[PATCH 1/3] usb: gadget: atmel_usba_udc: simplify setting of interrupt-enabled mask

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch adds set and clear functions for enabling/disabling
interrupts.  This simplifies the implementation a bit as the masking of
previously set bits doesn't need to be so explicit.

Signed-off-by: Jonas Bonn <jonas@xxxxxxxxxxx>
CC: Cristian Birsan <cristian.birsan@xxxxxxxxxxxxx>
CC: Felipe Balbi <balbi@xxxxxxxxxx>
CC: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
CC: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
CC: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
CC: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
CC: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
CC: linux-usb@xxxxxxxxxxxxxxx
---
 drivers/usb/gadget/udc/atmel_usba_udc.c | 29 ++++++++++++++++---------
 1 file changed, 19 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 51a2b9232baa..9d18fdddd9b2 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -358,8 +358,20 @@ static inline u32 usba_int_enb_get(struct usba_udc *udc)
 	return udc->int_enb_cache;
 }
 
-static inline void usba_int_enb_set(struct usba_udc *udc, u32 val)
+static inline void usba_int_enb_set(struct usba_udc *udc, u32 mask)
 {
+	u32 val;
+
+	val = udc->int_enb_cache | mask;
+	usba_writel(udc, INT_ENB, val);
+	udc->int_enb_cache = val;
+}
+
+static inline void usba_int_enb_clear(struct usba_udc *udc, u32 mask)
+{
+	u32 val;
+
+	val = udc->int_enb_cache & ~mask;
 	usba_writel(udc, INT_ENB, val);
 	udc->int_enb_cache = val;
 }
@@ -629,14 +641,12 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 	if (ep->can_dma) {
 		u32 ctrl;
 
-		usba_int_enb_set(udc, usba_int_enb_get(udc) |
-				      USBA_BF(EPT_INT, 1 << ep->index) |
+		usba_int_enb_set(udc, USBA_BF(EPT_INT, 1 << ep->index) |
 				      USBA_BF(DMA_INT, 1 << ep->index));
 		ctrl = USBA_AUTO_VALID | USBA_INTDIS_DMA;
 		usba_ep_writel(ep, CTL_ENB, ctrl);
 	} else {
-		usba_int_enb_set(udc, usba_int_enb_get(udc) |
-				      USBA_BF(EPT_INT, 1 << ep->index));
+		usba_int_enb_set(udc, USBA_BF(EPT_INT, 1 << ep->index));
 	}
 
 	spin_unlock_irqrestore(&udc->lock, flags);
@@ -680,8 +690,7 @@ static int usba_ep_disable(struct usb_ep *_ep)
 		usba_dma_readl(ep, STATUS);
 	}
 	usba_ep_writel(ep, CTL_DIS, USBA_EPT_ENABLE);
-	usba_int_enb_set(udc, usba_int_enb_get(udc) &
-			      ~USBA_BF(EPT_INT, 1 << ep->index));
+	usba_int_enb_clear(udc, USBA_BF(EPT_INT, 1 << ep->index));
 
 	request_complete_list(ep, &req_list, -ESHUTDOWN);
 
@@ -1713,7 +1722,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
 	if (status & USBA_DET_SUSPEND) {
 		toggle_bias(udc, 0);
 		usba_writel(udc, INT_CLR, USBA_DET_SUSPEND);
-		usba_int_enb_set(udc, int_enb | USBA_WAKE_UP);
+		usba_int_enb_set(udc, USBA_WAKE_UP);
 		udc->bias_pulse_needed = true;
 		DBG(DBG_BUS, "Suspend detected\n");
 		if (udc->gadget.speed != USB_SPEED_UNKNOWN
@@ -1727,7 +1736,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
 	if (status & USBA_WAKE_UP) {
 		toggle_bias(udc, 1);
 		usba_writel(udc, INT_CLR, USBA_WAKE_UP);
-		usba_int_enb_set(udc, int_enb & ~USBA_WAKE_UP);
+		usba_int_enb_clear(udc, USBA_WAKE_UP);
 		DBG(DBG_BUS, "Wake Up CPU detected\n");
 	}
 
@@ -1796,7 +1805,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
 				| USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE)));
 		usba_ep_writel(ep0, CTL_ENB,
 				USBA_EPT_ENABLE | USBA_RX_SETUP);
-		usba_int_enb_set(udc, int_enb | USBA_BF(EPT_INT, 1) |
+		usba_int_enb_set(udc, USBA_BF(EPT_INT, 1) |
 				      USBA_DET_SUSPEND | USBA_END_OF_RESUME);
 
 		/*
-- 
2.19.1




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux