uname: Linux archlinux 4.19.12-arch1-1-ARCH #1 SMP PREEMPT Fri Dec 21 13:56:54 UTC 2018 x86_64 GNU/Linux liquid <outmatch@xxxxxxxxx> 于2018年12月27日周四 上午9:17写道： > > Rumbling function on SHANWAN DS3 clone joystick doesn't work. > Meanwhile it can work fine on Windows ScpToolkit v1.7.277.16103-BETA. > (Tested with PCSX2 lilypad Win32 build). > > SDL2/test/testhaptic was able to find out its supported effect. But NO > rumble at all. > INFO: 1 Haptic devices detected. > INFO: Device: SHANWAN PS3 GamePad > INFO: Supported effects [16 effects, 16 playing]: > INFO: sine > INFO: triangle > INFO: left/right > INFO: Supported capabilities: > INFO: gain > INFO: > Uploading effects > INFO: effect 0: Sine Wave > INFO: effect 1: Left/Right > INFO: > Now playing effects for 5 seconds each with 1 second delay between > INFO: Playing effect 0 > INFO: Playing effect 1 > > lsusb: > Bus 001 Device 017: ID 054c:0268 Sony Corp. Batoh Device / PlayStation > 3 Controller > > lsusb -v: > Bus 001 Device 017: ID 054c:0268 Sony Corp. Batoh Device / PlayStation > 3 Controller > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 1.10 > bDeviceClass 0 > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 64 > idVendor 0x054c Sony Corp. > idProduct 0x0268 Batoh Device / PlayStation 3 Controller > bcdDevice 1.00 > iManufacturer 1 SHANWAN > iProduct 2 PS3 GamePad > iSerial 0 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 0x0029 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 0 > bmAttributes 0x80 > (Bus Powered) > MaxPower 500mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 3 Human Interface Device > bInterfaceSubClass 0 > bInterfaceProtocol 0 > iInterface 0 > HID Device Descriptor: > bLength 9 > bDescriptorType 33 > bcdHID 1.10 > bCountryCode 0 Not supported > bNumDescriptors 1 > bDescriptorType 34 Report > wDescriptorLength 148 > Report Descriptors: > ** UNAVAILABLE ** > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x02 EP 2 OUT > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0040 1x 64 bytes > bInterval 1 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0040 1x 64 bytes > bInterval 1 > Device Status: 0x0004 > (Bus Powered) > Test Mode
