RE: [PATCH v2 1/3] usb: ehci: fsl: Update register accessing for arm/arm64 platforms

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 18 Jan 2019, Ran Wang wrote:

> Hi Alan,
> 
> On January 18, 2019 00:08, Alan Stern wrote:
> > 
> > On Thu, 17 Jan 2019, Ran Wang wrote:
> > 
> > > arm/arm64's io.h doesn't define clrbits32() and clrsetbits_be32(),
> > > which causing compile failure on some Layerscape Platforms (such as
> > > LS1021A and LS2012A which also integrates FSL EHCI controller). So use
> > > ioread32be()/iowrite32be() instead to make it workable on both powerpc
> > > and arm.
> > 
> > For patches 1/3 and 3/3:
> > 
> > Acked-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
> > 
> > Have you tested these on the Layerscape platforms to make sure they work
> > correctly?
> 
> To be honest, the first goal of this patch set is to fix compile issue. 
> And I have verified it on LS1012AQDS, and encountered failure as below:
> 
> [    2.966755] ehci-fsl: Freescale EHCI Host controller driver
> [    2.973113] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
> [    2.979851] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 3
> [    2.987549] fsl-ehci fsl-ehci.0: irq 22, io mem 0x08600000
> [    3.005769] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 0.00
> [    3.012122] hub 3-0:1.0: USB hub found
> [    3.016088] hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
> 
> However, actually the only board which I can find so far has known HW issue on
> EHCI part, so I plan to find other platform to do complete verification when
> possible. And will submit other fix if needed. Is that OK?
> 
> BTW, for powerpc platform, I've tested on a T1042AD4RDB and USB worked fine with it.

Okay, that's good.

Alan Stern




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux