The mii_check_media() is called to read out the PHY status registers
and update the internal status reported by mii_ethtool_gset(), just
replace it with phydev compatible phy_read_status().
Signed-off-by: Marek Vasut <marex@xxxxxxx>
Cc: David S. Miller <davem@xxxxxxxxxxxxx>
Cc: Nisar Sayed <Nisar.Sayed@xxxxxxxxxxxxx>
Cc: Woojung Huh <Woojung.Huh@xxxxxxxxxxxxx>
Cc: Andrew Lunn <andrew@xxxxxxx>
Cc: Florian Fainelli <f.fainelli@xxxxxxxxx>
Cc: linux-usb@xxxxxxxxxxxxxxx
To: netdev@xxxxxxxxxxxxxxx
---
drivers/net/usb/smsc95xx.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index b04df07d882e..14a83358cb35 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -540,7 +540,6 @@ static int smsc95xx_phy_update_flowcontrol(struct usbnet *dev, u8 duplex,
static int smsc95xx_link_reset(struct usbnet *dev)
{
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
- struct mii_if_info *mii = &dev->mii;
struct ethtool_link_ksettings ecmd;
unsigned long flags;
u16 lcladv, rmtadv;
@@ -555,7 +554,7 @@ static int smsc95xx_link_reset(struct usbnet *dev)
if (ret < 0)
return ret;
- mii_check_media(mii, 1, 1);
+ phy_read_status(pdata->phydev);
phy_ethtool_ksettings_get(pdata->phydev, &ecmd);
lcladv = phy_read(pdata->phydev, MII_ADVERTISE);
rmtadv = phy_read(pdata->phydev, MII_LPA);
--
2.19.2
