Use codespell to fix lots of typos over frontends.
Manually verified to avoid false-positives.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
---
drivers/media/usb/au0828/au0828-core.c | 2 +-
drivers/media/usb/au0828/au0828.h | 2 +-
drivers/media/usb/cx231xx/cx231xx-avcore.c | 2 +-
drivers/media/usb/cx231xx/cx231xx-pcb-cfg.h | 2 +-
drivers/media/usb/cx231xx/cx231xx.h | 2 +-
drivers/media/usb/dvb-usb-v2/dvb_usb.h | 2 +-
drivers/media/usb/dvb-usb-v2/lmedm04.c | 8 ++++----
drivers/media/usb/dvb-usb-v2/mxl111sf.c | 4 ++--
drivers/media/usb/dvb-usb/af9005.c | 2 +-
drivers/media/usb/dvb-usb/cinergyT2-fe.c | 2 +-
drivers/media/usb/dvb-usb/cxusb.c | 2 +-
drivers/media/usb/dvb-usb/dvb-usb-init.c | 2 +-
drivers/media/usb/dvb-usb/dvb-usb.h | 2 +-
drivers/media/usb/dvb-usb/pctv452e.c | 4 ++--
drivers/media/usb/em28xx/em28xx-i2c.c | 4 ++--
drivers/media/usb/em28xx/em28xx-reg.h | 2 +-
drivers/media/usb/gspca/Kconfig | 2 +-
drivers/media/usb/gspca/autogain_functions.c | 2 +-
drivers/media/usb/gspca/benq.c | 4 ++--
drivers/media/usb/gspca/mr97310a.c | 10 +++++-----
drivers/media/usb/gspca/ov519.c | 4 ++--
drivers/media/usb/gspca/pac_common.h | 2 +-
drivers/media/usb/gspca/sn9c20x.c | 2 +-
drivers/media/usb/gspca/sonixb.c | 4 ++--
drivers/media/usb/gspca/sonixj.c | 2 +-
drivers/media/usb/gspca/spca501.c | 2 +-
drivers/media/usb/gspca/sq905.c | 2 +-
drivers/media/usb/gspca/sunplus.c | 4 ++--
drivers/media/usb/gspca/t613.c | 2 +-
drivers/media/usb/gspca/touptek.c | 4 ++--
drivers/media/usb/gspca/w996Xcf.c | 2 +-
drivers/media/usb/gspca/zc3xx-reg.h | 2 +-
drivers/media/usb/gspca/zc3xx.c | 8 ++++----
drivers/media/usb/hdpvr/hdpvr.h | 2 +-
drivers/media/usb/pwc/pwc-dec23.c | 4 ++--
drivers/media/usb/pwc/pwc-if.c | 2 +-
drivers/media/usb/pwc/pwc-misc.c | 2 +-
drivers/media/usb/siano/smsusb.c | 2 +-
drivers/media/usb/stk1160/stk1160-core.c | 4 ++--
drivers/media/usb/stk1160/stk1160-reg.h | 4 ++--
drivers/media/usb/stkwebcam/stk-webcam.c | 2 +-
drivers/media/usb/tm6000/tm6000-alsa.c | 2 +-
drivers/media/usb/tm6000/tm6000-core.c | 4 ++--
drivers/media/usb/tm6000/tm6000-dvb.c | 2 +-
drivers/media/usb/tm6000/tm6000-i2c.c | 2 +-
drivers/media/usb/tm6000/tm6000-stds.c | 2 +-
drivers/media/usb/tm6000/tm6000-video.c | 2 +-
drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c | 2 +-
drivers/media/usb/ttusb-dec/ttusb_dec.c | 2 +-
drivers/media/usb/usbvision/usbvision-core.c | 8 ++++----
drivers/media/usb/usbvision/usbvision.h | 8 ++++----
drivers/media/usb/uvc/uvc_video.c | 2 +-
drivers/media/usb/zr364xx/zr364xx.c | 2 +-
53 files changed, 81 insertions(+), 81 deletions(-)
diff --git a/drivers/media/usb/au0828/au0828-core.c b/drivers/media/usb/au0828/au0828-core.c
index 1fdb1601dc65..3f8c92a70116 100644
--- a/drivers/media/usb/au0828/au0828-core.c
+++ b/drivers/media/usb/au0828/au0828-core.c
@@ -234,7 +234,7 @@ static void au0828_media_graph_notify(struct media_entity *new,
if (!new) {
/*
* Called during au0828 probe time to connect
- * entites that were created prior to registering
+ * entities that were created prior to registering
* the notify handler. Find mixer and decoder.
*/
media_device_for_each_entity(entity, dev->media_dev) {
diff --git a/drivers/media/usb/au0828/au0828.h b/drivers/media/usb/au0828/au0828.h
index 004eadef55c7..425c35d16057 100644
--- a/drivers/media/usb/au0828/au0828.h
+++ b/drivers/media/usb/au0828/au0828.h
@@ -52,7 +52,7 @@
#define AU0828_INTERLACED_DEFAULT 1
-/* Defination for AU0828 USB transfer */
+/* Definition for AU0828 USB transfer */
#define AU0828_MAX_ISO_BUFS 12 /* maybe resize this value in the future */
#define AU0828_ISO_PACKETS_PER_URB 128
diff --git a/drivers/media/usb/cx231xx/cx231xx-avcore.c b/drivers/media/usb/cx231xx/cx231xx-avcore.c
index fdd3c221fa0d..3374888b3021 100644
--- a/drivers/media/usb/cx231xx/cx231xx-avcore.c
+++ b/drivers/media/usb/cx231xx/cx231xx-avcore.c
@@ -2987,7 +2987,7 @@ int cx231xx_gpio_i2c_write_ack(struct cx231xx *dev)
{
int status = 0;
- /* set SDA to ouput */
+ /* set SDA to output */
dev->gpio_dir |= 1 << dev->board.tuner_sda_gpio;
status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, dev->gpio_val);
diff --git a/drivers/media/usb/cx231xx/cx231xx-pcb-cfg.h b/drivers/media/usb/cx231xx/cx231xx-pcb-cfg.h
index 8f00b1d38277..bb4f817be0c5 100644
--- a/drivers/media/usb/cx231xx/cx231xx-pcb-cfg.h
+++ b/drivers/media/usb/cx231xx/cx231xx-pcb-cfg.h
@@ -86,7 +86,7 @@ enum TS_PORT{
#define EAVP_MASK 0x8
enum EAV_PRESENT{
NO_EXTERNAL_AV = 0x0, /* 0: No External A/V inputs
- (no need for i2s blcok),
+ (no need for i2s block),
Analog Tuner must be present */
EXTERNAL_AV = 0x8 /* 1: External A/V inputs
present (requires i2s blk) */
diff --git a/drivers/media/usb/cx231xx/cx231xx.h b/drivers/media/usb/cx231xx/cx231xx.h
index fa640bf20111..86b7f57492b1 100644
--- a/drivers/media/usb/cx231xx/cx231xx.h
+++ b/drivers/media/usb/cx231xx/cx231xx.h
@@ -646,7 +646,7 @@ struct cx231xx {
/* frame properties */
int width; /* current frame width */
int height; /* current frame height */
- int interlaced; /* 1=interlace fileds, 0=just top fileds */
+ int interlaced; /* 1=interlace fields, 0=just top fields */
struct cx231xx_audio adev;
diff --git a/drivers/media/usb/dvb-usb-v2/dvb_usb.h b/drivers/media/usb/dvb-usb-v2/dvb_usb.h
index 3fd6cc0d6340..728ef5f3ada2 100644
--- a/drivers/media/usb/dvb-usb-v2/dvb_usb.h
+++ b/drivers/media/usb/dvb-usb-v2/dvb_usb.h
@@ -146,7 +146,7 @@ struct dvb_usb_rc {
};
/**
- * usb streaming configration for adapter
+ * usb streaming configuration for adapter
* @type: urb type
* @count: count of used urbs
* @endpoint: stream usb endpoint number
diff --git a/drivers/media/usb/dvb-usb-v2/lmedm04.c b/drivers/media/usb/dvb-usb-v2/lmedm04.c
index 602013cf3e69..15944b95970f 100644
--- a/drivers/media/usb/dvb-usb-v2/lmedm04.c
+++ b/drivers/media/usb/dvb-usb-v2/lmedm04.c
@@ -308,7 +308,7 @@ static void lme2510_int_response(struct urb *lme_urb)
switch (ibuf[0]) {
case 0xaa:
- debug_data_snipet(1, "INT Remote data snipet", ibuf);
+ debug_data_snipet(1, "INT Remote data snippet", ibuf);
if (!adap_to_d(adap)->rc_dev)
break;
@@ -358,13 +358,13 @@ static void lme2510_int_response(struct urb *lme_urb)
lme2510_update_stats(adap);
- debug_data_snipet(5, "INT Remote data snipet in", ibuf);
+ debug_data_snipet(5, "INT Remote data snippet in", ibuf);
break;
case 0xcc:
- debug_data_snipet(1, "INT Control data snipet", ibuf);
+ debug_data_snipet(1, "INT Control data snippet", ibuf);
break;
default:
- debug_data_snipet(1, "INT Unknown data snipet", ibuf);
+ debug_data_snipet(1, "INT Unknown data snippet", ibuf);
break;
}
}
diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf.c b/drivers/media/usb/dvb-usb-v2/mxl111sf.c
index 85cdf593a9ad..5e2d53af68c7 100644
--- a/drivers/media/usb/dvb-usb-v2/mxl111sf.c
+++ b/drivers/media/usb/dvb-usb-v2/mxl111sf.c
@@ -140,7 +140,7 @@ int mxl111sf_write_reg_mask(struct mxl111sf_state *state,
if (mask != 0xff) {
ret = mxl111sf_read_reg(state, addr, &val);
#if 1
- /* dont know why this usually errors out on the first try */
+ /* don't know why this usually errors out on the first try */
if (mxl_fail(ret))
pr_err("error writing addr: 0x%02x, mask: 0x%02x, data: 0x%02x, retrying...",
addr, mask, data);
@@ -783,7 +783,7 @@ static int mxl111sf_attach_demod(struct dvb_usb_adapter *adap, u8 fe_id)
if (mxl_fail(ret))
goto fail;
- /* dont care if this fails */
+ /* don't care if this fails */
mxl111sf_init_port_expander(state);
adap->fe[fe_id] = dvb_attach(mxl111sf_demod_attach, state,
diff --git a/drivers/media/usb/dvb-usb/af9005.c b/drivers/media/usb/dvb-usb/af9005.c
index 16e946e01d2c..0638d907c73e 100644
--- a/drivers/media/usb/dvb-usb/af9005.c
+++ b/drivers/media/usb/dvb-usb/af9005.c
@@ -845,7 +845,7 @@ static int af9005_rc_query(struct dvb_usb_device *d, u32 * event, int *state)
/* deb_info("rc_query\n"); */
st->data[0] = 3; /* rest of packet length low */
- st->data[1] = 0; /* rest of packet lentgh high */
+ st->data[1] = 0; /* rest of packet length high */
st->data[2] = 0x40; /* read remote */
st->data[3] = 1; /* rest of packet length */
st->data[4] = seq = st->sequence++; /* sequence number */
diff --git a/drivers/media/usb/dvb-usb/cinergyT2-fe.c b/drivers/media/usb/dvb-usb/cinergyT2-fe.c
index df71df7ed524..4c9f83ba260d 100644
--- a/drivers/media/usb/dvb-usb/cinergyT2-fe.c
+++ b/drivers/media/usb/dvb-usb/cinergyT2-fe.c
@@ -33,7 +33,7 @@
* This function is probably reusable and may better get placed in a support
* library.
*
- * We replace errornous fields by default TPS fields (the ones with value 0).
+ * We replace erroneous fields by default TPS fields (the ones with value 0).
*/
static uint16_t compute_tps(struct dtv_frontend_properties *op)
diff --git a/drivers/media/usb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c
index a51a45c60233..9ddb2000249e 100644
--- a/drivers/media/usb/dvb-usb/cxusb.c
+++ b/drivers/media/usb/dvb-usb/cxusb.c
@@ -1016,7 +1016,7 @@ static int cxusb_dualdig4_rev2_tuner_attach(struct dvb_usb_adapter *adap)
/*
* No need to call dvb7000p_attach here, as it was called
* already, as frontend_attach method is called first, and
- * tuner_attach is only called on sucess.
+ * tuner_attach is only called on success.
*/
tun_i2c = st->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe,
DIBX000_I2C_INTERFACE_TUNER, 1);
diff --git a/drivers/media/usb/dvb-usb/dvb-usb-init.c b/drivers/media/usb/dvb-usb/dvb-usb-init.c
index 40ca4eafb137..99951e02a880 100644
--- a/drivers/media/usb/dvb-usb/dvb-usb-init.c
+++ b/drivers/media/usb/dvb-usb/dvb-usb-init.c
@@ -98,7 +98,7 @@ static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs)
/*
* when reloading the driver w/o replugging the device
- * sometimes a timeout occures, this helps
+ * sometimes a timeout occurs, this helps
*/
if (d->props.generic_bulk_ctrl_endpoint != 0) {
usb_clear_halt(d->udev, usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
diff --git a/drivers/media/usb/dvb-usb/dvb-usb.h b/drivers/media/usb/dvb-usb/dvb-usb.h
index 317ed6a82d19..32829bdd5f22 100644
--- a/drivers/media/usb/dvb-usb/dvb-usb.h
+++ b/drivers/media/usb/dvb-usb/dvb-usb.h
@@ -336,7 +336,7 @@ struct usb_data_stream {
* struct dvb_usb_adapter - a DVB adapter on a USB device
* @id: index of this adapter (starting with 0).
*
- * @feedcount: number of reqested feeds (used for streaming-activation)
+ * @feedcount: number of requested feeds (used for streaming-activation)
* @pid_filtering: is hardware pid_filtering used or not.
*
* @pll_addr: I2C address of the tuner for programming
diff --git a/drivers/media/usb/dvb-usb/pctv452e.c b/drivers/media/usb/dvb-usb/pctv452e.c
index 0af74383083d..150081128196 100644
--- a/drivers/media/usb/dvb-usb/pctv452e.c
+++ b/drivers/media/usb/dvb-usb/pctv452e.c
@@ -528,13 +528,13 @@ static int pctv452e_power_ctrl(struct dvb_usb_device *d, int i)
rx = b0 + 5;
- /* hmm where shoud this should go? */
+ /* hmm where should this should go? */
ret = usb_set_interface(d->udev, 0, ISOC_INTERFACE_ALTERNATIVE);
if (ret != 0)
info("%s: Warning set interface returned: %d\n",
__func__, ret);
- /* this is a one-time initialization, dont know where to put */
+ /* this is a one-time initialization, don't know where to put */
b0[0] = 0xaa;
b0[1] = state->c++;
b0[2] = PCTV_CMD_RESET;
diff --git a/drivers/media/usb/em28xx/em28xx-i2c.c b/drivers/media/usb/em28xx/em28xx-i2c.c
index 02c13d71e6c1..a3155ec196cc 100644
--- a/drivers/media/usb/em28xx/em28xx-i2c.c
+++ b/drivers/media/usb/em28xx/em28xx-i2c.c
@@ -296,7 +296,7 @@ static int em28xx_i2c_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf, u16 len)
return ret;
}
/*
- * NOTE: some devices with two i2c busses have the bad habit to return 0
+ * NOTE: some devices with two i2c buses have the bad habit to return 0
* bytes if we are on bus B AND there was no write attempt to the
* specified slave address before AND no device is present at the
* requested slave address.
@@ -427,7 +427,7 @@ static int em25xx_bus_B_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf,
return ret;
}
/*
- * NOTE: some devices with two i2c busses have the bad habit to return 0
+ * NOTE: some devices with two i2c buses have the bad habit to return 0
* bytes if we are on bus B AND there was no write attempt to the
* specified slave address before AND no device is present at the
* requested slave address.
diff --git a/drivers/media/usb/em28xx/em28xx-reg.h b/drivers/media/usb/em28xx/em28xx-reg.h
index f53afe18e92d..d7c60862874a 100644
--- a/drivers/media/usb/em28xx/em28xx-reg.h
+++ b/drivers/media/usb/em28xx/em28xx-reg.h
@@ -67,7 +67,7 @@
#define EM28XX_I2C_CLK_WAIT_ENABLE 0x40
#define EM28XX_I2C_EEPROM_ON_BOARD 0x08
#define EM28XX_I2C_EEPROM_KEY_VALID 0x04
-#define EM2874_I2C_SECONDARY_BUS_SELECT 0x04 /* em2874 has two i2c busses */
+#define EM2874_I2C_SECONDARY_BUS_SELECT 0x04 /* em2874 has two i2c buses */
#define EM28XX_I2C_FREQ_1_5_MHZ 0x03 /* bus frequency (bits [1-0]) */
#define EM28XX_I2C_FREQ_25_KHZ 0x02
#define EM28XX_I2C_FREQ_400_KHZ 0x01
diff --git a/drivers/media/usb/gspca/Kconfig b/drivers/media/usb/gspca/Kconfig
index d3b6665c342d..088566e88467 100644
--- a/drivers/media/usb/gspca/Kconfig
+++ b/drivers/media/usb/gspca/Kconfig
@@ -46,7 +46,7 @@ config USB_GSPCA_CPIA1
depends on VIDEO_V4L2 && USB_GSPCA
help
Say Y here if you want support for USB cameras based on the cpia
- CPiA chip. Note that you need atleast version 0.6.4 of libv4l for
+ CPiA chip. Note that you need at least version 0.6.4 of libv4l for
applications to understand the videoformat generated by this driver.
To compile this driver as a module, choose M here: the
diff --git a/drivers/media/usb/gspca/autogain_functions.c b/drivers/media/usb/gspca/autogain_functions.c
index 6dfab2b077f7..f915cc7c0c63 100644
--- a/drivers/media/usb/gspca/autogain_functions.c
+++ b/drivers/media/usb/gspca/autogain_functions.c
@@ -98,7 +98,7 @@ EXPORT_SYMBOL(gspca_expo_autogain);
80 %) and if that does not help, only then changes exposure. This leads
to a much more stable image then using the knee algorithm which at
certain points of the knee graph will only try to adjust exposure,
- which leads to oscilating as one exposure step is huge.
+ which leads to oscillating as one exposure step is huge.
Returns 0 if no changes were made, 1 if the gain and or exposure settings
where changed. */
diff --git a/drivers/media/usb/gspca/benq.c b/drivers/media/usb/gspca/benq.c
index 8a8db5eb6d5f..1744591b8ba0 100644
--- a/drivers/media/usb/gspca/benq.c
+++ b/drivers/media/usb/gspca/benq.c
@@ -205,12 +205,12 @@ static void sd_isoc_irq(struct urb *urb)
* - 80 ba/bb 00 00 = start of image followed by 'ff d8'
* - 04 ba/bb oo oo = image piece
* where 'oo oo' is the image offset
- (not cheked)
+ (not checked)
* - (other -> bad frame)
* The images are JPEG encoded with full header and
* normal ff escape.
* The end of image ('ff d9') may occur in any URB.
