC511 USB SoundBar
[    3.536191] usb 3-2.2: Manufacturer: Dell
[    3.546728] input: Dell Dell AC511 USB SoundBar as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2.2/3-2.2:1.3/0003:413C:A503.0003/input/input9
[    3.565410] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    3.588272] systemd[1]: Detected architecture x86-64.
[    3.588413] systemd[1]: Set hostname to <harutyun-pc>.
[    3.608084] hid-generic 0003:413C:A503.0003: input,hidraw2: USB HID v1.00 Device [Dell Dell AC511 USB SoundBar] on usb-0000:00:14.0-2.2/input3
[    3.655117] systemd[1]: Reached target Encrypted Volumes.
[    3.655258] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.655268] systemd[1]: Reached target Remote File Systems (Pre).
[    3.655302] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[    3.655353] systemd[1]: Listening on Journal Audit Socket.
[    3.655361] systemd[1]: Reached target User and Group Name Lookups.
[    3.655392] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    3.671054] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro
[    3.687959] lp: driver loaded but no devices found
[    3.691799] ppdev: user-space parallel port driver
[    3.700648] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.712566] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[    3.728788] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    3.736533] systemd-journald[320]: Received request to flush runtime journal from PID 1
[    3.902608] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170531/utaddress-247)
[    3.902615] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.902618] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247)
[    3.902622] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.902623] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247)
[    3.902626] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.902627] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170531/utaddress-247)
[    3.902630] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.902631] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    3.902633] lpc_ich 0000:00:1f.0: No MFD cells added
[    3.903351] toshiba_bluetooth: Toshiba ACPI Bluetooth device driver
[    3.906489] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.955679] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    3.955680] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    3.955681] RAPL PMU: hw unit of domain package 2^-16 Joules
[    3.955682] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    3.990275] AVX version of gcm_enc/dec engaged.
[    3.990276] AES CTR mode by8 optimization enabled
[    4.015044] media: Linux media interface: v0.10
[    4.025024] ath: phy0: ASPM enabled: 0x42
[    4.025026] ath: EEPROM regdomain: 0x65
[    4.025027] ath: EEPROM indicates we should expect a direct regpair map
[    4.025029] ath: Country alpha2 being used: 00
[    4.025029] ath: Regpair used: 0x65
[    4.027375] Linux video capture interface: v2.00
[    4.027738] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    4.031789] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    4.035462] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffb05603280000, irq=17
[    4.036377] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input10
[    4.043123] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    4.043125] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.043126] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    4.043127] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    4.043128] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    4.043130] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    4.043131] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    4.053079] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    4.053143] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    4.063608] usbcore: registered new interface driver snd-usb-audio
[    4.105636] intel_rapl: Found RAPL domain package
[    4.105637] intel_rapl: Found RAPL domain core
[    4.105641] intel_rapl: RAPL package 0 domain package locked by BIOS
[    4.114221] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - HD (10f1:1a43)
[    4.114877] ath9k 0000:08:00.0 wlp8s0: renamed from wlan0
[    4.132525] uvcvideo 1-1.3:1.0: Entity type for entity Extension 3 was not initialized!
[    4.132527] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not initialized!
[    4.132529] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized!
[    4.132605] input: TOSHIBA Web Camera - HD: TOSHIB as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input13
[    4.132664] usbcore: registered new interface driver uvcvideo
[    4.132665] USB Video Class driver (1.1.1)
[    4.458300] random: crng init done
[    4.709474] Adding 7999484k swap on /dev/sda6.  Priority:-1 extents:1 across:7999484k SSFS
[    4.756213] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    4.767006] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    4.985311] audit: type=1400 audit(1552774073.985:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=1114 comm="apparmor_parser"
[    4.986629] audit: type=1400 audit(1552774073.986:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ipsec/charon" pid=1116 comm="apparmor_parser"
[    4.986714] audit: type=1400 audit(1552774073.986:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/ipsec/stroke" pid=1118 comm="apparmor_parser"
