Hi Matthias,
On Tue, 2019-01-15 at 16:19 +0100, Matthias Brugger wrote:
>
> On 15/01/2019 02:43, min.guo@xxxxxxxxxxxx wrote:
> > From: Min Guo <min.guo@xxxxxxxxxxxx>
> >
> > Add a common interface for set data toggle
> >
> > Signed-off-by: Min Guo <min.guo@xxxxxxxxxxxx>
> > ---
> > drivers/usb/musb/musb_host.c | 37 +++++++++++++++++++++++--------------
> > 1 file changed, 23 insertions(+), 14 deletions(-)
> >
> > diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
> > index b59ce9a..16d0ba4 100644
> > --- a/drivers/usb/musb/musb_host.c
> > +++ b/drivers/usb/musb/musb_host.c
> > @@ -306,6 +306,25 @@ static inline void musb_save_toggle(struct musb_qh *qh, int is_in,
> > usb_settoggle(urb->dev, qh->epnum, !is_in, csr ? 1 : 0);
> > }
> >
> > +static inline u16 musb_set_toggle(struct musb_qh *qh, int is_in,
> > + struct urb *urb)
> > +{
> > + u16 csr = 0;
> > + u16 toggle = 0;
> > +
> > + toggle = usb_gettoggle(urb->dev, qh->epnum, !is_in);
> > +
> > + if (is_in)
> > + csr = toggle ? (MUSB_RXCSR_H_WR_DATATOGGLE
> > + | MUSB_RXCSR_H_DATATOGGLE) : 0;
> > + else
> > + csr = toggle ? (MUSB_TXCSR_H_WR_DATATOGGLE
> > + | MUSB_TXCSR_H_DATATOGGLE)
> > + : MUSB_TXCSR_CLRDATATOG;
>
> Can we switch the if and use is_out logic as function parameter. This would make
> the code easier to understand.
Okay.
> Regards,
> Matthias
>
> > +
> > + return csr;
> > +}
> > +
> > /*
> > * Advance this hardware endpoint's queue, completing the specified URB and
> > * advancing to either the next URB queued to that qh, or else invalidating
> > @@ -772,13 +791,8 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
> > );
> > csr |= MUSB_TXCSR_MODE;
> >
> > - if (!hw_ep->tx_double_buffered) {
> > - if (usb_gettoggle(urb->dev, qh->epnum, 1))
> > - csr |= MUSB_TXCSR_H_WR_DATATOGGLE
> > - | MUSB_TXCSR_H_DATATOGGLE;
> > - else
> > - csr |= MUSB_TXCSR_CLRDATATOG;
> > - }
> > + if (!hw_ep->tx_double_buffered)
> > + csr |= musb_set_toggle(qh, !is_out, urb);
> >
> > musb_writew(epio, MUSB_TXCSR, csr);
> > /* REVISIT may need to clear FLUSHFIFO ... */
> > @@ -860,17 +874,12 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
> >
> > /* IN/receive */
> > } else {
> > - u16 csr;
> > + u16 csr = 0;
> >
> > if (hw_ep->rx_reinit) {
> > musb_rx_reinit(musb, qh, epnum);
> > + csr |= musb_set_toggle(qh, !is_out, urb);
> >
> > - /* init new state: toggle and NYET, maybe DMA later */
> > - if (usb_gettoggle(urb->dev, qh->epnum, 0))
> > - csr = MUSB_RXCSR_H_WR_DATATOGGLE
> > - | MUSB_RXCSR_H_DATATOGGLE;
> > - else
> > - csr = 0;
> > if (qh->type == USB_ENDPOINT_XFER_INT)
> > csr |= MUSB_RXCSR_DISNYET;
> >
> >