- * (not cheked)
+ * (not checked)
*/
data = (u8 *) urb0->transfer_buffer
+ urb0->iso_frame_desc[i].offset;
diff --git a/drivers/media/usb/gspca/mr97310a.c b/drivers/media/usb/gspca/mr97310a.c
index bea196361215..af454663e295 100644
--- a/drivers/media/usb/gspca/mr97310a.c
+++ b/drivers/media/usb/gspca/mr97310a.c
@@ -520,7 +520,7 @@ static int start_cif_cam(struct gspca_dev *gspca_dev)
switch (gspca_dev->pixfmt.width) {
case 160:
data[9] |= 0x04; /* reg 8, 2:1 scale down from 320 */
- /* fall thru */
+ /* fall through */
case 320:
default:
data[3] = 0x28; /* reg 2, H size/8 */
@@ -530,7 +530,7 @@ static int start_cif_cam(struct gspca_dev *gspca_dev)
break;
case 176:
data[9] |= 0x04; /* reg 8, 2:1 scale down from 352 */
- /* fall thru */
+ /* fall through */
case 352:
data[3] = 0x2c; /* reg 2, H size/8 */
data[4] = 0x48; /* reg 3, V size/4 */
@@ -617,10 +617,10 @@ static int start_vga_cam(struct gspca_dev *gspca_dev)
switch (gspca_dev->pixfmt.width) {
case 160:
data[9] |= 0x0c; /* reg 8, 4:1 scale down */
- /* fall thru */
+ /* fall through */
case 320:
data[9] |= 0x04; /* reg 8, 2:1 scale down */
- /* fall thru */
+ /* fall through */
case 640:
default:
data[3] = 0x50; /* reg 2, H size/8 */
@@ -637,7 +637,7 @@ static int start_vga_cam(struct gspca_dev *gspca_dev)
case 176:
data[9] |= 0x04; /* reg 8, 2:1 scale down */
- /* fall thru */
+ /* fall through */
case 352:
data[3] = 0x2c; /* reg 2, H size */
data[4] = 0x48; /* reg 3, V size */
diff --git a/drivers/media/usb/gspca/ov519.c b/drivers/media/usb/gspca/ov519.c
index 10fcbe9e8614..f2799e8cb8e7 100644
--- a/drivers/media/usb/gspca/ov519.c
+++ b/drivers/media/usb/gspca/ov519.c
@@ -1945,7 +1945,7 @@ static const struct ov_i2c_regvals norm_8610[] = {
{ 0x62, 0x5f }, /* was 0xd7, new from windrv 090403 */
{ 0x63, 0xff },
{ 0x64, 0x53 }, /* new windrv 090403 says 0x57,
- * maybe thats wrong */
+ * maybe that's wrong */
{ 0x65, 0x00 },
{ 0x66, 0x55 },
{ 0x67, 0xb0 },
@@ -3658,7 +3658,7 @@ static void ov518_mode_init_regs(struct sd *sd)
case SEN_OV7620AE:
/*
* HdG: 640x480 needs special handling on device
- * revision 2, we check for device revison > 0 to
+ * revision 2, we check for device revision > 0 to
* avoid regressions, as we don't know the correct
* thing todo for revision 1.
*
diff --git a/drivers/media/usb/gspca/pac_common.h b/drivers/media/usb/gspca/pac_common.h
index 31f2a42af4dd..aae97a5534e3 100644
--- a/drivers/media/usb/gspca/pac_common.h
+++ b/drivers/media/usb/gspca/pac_common.h
@@ -21,7 +21,7 @@
/* We calculate the autogain at the end of the transfer of a frame, at this
moment a frame with the old settings is being captured and transmitted. So
- if we adjust the gain or exposure we must ignore atleast the next frame for
+ if we adjust the gain or exposure we must ignore at least the next frame for
the new settings to come into effect before doing any other adjustments. */
#define PAC_AUTOGAIN_IGNORE_FRAMES 2
diff --git a/drivers/media/usb/gspca/sn9c20x.c b/drivers/media/usb/gspca/sn9c20x.c
index 5984bb12bcff..ab912903f8d7 100644
--- a/drivers/media/usb/gspca/sn9c20x.c
+++ b/drivers/media/usb/gspca/sn9c20x.c
@@ -1634,7 +1634,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
break;
case SENSOR_HV7131R:
sd->i2c_intf = 0x81; /* i2c 400 Kb/s */
- /* fall thru */
+ /* fall through */
default:
cam->cam_mode = vga_mode;
cam->nmodes = ARRAY_SIZE(vga_mode);
diff --git a/drivers/media/usb/gspca/sonixb.c b/drivers/media/usb/gspca/sonixb.c
index 5f3f2979540a..583c9f10198c 100644
--- a/drivers/media/usb/gspca/sonixb.c
+++ b/drivers/media/usb/gspca/sonixb.c
@@ -121,7 +121,7 @@ struct sensor_data {
/* We calculate the autogain at the end of the transfer of a frame, at this
moment a frame with the old settings is being captured and transmitted. So
- if we adjust the gain or exposure we must ignore atleast the next frame for
+ if we adjust the gain or exposure we must ignore at least the next frame for
the new settings to come into effect before doing any other adjustments. */
#define AUTOGAIN_IGNORE_FRAMES 1
@@ -757,7 +757,7 @@ static void setexposure(struct gspca_dev *gspca_dev)
/* Don't allow this to get below 10 when using autogain, the
steps become very large (relatively) when below 10 causing
- the image to oscilate from much too dark, to much too bright
+ the image to oscillate from much too dark, to much too bright
and back again. */
if (gspca_dev->autogain->val && reg10 < 10)
reg10 = 10;
diff --git a/drivers/media/usb/gspca/sonixj.c b/drivers/media/usb/gspca/sonixj.c
index df8d8482b795..a63f155f1515 100644
--- a/drivers/media/usb/gspca/sonixj.c
+++ b/drivers/media/usb/gspca/sonixj.c
@@ -2677,7 +2677,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
* which is 62 bytes long and is followed by various information
* including statuses and luminosity.
*
- * A marker may be splitted on two packets.
+ * A marker may be split on two packets.
