[PATCH 0/4] Add USB-HOST support to cat874

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



While trying to add USB-HOST support to the cat874 board,
it came up that of_usb_get_dr_mode_by_phy was selecting
the wrong DT node to use for dr_mode.
Also, drivers/phy/renesas/phy-rcar-gen3-usb2.c was registering
IRQs, no matter the dr_mode.

This series adds all that is required to add USB-HOST support
to the cat874 board, and also removes the hsusb from Draak's DT
as not necessary anymore.

Thanks,
Fab

Fabrizio Castro (4):
  usb: common: Consider only available nodes for dr_mode
  phy: renesas: rcar-gen3-usb2: No need to request IRQ for non-OTG
  arm64: dts: renesas: r8a774c0-cat874: Add USB-HOST support
  arm64: dts: renesas: r8a77995: draak: Remove hsusb node

 arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts | 15 ++++++++++++++
 arch/arm64/boot/dts/renesas/r8a77995-draak.dts  |  5 -----
 drivers/phy/renesas/phy-rcar-gen3-usb2.c        | 26 ++++++++++++-------------
 drivers/usb/common/common.c                     |  2 ++
 4 files changed, 30 insertions(+), 18 deletions(-)

-- 
2.7.4




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux