On Sun, Feb 17, 2019 at 07:13:52PM +0000, Nix wrote: > On 16 Feb 2019, Greg KH told this: > > > On Sat, Feb 16, 2019 at 04:26:30PM +0000, Nix wrote: > >> So I just tried to connect up to my ancient Soekris firewall's serial > >> console to try to bisect a problem where it stopped booting in 4.20, and > >> found I couldn't. > >> > >> minicom says: > >> > >> minicom: cannot open /dev/ttyUSB0: Input/output error > >> > >> and in the dmesg we see > >> > >> [705576.028170] pl2303 ttyUSB0: failed to submit interrupt urb: -28 > >> > >> Booting to 4.19, everything works fine. (A random GalliumOS Chromebook > [...] > > > > bisection would be great, thanks! > > Rrrg. This is going to be harder than I thought. Rebooting, everything > works fine! So this is something that kicks in after something less than > eight days uptime, consistently on every box I own, but is fine on > reboot. Tough one. > I'm still fairly sure this is a regression -- my machines are often up > for a lot longer than that and I've never seen this before I upgraded to > 4.20.x -- but I don't think I'm going to identify it by mindless > bisection. I might have to actually *think* about it. I doubt it's a regression in usb-serial as essentially nothing changed with respect to pl2303 or core since 4.19. The -ENOSPC you're seeing is returned by the host controller to indicate: This request would overcommit the usb bandwidth reserved for periodic transfers (interrupt, isochronous). but if you're saying you can reproduce this on "every box" it may not be related to any particular host-controller driver (or USB topology). Johan
