Hi,
>
>On Wed, Dec 12, 2018 at 3:49 AM Pawel Laszczak <pawell@xxxxxxxxxxx> wrote:
>>
>> Hi,
>>
>> >On 10/12/18 7:42 AM, Peter Chen wrote:
>> >>>> +static struct usb_ep *cdns3_gadget_match_ep(struct usb_gadget *gadget,
>> >>>> + struct usb_endpoint_descriptor *desc,
>> >>>> + struct usb_ss_ep_comp_descriptor *comp_desc)
>> >>>> +{
>> >>>> + struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
>> >>>> + struct cdns3_endpoint *priv_ep;
>> >>>> + unsigned long flags;
>> >>>> +
>> >>>> + priv_ep = cdns3_find_available_ss_ep(priv_dev, desc);
>> >>>> + if (IS_ERR(priv_ep)) {
>> >>>> + dev_err(&priv_dev->dev, "no available ep\n");
>> >>>> + return NULL;
>> >>>> + }
>> >>>> +
>> >>>> + dev_dbg(&priv_dev->dev, "match endpoint: %s\n", priv_ep->name);
>> >>>> +
>> >>>> + spin_lock_irqsave(&priv_dev->lock, flags);
>> >>>> + priv_ep->endpoint.desc = desc;
>> >>>> + priv_ep->dir = usb_endpoint_dir_in(desc) ? USB_DIR_IN : USB_DIR_OUT;
>> >>>> + priv_ep->type = usb_endpoint_type(desc);
>> >>>> +
>> >>>> + list_add_tail(&priv_ep->ep_match_pending_list,
>> >>>> + &priv_dev->ep_match_list);
>> >>>> + spin_unlock_irqrestore(&priv_dev->lock, flags);
>> >>>> + return &priv_ep->endpoint;
>> >>>> +}
>> >>> Why do you need a custom match_ep?
>> >>> doesn't usb_ep_autoconfig suffice?
>> >>>
>> >>> You can check if EP is claimed or not by checking the ep->claimed flag.
>> >>>
>> >> It is a special requirement for this IP, the EP type and MaxPacketSize
>> >> changing can't be done at runtime, eg, at ep->enable. See below commit
>> >> for detail.
>> >>
>> >> usb: cdns3: gadget: configure all endpoints before set configuration
>> >>
>> >> Cadence IP has one limitation that all endpoints must be configured
>> >> (Type & MaxPacketSize) before setting configuration through hardware
>> >> register, it means we can't change endpoints configuration after
>> >> set_configuration.
>> >>
>> >> In this patch, we add non-control endpoint through usb_ss->ep_match_list,
>> >> which is added when the gadget driver uses usb_ep_autoconfig to configure
>> >> specific endpoint; When the udc driver receives set_configurion request,
>> >> it goes through usb_ss->ep_match_list, and configure all endpoints
>> >> accordingly.
>> >>
>> >> At usb_ep_ops.enable/disable, we only enable and disable endpoint through
>> >> ep_cfg register which can be changed after set_configuration, and do
>> >> some software operation accordingly.
>> >
>> >All this should be part of comments in code along with information about
>> >controller versions which suffer from the errata.
>> >
>> >Is there a version of controller available which does not have the
>> >defect? Is there a future plan to fix this?
>> >
>> >If any of that is yes, you probably want to handle this with runtime
>> >detection of version (like done with DWC3_REVISION_XXX macros).
>> >Sometimes the hardware-read versions themselves are incorrect, so its
>> >better to introduce a version specific compatible too like
>> >"cdns,usb-1.0.0" (as hinted to by Rob Herring as well).
>> >
>>
>> custom match_ep is used and works with all versions of the gen1
>> controller. Future (gen2) releases of the controller won’t have such
>> limitation but there is no plan to change current (gen1) functionality
>> of the controller.
>>
>> I will add comment before cdns3_gadget_match_ep function.
>> Also I will change cdns,usb3 to cdns,usb3-1.0.0 and add additional
>> cdns,usb3-1.0.1 compatible.
>>
>> cdns,usb3-1.0.1 will be for current version of controller which I use.
>> cdns,usb3-1.0.0 will be for older version - Peter Chan platform.
>> I now that I have some changes in controller, and one of them require
>> some changes in DRD driver. It will be safer to add two separate
>> version in compatibles.
>>
>
>Pawel, could we have correct register to show controller version? It is
>better we could version judgement at runtime instead of static compatible.
>
Ok, I will tray do this in this way.
Pawel