*
* The 6th byte of a marker contains the bits:
* 0x08: USB full
diff --git a/drivers/media/usb/gspca/spca501.c b/drivers/media/usb/gspca/spca501.c
index 2cce74b166d8..3d215952af18 100644
--- a/drivers/media/usb/gspca/spca501.c
+++ b/drivers/media/usb/gspca/spca501.c
@@ -574,7 +574,7 @@ static const __u16 spca501_3com_open_data[][3] = {
{0x0, 0x0001, 0x0010}, /* TG Start Clock */
/* {0x2, 0x006a, 0x0001}, * C/S Enable ISOSYNCH Packet Engine */
- {0x2, 0x0068, 0x0001}, /* C/S Diable ISOSYNCH Packet Engine */
+ {0x2, 0x0068, 0x0001}, /* C/S Disable ISOSYNCH Packet Engine */
{0x2, 0x0000, 0x0005},
{0x2, 0x0043, 0x0000}, /* C/S Set Timing Mode, Disable TG soft reset */
{0x2, 0x0043, 0x0000}, /* C/S Set Timing Mode, Disable TG soft reset */
diff --git a/drivers/media/usb/gspca/sq905.c b/drivers/media/usb/gspca/sq905.c
index ffea9c35b0a0..d5c48216deb7 100644
--- a/drivers/media/usb/gspca/sq905.c
+++ b/drivers/media/usb/gspca/sq905.c
@@ -18,7 +18,7 @@
* History and Acknowledgments
*
* The original Linux driver for SQ905 based cameras was written by
- * Marcell Lengyel and furter developed by many other contributors
+ * Marcell Lengyel and further developed by many other contributors
* and is available from http://sourceforge.net/projects/sqcam/
*
* This driver takes advantage of the reverse engineering work done for
diff --git a/drivers/media/usb/gspca/sunplus.c b/drivers/media/usb/gspca/sunplus.c
index 437a3367ab97..e1e2a605a46c 100644
--- a/drivers/media/usb/gspca/sunplus.c
+++ b/drivers/media/usb/gspca/sunplus.c
@@ -555,7 +555,7 @@ static void init_ctl_reg(struct gspca_dev *gspca_dev)
case BRIDGE_SPCA504:
case BRIDGE_SPCA504C:
pollreg = 0;
- /* fall thru */
+ /* fall through */
default:
/* case BRIDGE_SPCA533: */
/* case BRIDGE_SPCA504B: */
@@ -638,7 +638,7 @@ static int sd_init(struct gspca_dev *gspca_dev)
reg_w_riv(gspca_dev, 0x00, 0x2000, 0x00);
reg_w_riv(gspca_dev, 0x00, 0x2301, 0x13);
reg_w_riv(gspca_dev, 0x00, 0x2306, 0x00);
- /* fall thru */
+ /* fall through */
case BRIDGE_SPCA533:
spca504B_PollingDataReady(gspca_dev);
spca50x_GetFirmware(gspca_dev);
diff --git a/drivers/media/usb/gspca/t613.c b/drivers/media/usb/gspca/t613.c
index 445782919446..ed9b925b723e 100644
--- a/drivers/media/usb/gspca/t613.c
+++ b/drivers/media/usb/gspca/t613.c
@@ -966,7 +966,7 @@ static int sd_init_controls(struct gspca_dev *gspca_dev)
V4L2_CID_SATURATION, 0, 0xf, 1, 5);
v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
V4L2_CID_GAMMA, 0, GAMMA_MAX, 1, 10);
- /* Activate lowlight, some apps dont bring up the
+ /* Activate lowlight, some apps don't bring up the
backlight_compensation control) */
v4l2_ctrl_new_std(hdl, &sd_ctrl_ops,
V4L2_CID_BACKLIGHT_COMPENSATION, 0, 1, 1, 1);
diff --git a/drivers/media/usb/gspca/touptek.c b/drivers/media/usb/gspca/touptek.c
index d1b9032d7863..6c056a448231 100644
--- a/drivers/media/usb/gspca/touptek.c
+++ b/drivers/media/usb/gspca/touptek.c
@@ -185,7 +185,7 @@ static const struct v4l2_pix_format vga_mode[] = {
};
/*
- * As theres no known frame sync, the only way to keep synced is to try hard
+ * As there's no known frame sync, the only way to keep synced is to try hard
* to never miss any packets
*/
#if MAX_NURBS < 4
@@ -259,7 +259,7 @@ static void setexposure(struct gspca_dev *gspca_dev, s32 val)
return;
}
gspca_dbg(gspca_dev, D_STREAM, "exposure: 0x%04X ms\n\n", value);
- /* Wonder if theres a good reason for sending it twice */
+ /* Wonder if there's a good reason for sending it twice */
/* probably not but leave it in because...why not */
reg_w(gspca_dev, value, REG_COARSE_INTEGRATION_TIME_);
reg_w(gspca_dev, value, REG_COARSE_INTEGRATION_TIME_);
diff --git a/drivers/media/usb/gspca/w996Xcf.c b/drivers/media/usb/gspca/w996Xcf.c
index abfab3de1866..36cc5a5ce77a 100644
--- a/drivers/media/usb/gspca/w996Xcf.c
+++ b/drivers/media/usb/gspca/w996Xcf.c
@@ -431,7 +431,7 @@ static void w9968cf_set_crop_window(struct sd *sd)
start_cropy = 35;
}
- /* Work around to avoid FP arithmetics */
+ /* Work around to avoid FP arithmetic */
#define SC(x) ((x) << 10)
/* Scaling factors */
diff --git a/drivers/media/usb/gspca/zc3xx-reg.h b/drivers/media/usb/gspca/zc3xx-reg.h
index 71fda38e85e0..26f6153b687f 100644
--- a/drivers/media/usb/gspca/zc3xx-reg.h
+++ b/drivers/media/usb/gspca/zc3xx-reg.h
@@ -26,7 +26,7 @@
/* Test mode */
#define ZC3XX_R00B_TESTMODECONTROL 0x000b
-/* Frame retreiving */
+/* Frame retrieving */
#define ZC3XX_R00C_LASTACQTIME 0x000c
#define ZC3XX_R00D_MONITORRES 0x000d
#define ZC3XX_R00E_TIMESTAMPHIGH 0x000e
diff --git a/drivers/media/usb/gspca/zc3xx.c b/drivers/media/usb/gspca/zc3xx.c
index cf21991e3d99..ad7194029031 100644
--- a/drivers/media/usb/gspca/zc3xx.c
+++ b/drivers/media/usb/gspca/zc3xx.c
@@ -3602,7 +3602,7 @@ static const struct usb_action pas106b_InitialScale[] = { /* 176x144 */
{0xaa, 0x14, 0x0081},
/* Other registers */
{0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION},
-/* Frame retreiving */
+/* Frame retrieving */
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
/* Gains */
{0xa0, 0xa0, ZC3XX_R1A8_DIGITALGAIN},
@@ -3718,7 +3718,7 @@ static const struct usb_action pas106b_Initial[] = { /* 352x288 */
{0xaa, 0x14, 0x0081},
/* Other registers */
{0xa0, 0x37, ZC3XX_R101_SENSORCORRECTION},
-/* Frame retreiving */
+/* Frame retrieving */
{0xa0, 0x00, ZC3XX_R019_AUTOADJUSTFPS},
/* Gains */
{0xa0, 0xa0, ZC3XX_R1A8_DIGITALGAIN},
@@ -6775,7 +6775,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
case SENSOR_HV7131R:
case SENSOR_TAS5130C:
reg_r(gspca_dev, 0x0008);
- /* fall thru */
+ /* fall through */
case SENSOR_PO2030:
reg_w(gspca_dev, 0x03, 0x0008);
break;
@@ -6824,7 +6824,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
case SENSOR_TAS5130C:
reg_w(gspca_dev, 0x09, 0x01ad); /* (from win traces) */
reg_w(gspca_dev, 0x15, 0x01ae);
- /* fall thru */
+ /* fall through */
case SENSOR_PAS202B:
case SENSOR_PO2030:
/* reg_w(gspca_dev, 0x40, ZC3XX_R117_GGAIN); in win traces */
diff --git a/drivers/media/usb/hdpvr/hdpvr.h b/drivers/media/usb/hdpvr/hdpvr.h
index 1d65b4185f57..fa43e1d45ea9 100644
--- a/drivers/media/usb/hdpvr/hdpvr.h
+++ b/drivers/media/usb/hdpvr/hdpvr.h
@@ -215,7 +215,7 @@ enum {
*/
/* :0 s 38 01 1700 0003 0001 1 = 00
- * VIDEO STANDARD or FREQUNCY 0 = 60hz, 1 = 50hz
+ * VIDEO STANDARD or FREQUENCY 0 = 60hz, 1 = 50hz
*/
/* :0 s 38 01 3100 0003 0004 4 = 03030000
diff --git a/drivers/media/usb/pwc/pwc-dec23.c b/drivers/media/usb/pwc/pwc-dec23.c
index 1283b3bd9800..854c36a5dec9 100644
--- a/drivers/media/usb/pwc/pwc-dec23.c
+++ b/drivers/media/usb/pwc/pwc-dec23.c
@@ -41,7 +41,7 @@
* UNROLL_LOOP_FOR_COPYING_BLOCK
* 0: use a loop for a smaller code (but little slower)
* 1: when unrolling the loop, gcc produces some faster code (perhaps only
- * valid for intel processor class). Activating this option, automaticaly
+ * valid for intel processor class). Activating this option, automatically
* activate USE_LOOKUP_TABLE_TO_CLAMP
*/
#define UNROLL_LOOP_FOR_COPY 1
@@ -332,7 +332,7 @@ void pwc_dec23_init(struct pwc_device *pdev, const unsigned char *cmd)
build_table_color(TimonRomTable[version][1], pdec->table_0004_pass2, pdec->table_8004_pass2);
}
- /* Informations can be coded on a variable number of bits but never less than 8 */
+ /* Information can be coded on a variable number of bits but never less than 8 */
shift = 8 - pdec->nbits;
pdec->scalebits = SCALEBITS - shift;
pdec->nbitsmask = 0xFF >> shift;
diff --git a/drivers/media/usb/pwc/pwc-if.c b/drivers/media/usb/pwc/pwc-if.c
index a81fb319b339..4e94197094ad 100644
--- a/drivers/media/usb/pwc/pwc-if.c
+++ b/drivers/media/usb/pwc/pwc-if.c
@@ -653,7 +653,7 @@ static int buffer_prepare(struct vb2_buffer *vb)
{
struct pwc_device *pdev = vb2_get_drv_priv(vb->vb2_queue);
- /* Don't allow queing new buffers after device disconnection */
+ /* Don't allow queueing new buffers after device disconnection */
if (!pdev->udev)
return -ENODEV;
diff --git a/drivers/media/usb/pwc/pwc-misc.c b/drivers/media/usb/pwc/pwc-misc.c
index 9be5adffa874..03888fc3804d 100644
--- a/drivers/media/usb/pwc/pwc-misc.c
+++ b/drivers/media/usb/pwc/pwc-misc.c
@@ -59,7 +59,7 @@ int pwc_get_size(struct pwc_device *pdev, int width, int height)
return i;
}
- /* Never reached there always is atleast one supported mode */
+ /* Never reached there always is at least one supported mode */
return 0;
}
diff --git a/drivers/media/usb/siano/smsusb.c b/drivers/media/usb/siano/smsusb.c
index 2ffded08407b..4fc03ec8a4f1 100644
--- a/drivers/media/usb/siano/smsusb.c
+++ b/drivers/media/usb/siano/smsusb.c
@@ -75,7 +75,7 @@ static int smsusb_submit_urb(struct smsusb_device_t *dev,
struct smsusb_urb_t *surb);
/*
- * Completing URB's callback handler - bottom half (proccess context)
+ * Completing URB's callback handler - bottom half (process context)
* submits the URB prepared on smsusb_onresponse()
*/
static void do_submit_urb(struct work_struct *work)
diff --git a/drivers/media/usb/stk1160/stk1160-core.c b/drivers/media/usb/stk1160/stk1160-core.c
index 468f5ccf4ae6..a44a44ff3bb1 100644
--- a/drivers/media/usb/stk1160/stk1160-core.c
+++ b/drivers/media/usb/stk1160/stk1160-core.c
@@ -297,7 +297,7 @@ static int stk1160_probe(struct usb_interface *interface,
return -ENOMEM;
/*
- * Scan usb posibilities and populate alt_max_pkt_size array.
+ * Scan usb possibilities and populate alt_max_pkt_size array.
* Also, check if device speed is fast enough.
*/
rc = stk1160_scan_usb(interface, udev, alt_max_pkt_size);
@@ -426,7 +426,7 @@ static void stk1160_disconnect(struct usb_interface *interface)
/*
* This calls stk1160_release if it's the last reference.
- * Otherwise, release is posponed until there are no users left.
+ * Otherwise, release is postponed until there are no users left.
