The code to prevent a bus suspend if a USB3 port was still in link training
also reacted to USB2 port polling state.
This caused bus suspend to busyloop in some cases.
USB2 polling state is different from USB3, and should not prevent bus
suspend.
Limit the USB3 link training state check to USB3 root hub ports only.
The origial commit went to stable so this need to be applied there as well
Fixes: 2f31a67f01a8 ("usb: xhci: Prevent bus suspend if a port connect change or polling state is detected")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
---
drivers/usb/host/xhci-hub.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 94aca1b..01b5818 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1507,7 +1507,8 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
portsc_buf[port_index] = 0;
/* Bail out if a USB3 port has a new device in link training */
- if ((t1 & PORT_PLS_MASK) == XDEV_POLLING) {
+ if ((hcd->speed >= HCD_USB3) &&
+ (t1 & PORT_PLS_MASK) == XDEV_POLLING) {
bus_state->bus_suspended = 0;
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_dbg(xhci, "Bus suspend bailout, port in polling\n");
--
2.7.4
