Bin Liu <b-liu@xxxxxx> writes: > On Mon, Dec 17, 2018 at 07:16:08PM +0000, Måns Rullgård wrote: >> Bin Liu <b-liu@xxxxxx> writes: >> >> > Hi, >> > >> > On Mon, Dec 17, 2018 at 03:13:12PM +0000, Måns Rullgård wrote: >> >> I have a strange problem with the musb driver in host mode on AM3358 >> >> (beaglebone) hardware. If I connect a multi-port serial adapter and >> >> open two or more of the ttys, then unplug the device, an interrupt storm >> >> ensues that makes the system completely unresponsive until the watchdog >> >> resets it. Enabling some debug messages, I get this repeated endlessly: >> >> >> >> musb-hdrc musb-hdrc.1: usbintr (0) epintr(1c0000) >> >> musb-hdrc musb-hdrc.1: end 2 RX proto error >> >> musb-hdrc musb-hdrc.1: ... next ep2 RX urb 72aabc13 >> >> musb-hdrc musb-hdrc.1: <-- hw2 urb 72aabc13 spd3 dev4 ep3in h_addr02 h_port00 bytes 4096 >> >> musb-hdrc musb-hdrc.1: RXCSR2 := 2020 >> >> musb-hdrc musb-hdrc.1: end 3 RX proto error >> >> musb-hdrc musb-hdrc.1: ... next ep3 RX urb 94c2cc43 >> >> musb-hdrc musb-hdrc.1: <-- hw3 urb 94c2cc43 spd3 dev4 ep2in h_addr02 h_port00 bytes 4096 >> >> musb-hdrc musb-hdrc.1: RXCSR3 := 2020 >> >> musb-hdrc musb-hdrc.1: end 4 RX proto error >> >> musb-hdrc musb-hdrc.1: ... next ep4 RX urb cbdc39c6 >> >> musb-hdrc musb-hdrc.1: <-- hw4 urb cbdc39c6 spd3 dev4 ep5in h_addr02 h_port00 bytes 4096 >> >> musb-hdrc musb-hdrc.1: RXCSR4 := 2020 >> >> >> >> This happens with both a two-port FTDI serial adapter and a Simcom GSM >> >> modem (Qualcomm based) using the "option" driver. In both cases, the >> >> problem occurs only if two or more of the ttys are opened when the >> >> device is unplugged. >> > >> > Please help me to understand the test case so that I can try to >> > replicate the issue - if I connect a multi-port FTDI adapter, use cat >> > command to open more than one port then unplug the adapter, I should >> > see the flooding debug messages? >> >> Yes, that's what I'm seeing. Obviously, you have to first enable those >> debug messages. Otherwise it just stops dead in its tracks. >> >> I forgot to mention, I also tried making the interrupt handler threaded. >> This allows the system to remain slightly responsive, but it never >> recovers. >> >> > On which kernel version do you see the problem? >> >> This was on 4.19.9. I don't see any later commits that look related, >> but I can try some other tree if you suggest one. > > This should be fine. The driver was barely touched recently. > I have only a few days left for 2018, let me try to reproduce it first > after I am back in Jan. In case it helps, the musb variant in the Allwinner A20 doesn't suffer from this problem. -- Måns Rullgård