*/
v4l2_device_put(&dev->v4l2_dev);
}
diff --git a/drivers/media/usb/stk1160/stk1160-reg.h b/drivers/media/usb/stk1160/stk1160-reg.h
index 7b08a3cc4504..2e400db0ad0e 100644
--- a/drivers/media/usb/stk1160/stk1160-reg.h
+++ b/drivers/media/usb/stk1160/stk1160-reg.h
@@ -23,7 +23,7 @@
/* GPIO Control */
#define STK1160_GCTRL 0x000
-/* Remote Wakup Control */
+/* Remote Wakeup Control */
#define STK1160_RMCTL 0x00c
/* Power-on Strapping Data */
@@ -104,7 +104,7 @@
#define STK1160_SBUSR_RA 0x208
#define STK1160_SBUSR_RD 0x209
-/* Alternate Serial Inteface Control */
+/* Alternate Serial Interface Control */
#define STK1160_ASIC 0x2fc
/* PLL Select Options */
diff --git a/drivers/media/usb/stkwebcam/stk-webcam.c b/drivers/media/usb/stkwebcam/stk-webcam.c
index 03f5e12b13a5..8f545861471e 100644
--- a/drivers/media/usb/stkwebcam/stk-webcam.c
+++ b/drivers/media/usb/stkwebcam/stk-webcam.c
@@ -1006,7 +1006,7 @@ static int stk_setup_format(struct stk_camera *dev)
stk_camera_write_reg(dev, 0x001c, 0x46);
/*
* Registers 0x0115 0x0114 are the size of each line (bytes),
- * regs 0x0117 0x0116 are the heigth of the image.
+ * regs 0x0117 0x0116 are the height of the image.
*/
stk_camera_write_reg(dev, 0x0115,
((stk_sizes[i].w * depth) >> 8) & 0xff);
diff --git a/drivers/media/usb/tm6000/tm6000-alsa.c b/drivers/media/usb/tm6000/tm6000-alsa.c
index b965931793b5..d6c79c13b332 100644
--- a/drivers/media/usb/tm6000/tm6000-alsa.c
+++ b/drivers/media/usb/tm6000/tm6000-alsa.c
@@ -58,7 +58,7 @@ module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "enable debug messages");
/****************************************************************************
- Module specific funtions
+ Module specific functions
****************************************************************************/
/*
diff --git a/drivers/media/usb/tm6000/tm6000-core.c b/drivers/media/usb/tm6000/tm6000-core.c
index d3229aa45fcb..2c723706f8c8 100644
--- a/drivers/media/usb/tm6000/tm6000-core.c
+++ b/drivers/media/usb/tm6000/tm6000-core.c
@@ -668,7 +668,7 @@ int tm6000_set_audio_rinput(struct tm6000_core *dev)
areg_f0 = 0x04;
break;
default:
- printk(KERN_INFO "%s: audio input dosn't support\n",
+ printk(KERN_INFO "%s: audio input doesn't support\n",
dev->name);
return 0;
break;
@@ -690,7 +690,7 @@ int tm6000_set_audio_rinput(struct tm6000_core *dev)
areg_eb = 0x04;
break;
default:
- printk(KERN_INFO "%s: audio input dosn't support\n",
+ printk(KERN_INFO "%s: audio input doesn't support\n",
dev->name);
return 0;
break;
diff --git a/drivers/media/usb/tm6000/tm6000-dvb.c b/drivers/media/usb/tm6000/tm6000-dvb.c
index 3a4e545c6037..36eea1950e77 100644
--- a/drivers/media/usb/tm6000/tm6000-dvb.c
+++ b/drivers/media/usb/tm6000/tm6000-dvb.c
@@ -149,7 +149,7 @@ static int tm6000_start_stream(struct tm6000_core *dev)
ret, __func__);
return ret;
} else
- printk(KERN_ERR "tm6000: pipe resetted\n");
+ printk(KERN_ERR "tm6000: pipe reset\n");
/* mutex_lock(&tm6000_driver.open_close_mutex); */
ret = usb_submit_urb(dvb->bulk_urb, GFP_ATOMIC);
diff --git a/drivers/media/usb/tm6000/tm6000-i2c.c b/drivers/media/usb/tm6000/tm6000-i2c.c
index 8c0476dfe54f..b37782d6f79c 100644
--- a/drivers/media/usb/tm6000/tm6000-i2c.c
+++ b/drivers/media/usb/tm6000/tm6000-i2c.c
@@ -155,7 +155,7 @@ static int tm6000_i2c_xfer(struct i2c_adapter *i2c_adap,
/*
* The TM6000 only supports a read transaction
* immediately after a 1 or 2 byte write to select
- * a register. We cannot fulfil this request.
+ * a register. We cannot fulfill this request.
*/
i2c_dprintk(2, " read without preceding write not supported");
rc = -EOPNOTSUPP;
diff --git a/drivers/media/usb/tm6000/tm6000-stds.c b/drivers/media/usb/tm6000/tm6000-stds.c
index c0c75951246b..858cb4f3a9ca 100644
--- a/drivers/media/usb/tm6000/tm6000-stds.c
+++ b/drivers/media/usb/tm6000/tm6000-stds.c
@@ -323,7 +323,7 @@ static int tm6000_set_audio_std(struct tm6000_core *dev)
{
uint8_t areg_02 = 0x04; /* GC1 Fixed gain 0dB */
uint8_t areg_05 = 0x01; /* Auto 4.5 = M Japan, Auto 6.5 = DK */
- uint8_t areg_06 = 0x02; /* Auto de-emphasis, mannual channel mode */
+ uint8_t areg_06 = 0x02; /* Auto de-emphasis, manual channel mode */
if (dev->radio) {
tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x00);
diff --git a/drivers/media/usb/tm6000/tm6000-video.c b/drivers/media/usb/tm6000/tm6000-video.c
index 5127be71dd03..072210f5f92f 100644
--- a/drivers/media/usb/tm6000/tm6000-video.c
+++ b/drivers/media/usb/tm6000/tm6000-video.c
@@ -180,7 +180,7 @@ static int copy_streams(u8 *data, unsigned long len,
field = (header >> 11) & 0x1;
line = (header >> 12) & 0x1ff;
cmd = (header >> 21) & 0x7;
- /* Validates haeder fields */
+ /* Validates header fields */
if (size > TM6000_URB_MSG_LEN)
size = TM6000_URB_MSG_LEN;
pktsize = TM6000_URB_MSG_LEN;
diff --git a/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c
index 6eb84cf007b4..4db7a013e049 100644
--- a/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c
+++ b/drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c
@@ -306,7 +306,7 @@ static int ttusb_boot_dsp(struct ttusb *ttusb)
b[3] = 28;
/* upload dsp code in 32 byte steps (36 didn't work for me ...) */
- /* 32 is max packet size, no messages should be splitted. */
+ /* 32 is max packet size, no messages should be split. */
for (i = 0; i < fw->size; i += 28) {
memcpy(&b[4], &fw->data[i], 28);
diff --git a/drivers/media/usb/ttusb-dec/ttusb_dec.c b/drivers/media/usb/ttusb-dec/ttusb_dec.c
index 44ca66cb9b8f..897ef5e1da71 100644
--- a/drivers/media/usb/ttusb-dec/ttusb_dec.c
+++ b/drivers/media/usb/ttusb-dec/ttusb_dec.c
@@ -284,7 +284,7 @@ static void ttusb_dec_handle_irq( struct urb *urb)
*
* this is an fact a bit too simple implementation;
* the box also reports a keyrepeat signal
- * (with buffer[3] == 0x40) in an intervall of ~100ms.
+ * (with buffer[3] == 0x40) in an interval of ~100ms.
* But to handle this correctly we had to imlemenent some
* kind of timer which signals a 'key up' event if no
* keyrepeat signal is received for lets say 200ms.
diff --git a/drivers/media/usb/usbvision/usbvision-core.c b/drivers/media/usb/usbvision/usbvision-core.c
index 2b843a7b27a4..92d166bf8c12 100644
--- a/drivers/media/usb/usbvision/usbvision-core.c
+++ b/drivers/media/usb/usbvision/usbvision-core.c
@@ -900,7 +900,7 @@ static enum parse_state usbvision_parse_lines_420(struct usb_usbvision *usbvisio
if ((frame->curline + 1) >= frame->frmheight)
return parse_state_next_frame;
- block_split = (pixel_per_line%y_block_size) ? 1 : 0; /* are some blocks splitted into different lines? */
+ block_split = (pixel_per_line%y_block_size) ? 1 : 0; /* are some blocks split into different lines? */
y_odd_offset = (pixel_per_line / y_block_size) * (y_block_size + uv_block_size)
+ block_split * uv_block_size;
@@ -1865,7 +1865,7 @@ static int usbvision_set_compress_params(struct usb_usbvision *usbvision)
value[4] = 0xA2; /* Reg.48 BUF_THR I'm not sure if this does something in not compressed mode. */
value[5] = 0x00; /* Reg.49 DVI_YUV This has nothing to do with compression */
- /* catched values for NT1004 */
+ /* caught values for NT1004 */
/* value[0] = 0xFF; Never apply intra mode automatically */
/* value[1] = 0xF1; Use full frame height for virtual strip width; One line per strip */
/* value[2] = 0x01; Force intra mode on all new frames */
@@ -1943,7 +1943,7 @@ int usbvision_set_input(struct usb_usbvision *usbvision)
/* SAA7113 uses 8 bit output */
value[0] = USBVISION_8_422_SYNC;
} else {
- /* I'm sure only about d2-d0 [010] 16 bit 4:2:2 usin sync pulses
+ /* I'm sure only about d2-d0 [010] 16 bit 4:2:2 using sync pulses
* as that is how saa7111 is configured */
value[0] = USBVISION_16_422_SYNC;
/* | USBVISION_VSNC_POL | USBVISION_VCLK_POL);*/
@@ -2146,7 +2146,7 @@ int usbvision_power_on(struct usb_usbvision *usbvision)
/*
* usbvision_begin_streaming()
- * Sure you have to put bit 7 to 0, if not incoming frames are droped, but no
+ * Sure you have to put bit 7 to 0, if not incoming frames are dropped, but no
* idea about the rest
*/
int usbvision_begin_streaming(struct usb_usbvision *usbvision)
diff --git a/drivers/media/usb/usbvision/usbvision.h b/drivers/media/usb/usbvision/usbvision.h
index d55088b4fd63..668167f8951d 100644
--- a/drivers/media/usb/usbvision/usbvision.h
+++ b/drivers/media/usb/usbvision/usbvision.h
@@ -135,11 +135,11 @@
#define MIN_FRAME_WIDTH 64
#define MAX_USB_WIDTH 320 /* 384 */
-#define MAX_FRAME_WIDTH 320 /* 384 */ /* streching sometimes causes crashes*/
+#define MAX_FRAME_WIDTH 320 /* 384 */ /* stretching sometimes causes crashes*/
#define MIN_FRAME_HEIGHT 48
#define MAX_USB_HEIGHT 240 /* 288 */
-#define MAX_FRAME_HEIGHT 240 /* 288 */ /* Streching sometimes causes crashes*/
+#define MAX_FRAME_HEIGHT 240 /* 288 */ /* Stretching sometimes causes crashes*/
#define MAX_FRAME_SIZE (MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT * MAX_BYTES_PER_PIXEL)
#define USBVISION_CLIPMASK_SIZE (MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT / 8) /* bytesize of clipmask */
@@ -177,7 +177,7 @@ enum {
* G = 1.164*(Y-16) - 0.813*(U-128) - 0.391*(V-128)
* R = 1.164*(Y-16) + 1.596*(U-128)
*
- * If you fancy integer arithmetics (as you should), hear this:
+ * If you fancy integer arithmetic (as you should), hear this:
*
* 65536*B = 76284*(Y-16) + 132252*(V-128)
* 65536*G = 76284*(Y-16) - 53281*(U-128) - 25625*(V-128)
@@ -438,7 +438,7 @@ struct usb_usbvision {
int last_compr_level; /* How strong (100) or weak (0) was compression */
int usb_bandwidth; /* Mbit/s */
- /* Statistics that can be overlayed on the screen */
+ /* Statistics that can be overlaid on the screen */
unsigned long isoc_urb_count; /* How many URBs we received so far */
unsigned long urb_length; /* Length of last URB */
unsigned long isoc_data_count; /* How many bytes we received */
diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
index e314657a1843..182dcac49aa3 100644
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -2008,7 +2008,7 @@ int uvc_video_init(struct uvc_streaming *stream)
usb_set_interface(stream->dev->udev, stream->intfnum, 0);
/* Set the streaming probe control with default streaming parameters
- * retrieved from the device. Webcams that don't suport GET_DEF
+ * retrieved from the device. Webcams that don't support GET_DEF
* requests on the probe control will just keep their current streaming
* parameters.
*/
diff --git a/drivers/media/usb/zr364xx/zr364xx.c b/drivers/media/usb/zr364xx/zr364xx.c
index 51aad2cf742f..96fee8d5b865 100644
--- a/drivers/media/usb/zr364xx/zr364xx.c
+++ b/drivers/media/usb/zr364xx/zr364xx.c
@@ -2,7 +2,7 @@
* Zoran 364xx based USB webcam module version 0.73
*
* Allows you to use your USB webcam with V4L2 applications
- * This is still in heavy developpement !
+ * This is still in heavy development !
*
* Copyright (C) 2004 Antoine Jacquet <royale@xxxxxxxxxx>
* http://royale.zerezo.com/zr364xx/
--
2.20.1
