On Tue, Dec 11, 2018 at 06:28:28PM +0100, Jörgen Storvist wrote: > Added USB serial option driver support for GosunCn ZTE WeLink ME3630 > series cellular modules for USB modes ECM/NCM and MBIM. > > Signed-off-by: Jörgen Storvist <jorgen.storvist@xxxxxxxxx> > --- > > usb-devices output MBIM mode: > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=19d2 ProdID=0602 Rev=03.18 > S: Manufacturer=Android > S: Product=Android > S: SerialNumber=b950269c > C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA > I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option > I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option > I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option > I: If#= 3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim > I: If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim > > usb-devices output ECM/NCM mode: > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=480 MxCh= 0 > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=19d2 ProdID=1476 Rev=03.18 > S: Manufacturer=Android > S: Product=Android > S: SerialNumber=b950269c > C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA > I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option > I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option > I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option > I: If#= 3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether > I: If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I included these in the commit messages (without the serial numbers), and used the vendor define since we already have it. These looked too out of place with the other ZTE entries otherwise. :) Thanks, Johan
