[PATCH v4] usb: hub: add retry routine after intr URB submit error

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The hub sends hot-plug events to the host trough it's interrupt URB. The
driver takes care of completing the URB and re-submitting it. Completion
errors are handled in the hub_event() work, yet submission errors are
ignored, rendering the device unresponsive. All further events are lost.

It is fairly hard to find this issue in the wild, since you have to time
the USB hot-plug event with the URB submission failure. For instance it
could be the system running out of memory or some malfunction in the USB
controller driver. Nevertheless, it's pretty reasonable to think it'll
happen sometime. One can trigger this issue using eBPF's function
override feature (see BCC's inject.py script).

This patch adds a retry routine to the event of a submission error. The
HUB driver will try to re-submit the URB once every second until it's
successful or the HUB is disconnected.

As some USB subsystems already take care of this issue, the
implementation was inspired from usbhid/hid_core.c's.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
Reviewed-by: Oliver Neukum <oneukum@xxxxxxxx>

---

v4:
  - Add Oliver's Reviewed-by
  - Make timeout calculation simpler

v3: As per Oliver's request:
  - Take care of race condition between disconnect and irq

v2: as per Alan's and Oliver's comments:
  - Rename timer
  - Delete the timer on disconnect
  - Don't reset HUB nor exponential slowdown the timer, 1s fixed retry
    period
  - Check for -ESHUTDOWN prior kicking the timer

 drivers/usb/core/hub.c | 43 ++++++++++++++++++++++++++++++++++++------
 drivers/usb/core/hub.h |  2 ++
 2 files changed, 39 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 1d1e61e980f3..713ab85332f8 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -607,6 +607,36 @@ static int hub_port_status(struct usb_hub *hub, int port1,
 				   status, change, NULL);
 }
 
+static void hub_resubmit_irq_urb(struct usb_hub *hub)
+{
+	unsigned long flags;
+	int status;
+
+	spin_lock_irqsave(&hub->irq_urb_lock, flags);
+
+	if (hub->quiescing) {
+		spin_unlock_irqrestore(&hub->irq_urb_lock, flags);
+		return;
+	}
+
+	status = usb_submit_urb(hub->urb, GFP_ATOMIC);
+	if (status && status != -ENODEV && status != -EPERM &&
+	    status != -ESHUTDOWN) {
+		dev_err(hub->intfdev, "resubmit --> %d\n", status);
+		mod_timer(&hub->irq_urb_retry, jiffies + HZ);
+	}
+
+	spin_unlock_irqrestore(&hub->irq_urb_lock, flags);
+}
+
+static void hub_retry_irq_urb(struct timer_list *t)
+{
+	struct usb_hub *hub = from_timer(hub, t, irq_urb_retry);
+
+	hub_resubmit_irq_urb(hub);
+}
+
+
 static void kick_hub_wq(struct usb_hub *hub)
 {
 	struct usb_interface *intf;
@@ -709,12 +739,7 @@ static void hub_irq(struct urb *urb)
 	kick_hub_wq(hub);
 
 resubmit:
-	if (hub->quiescing)
-		return;
-
-	status = usb_submit_urb(hub->urb, GFP_ATOMIC);
-	if (status != 0 && status != -ENODEV && status != -EPERM)
-		dev_err(hub->intfdev, "resubmit --> %d\n", status);
+	hub_resubmit_irq_urb(hub);
 }
 
 /* USB 2.0 spec Section 11.24.2.3 */
@@ -1264,10 +1289,13 @@ enum hub_quiescing_type {
 static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type)
 {
 	struct usb_device *hdev = hub->hdev;
+	unsigned long flags;
 	int i;
 
 	/* hub_wq and related activity won't re-trigger */
+	spin_lock_irqsave(&hub->irq_urb_lock, flags);
 	hub->quiescing = 1;
+	spin_unlock_irqrestore(&hub->irq_urb_lock, flags);
 
 	if (type != HUB_SUSPEND) {
 		/* Disconnect all the children */
@@ -1278,6 +1306,7 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type)
 	}
 
 	/* Stop hub_wq and related activity */
+	del_timer_sync(&hub->irq_urb_retry);
 	usb_kill_urb(hub->urb);
 	if (hub->has_indicators)
 		cancel_delayed_work_sync(&hub->leds);
@@ -1810,6 +1839,8 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	INIT_DELAYED_WORK(&hub->leds, led_work);
 	INIT_DELAYED_WORK(&hub->init_work, NULL);
 	INIT_WORK(&hub->events, hub_event);
+	spin_lock_init(&hub->irq_urb_lock);
+	timer_setup(&hub->irq_urb_retry, hub_retry_irq_urb, 0);
 	usb_get_intf(intf);
 	usb_get_dev(hdev);
 
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index 4accfb63f7dc..a9e24e4b8df1 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -69,6 +69,8 @@ struct usb_hub {
 	struct delayed_work	leds;
 	struct delayed_work	init_work;
 	struct work_struct      events;
+	spinlock_t		irq_urb_lock;
+	struct timer_list	irq_urb_retry;
 	struct usb_port		**ports;
 };
 
-- 
2.20.1




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux