Adding Bjørn.
On Wed, Feb 27, 2019 at 11:57:16AM +0000, Måns Rullgård wrote:
> Johan Hovold <johan@xxxxxxxxxx> writes:
>
> > On Tue, Feb 26, 2019 at 05:07:10PM +0000, Mans Rullgard wrote:
> >> The SIMCom SIM5218 and compatible devices have 5 USB interfaces, only 4
> >> of which are serial ports. The fifth is a network interface supported
> >> by the qmi-wwan driver. Furthermore, the serial ports do not support
> >> modem control signals. Add driver_info flags to reflect this.
> >>
> >> Signed-off-by: Mans Rullgard <mans@xxxxxxxxx>
> >> ---
> >> drivers/usb/serial/option.c | 3 ++-
> >> 1 file changed, 2 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
> >> index fb544340888b..af4cbfecc3ff 100644
> >> --- a/drivers/usb/serial/option.c
> >> +++ b/drivers/usb/serial/option.c
> >> @@ -1066,7 +1066,8 @@ static const struct usb_device_id option_ids[] = {
> >> .driver_info = RSVD(3) },
> >> { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
> >> { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */
> >> - { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
> >> + { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000), /* SIMCom SIM5218 */
> >> + .driver_info = NCTRL(0) | NCTRL(1) | NCTRL(2) | NCTRL(3) | RSVD(4) },
> >> /* Quectel products using Qualcomm vendor ID */
> >> { USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC15)},
> >> { USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC20),
> >
> > Could you please provide the output of usb-devices (or lsusb -v) for
> > this device?
>
> lsusb -v:
> Bus 001 Device 003: ID 05c6:9000 Qualcomm, Inc. SIMCom SIM5218 modem
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 0
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x05c6 Qualcomm, Inc.
> idProduct 0x9000 SIMCom SIM5218 modem
> bcdDevice 0.00
> iManufacturer 3 SimTech, Incorporated
> iProduct 2 SimTech SIM5360
> iSerial 0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 138
> bNumInterfaces 5
> bConfigurationValue 1
> iConfiguration 1 SimTech Configuration
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 500mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 255 Vendor Specific Subclass
> bInterfaceProtocol 255 Vendor Specific Protocol
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 32
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x01 EP 1 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 32
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 1
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 255 Vendor Specific Subclass
> bInterfaceProtocol 255 Vendor Specific Protocol
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x82 EP 2 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 32
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 EP 2 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 32
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 2
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 255 Vendor Specific Subclass
> bInterfaceProtocol 255 Vendor Specific Protocol
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x83 EP 3 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 32
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x03 EP 3 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 32
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 3
> bAlternateSetting 0
> bNumEndpoints 3
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 255 Vendor Specific Subclass
> bInterfaceProtocol 255 Vendor Specific Protocol
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x84 EP 4 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0040 1x 64 bytes
> bInterval 5
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x85 EP 5 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 32
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x04 EP 4 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 32
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 4
> bAlternateSetting 0
> bNumEndpoints 3
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 255 Vendor Specific Subclass
> bInterfaceProtocol 255 Vendor Specific Protocol
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x86 EP 6 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0040 1x 64 bytes
> bInterval 5
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x87 EP 7 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 32
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x05 EP 5 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 32
> Device Qualifier (for other device speed):
> bLength 10
> bDescriptorType 6
> bcdUSB 2.00
> bDeviceClass 0
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> bNumConfigurations 1
> can't get debug descriptor: Resource temporarily unavailable
> Device Status: 0x0000
> (Bus Powered)
So the patch looks fine to me. The fifth interface is QMI, but hasn't
been available for use until now then, and this seems to have been the
vendors idea from the start:
http://www.microchip.ua/simcom/WCDMA/APPNOTES/SIMCom_3G_Linux_driver_Application%20Note_V1.00.pdf
And you're seeing errors when opening ports 0-3 due to the DTR calls
which I guess no one noticed or cared about before?
Before you sent me the lsusb I searched for it and came across the below
thread where Bjørn's having a go at SIMCom. In it there's output from a
second device using the same id but with entirely different descriptors.
https://forum.openwrt.org/t/lte-wireless-module-support-by-openwrt-led-on-tplink/13586?page=3
If this is a common theme with this vendor we may need to be extra
careful when making changes.
Johan