[    4.987498] audit: type=1400 audit(1552774073.987:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1110 comm="apparmor_parser"
[    4.987500] audit: type=1400 audit(1552774073.987:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=1110 comm="apparmor_parser"
[    4.989342] audit: type=1400 audit(1552774073.989:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1121 comm="apparmor_parser"
[    4.990065] audit: type=1400 audit(1552774073.990:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1111 comm="apparmor_parser"
[    4.990068] audit: type=1400 audit(1552774073.990:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1111 comm="apparmor_parser"
[    4.990070] audit: type=1400 audit(1552774073.990:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1111 comm="apparmor_parser"
[    5.550865] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[    5.566251] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[    5.570257] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
[    5.570723] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
[    5.571585] alx 0000:07:00.0 enp7s0: NIC Up: 1 Gbps Full
[    5.571808] IPv6: ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready
[    5.692699] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
[    6.172013] usb 1-1.2: new full-speed USB device number 5 using ehci-pci
[    6.282097] usb 1-1.2: New USB device found, idVendor=0930, idProduct=0219
[    6.282099] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.282100] usb 1-1.2: Product: Bluetooth USB Host Controller
[    6.282101] usb 1-1.2: Manufacturer: Atheros Communications
[    6.282102] usb 1-1.2: SerialNumber: Alaska Day 2006
[    6.308931] Bluetooth: Core ver 2.22
[    6.308961] NET: Registered protocol family 31
[    6.308962] Bluetooth: HCI device and connection manager initialized
[    6.308965] Bluetooth: HCI socket layer initialized
[    6.308967] Bluetooth: L2CAP socket layer initialized
[    6.308971] Bluetooth: SCO socket layer initialized
[    6.322208] usbcore: registered new interface driver btusb
[    6.326230] usbcore: registered new interface driver ath3k
[    6.351235] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.351237] Bluetooth: BNEP filters: protocol multicast
[    6.351240] Bluetooth: BNEP socket layer initialized
[    6.570313] Bluetooth: RFCOMM TTY layer initialized
[    6.570318] Bluetooth: RFCOMM socket layer initialized
[    6.570323] Bluetooth: RFCOMM ver 1.11
[   11.035214] vmmon: loading out-of-tree module taints kernel.
[   11.035288] vmmon: module verification failed: signature and/or required key missing - tainting kernel
[   11.035742] /dev/vmmon[2177]: Module vmmon: registered with major=10 minor=165
[   11.035745] /dev/vmmon[2177]: Using tsc_khz as TSC frequency: 2394557
[   11.035746] /dev/vmmon[2177]: Module vmmon: initialized
[   11.050924] NET: Registered protocol family 15
[   11.061418] vboxdrv: Found 8 processor cores
[   11.067215] Guest personality initialized and is inactive
[   11.067253] VMCI host device registered (name=vmci, major=10, minor=53)
[   11.067254] Initialized host personality
[   11.080188] vboxdrv: TSC mode is Invariant, tentative frequency 2394556103 Hz
[   11.080189] vboxdrv: Successfully loaded version 5.1.38_Ubuntu (interface 0x002a0000)
[   11.081254] Initializing XFRM netlink socket
[   11.088517] VBoxNetFlt: Successfully started.
[   11.094821] VBoxNetAdp: Successfully started.
[   11.094970] NET: Registered protocol family 40
[   11.103709] VBoxPciLinuxInit
[   11.106544] vboxpci: IOMMU not found (not registered)
[   12.211744] kauditd_printk_skb: 35 callbacks suppressed
[   12.211754] audit: type=1400 audit(1552774081.211:46): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=2464 comm="apparmor_parser"
[   12.264662] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   12.265958] Bridge firewalling registered
[   12.295784] userif-3: sent link down event.
[   12.295787] userif-3: sent link up event.
[   12.313243] Netfilter messages via NETLINK v0.30.
[   12.315564] ctnetlink v0.93: registering with nfnetlink.
[   12.356838] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[   12.520210] userif-3: sent link down event.
[   12.520212] userif-3: sent link up event.
[   13.824324] wlp8s0: authenticate with b4:fb:e4:47:e4:ce
[   13.845370] wlp8s0: send auth to b4:fb:e4:47:e4:ce (try 1/3)
[   13.856800] wlp8s0: authenticated
[   13.859996] wlp8s0: associate with b4:fb:e4:47:e4:ce (try 1/3)
[   13.864607] wlp8s0: RX AssocResp from b4:fb:e4:47:e4:ce (capab=0x431 status=0 aid=2)
[   13.864725] wlp8s0: associated
[   13.864734] IPv6: ADDRCONF(NETDEV_CHANGE): wlp8s0: link becomes ready
[   13.867048] ath: EEPROM regdomain: 0x8348
[   13.867049] ath: EEPROM indicates we should expect a country code
[   13.867049] ath: doing EEPROM country->regdmn map search
[   13.867050] ath: country maps to regdmn code: 0x3a
[   13.867051] ath: Country alpha2 being used: US
[   13.867051] ath: Regpair used: 0x3a
[   13.867052] ath: regdomain 0x8348 dynamically updated by country IE
[   14.083553] userif-3: sent link down event.
[   14.083556] userif-3: sent link up event.
[   21.320998] [UFW BLOCK] IN=wlp8s0 OUT= MAC=01:00:5e:00:00:01:b6:fb:e4:46:e4:ce:08:00 SRC=192.168.169.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=5185 PROTO=2 

[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux