From: JC Kuo <jckuo@xxxxxxxxxx>
This commit adds Tegra186 XUSB host mode controller support. This is
very similar to the existing support for Tegra124 and Tegra210, except
that the number of ports and PHYs differs and the IPFS wrapper being
gone.
Signed-off-by: JC Kuo <jckuo@xxxxxxxxxx>
Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
drivers/usb/host/xhci-tegra.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
index 49e033f953a2..9a07ea0f9c97 100644
--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -1423,9 +1423,34 @@ static const struct tegra_xusb_soc tegra210_soc = {
};
MODULE_FIRMWARE("nvidia/tegra210/xusb.bin");
+static const char * const tegra186_supply_names[] = {
+};
+
+static const struct tegra_xusb_phy_type tegra186_phy_types[] = {
+ { .name = "usb3", .num = 3, },
+ { .name = "usb2", .num = 3, },
+ { .name = "hsic", .num = 1, },
+};
+
+static const struct tegra_xusb_soc tegra186_soc = {
+ .firmware = "nvidia/tegra186/xusb.bin",
+ .supply_names = tegra186_supply_names,
+ .num_supplies = ARRAY_SIZE(tegra186_supply_names),
+ .phy_types = tegra186_phy_types,
+ .num_types = ARRAY_SIZE(tegra186_phy_types),
+ .ports = {
+ .usb3 = { .offset = 0, .count = 3, },
+ .usb2 = { .offset = 3, .count = 3, },
+ .hsic = { .offset = 6, .count = 1, },
+ },
+ .scale_ss_clock = false,
+ .has_ipfs = false,
+};
+
static const struct of_device_id tegra_xusb_of_match[] = {
{ .compatible = "nvidia,tegra124-xusb", .data = &tegra124_soc },
{ .compatible = "nvidia,tegra210-xusb", .data = &tegra210_soc },
+ { .compatible = "nvidia,tegra186-xusb", .data = &tegra186_soc },
{ },
};
MODULE_DEVICE_TABLE(of, tegra_xusb_of_match);
--
2.19.1
