Panagiotis Papadakos wrote:
Hi.
When I connect my ext4 formatted Seagate 1.5 TB USB box,
I get the messages of the style:
[sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[sdb] Sense Key : Illegal Request [current]
[sdb] Add. Sense: Logical block address out of range
By the way I am not getting such messages with 2.6.29.
Anyone knows what might be wrong?
Sounds like something's messing up with the disk size detection, as it
gets detected as a 2TB drive. CCing linux-usb and linux-scsi.
Apr 27 20:42:15 cray-7 kernel: [ 7.600940] scsi 2:0:0:0:
Direct-Access ST315003 41AS PQ: 0 ANSI: 2
Apr 27 20:42:15 cray-7 kernel: [ 7.601701] sd 2:0:0:0: Attached scsi
generic sg2 type 0
Apr 27 20:42:15 cray-7 kernel: [ 7.623420] sd 2:0:0:0: [sdb] Very big
device. Trying to use READ CAPACITY(16).
Apr 27 20:42:15 cray-7 kernel: [ 7.624694] sd 2:0:0:0: [sdb] Using
0xffffffff as device size
Apr 27 20:42:15 cray-7 kernel: [ 7.624703] sd 2:0:0:0: [sdb]
4294967296 512-byte hardware sectors: (2.19 TB/2.00 TiB)
Apr 27 20:42:15 cray-7 kernel: [ 7.627074] sd 2:0:0:0: [sdb] Write
Protect is off
Apr 27 20:42:15 cray-7 kernel: [ 7.649077] sd 2:0:0:0: [sdb] Very big
device. Trying to use READ CAPACITY(16).
Apr 27 20:42:15 cray-7 kernel: [ 7.650288] sd 2:0:0:0: [sdb] Using
0xffffffff as device size
Apr 27 20:42:15 cray-7 kernel: [ 7.652566] sdb: unknown partition table
Apr 27 20:42:15 cray-7 kernel: [ 7.674807] sd 2:0:0:0: [sdb] Attached
SCSI disk
Apr 27 20:42:15 cray-7 kernel: [ 7.683409] sd 2:0:0:0: [sdb] Result:
hostbyte=DID_OK driverbyte=DRIVER_SENSE
Apr 27 20:42:15 cray-7 kernel: [ 7.683418] sd 2:0:0:0: [sdb] Sense
Key : Illegal Request [current]
Apr 27 20:42:15 cray-7 kernel: [ 7.683425] sd 2:0:0:0: [sdb] Add.
Sense: Logical block address out of range
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html