Since "usb: gadget: uvc: enqueue uvc_request_data in setup handler
for control OUT requests" it is no longer necessary for userspace to
call ioctl UVCIOC_SEND_RESPONSE in response to receiving a
UVC_EVENT_SETUP from the uvc function driver for a control OUT request.
This change means that for control OUT userspace will receive a
UVC_EVENT_SETUP and not do anything with it. This is a waste of a pair
of context switches, so we put the setup and data stage data into a
single UVC_EVENT_DATA to give to userspace. Previously struct
uvc_request_data had 60 bytes allocated for data, and since uvc data at
most is 34 bytes in UVC 1.1 and 48 bytes in UVC 1.5, we can afford to
cut out 8 bytes to store the setup control.
Since the setup control is discarded after the handling of the setup
stage, it must be saved in struct uvc_device during the setup handler in
order for the data stage handler to be able to read it and send it to
userspace.
Signed-off-by: Paul Elder <paul.elder@xxxxxxxxxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
No change from v2
No change from v1
drivers/usb/gadget/function/f_uvc.c | 3 +++
drivers/usb/gadget/function/uvc.h | 1 +
include/uapi/linux/usb/g_uvc.h | 3 ++-
3 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c
index 772c99c297fc..d08957124e42 100644
--- a/drivers/usb/gadget/function/f_uvc.c
+++ b/drivers/usb/gadget/function/f_uvc.c
@@ -215,6 +215,8 @@ uvc_function_ep0_complete(struct usb_ep *ep, struct usb_request *req)
v4l2_event.type = UVC_EVENT_DATA;
uvc_event->data.length = req->actual;
memcpy(&uvc_event->data.data, req->buf, req->actual);
+ memcpy(&uvc_event->data.setup, &uvc->control_setup,
+ sizeof(uvc_event->data.setup));
v4l2_event_queue(&uvc->vdev, &v4l2_event);
}
}
@@ -238,6 +240,7 @@ uvc_function_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
*/
uvc->event_setup_out = !(ctrl->bRequestType & USB_DIR_IN);
uvc->event_length = le16_to_cpu(ctrl->wLength);
+ memcpy(&uvc->control_setup, ctrl, sizeof(uvc->control_setup));
if (uvc->event_setup_out) {
struct usb_request *req = uvc->control_req;
diff --git a/drivers/usb/gadget/function/uvc.h b/drivers/usb/gadget/function/uvc.h
index 671020c8a836..1d89b1df4ba0 100644
--- a/drivers/usb/gadget/function/uvc.h
+++ b/drivers/usb/gadget/function/uvc.h
@@ -163,6 +163,7 @@ struct uvc_device {
unsigned int control_intf;
struct usb_ep *control_ep;
struct usb_request *control_req;
+ struct usb_ctrlrequest control_setup;
void *control_buf;
unsigned int streaming_intf;
diff --git a/include/uapi/linux/usb/g_uvc.h b/include/uapi/linux/usb/g_uvc.h
index 6698c3263ae8..10fbb4382925 100644
--- a/include/uapi/linux/usb/g_uvc.h
+++ b/include/uapi/linux/usb/g_uvc.h
@@ -24,7 +24,8 @@
struct uvc_request_data {
__s32 length;
- __u8 data[60];
+ struct usb_ctrlrequest setup;
+ __u8 data[52];
};
struct uvc_event {
--
2.19.2
