Hi Vignesh, On 06/12/18 12:32, Vignesh R wrote: > Hi Roger, > > On 05/12/18 8:49 PM, Roger Quadros wrote: >> The AM654 SoC from TI contains a DWC3 controller. Add >> support for it. >> >> Signed-off-by: Roger Quadros <rogerq@xxxxxx> >> --- >> Documentation/devicetree/bindings/usb/keystone-usb.txt | 4 ++-- >> 1 file changed, 2 insertions(+), 2 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/usb/keystone-usb.txt b/Documentation/devicetree/bindings/usb/keystone-usb.txt >> index f96e09f..fa29ff8 100644 >> --- a/Documentation/devicetree/bindings/usb/keystone-usb.txt >> +++ b/Documentation/devicetree/bindings/usb/keystone-usb.txt >> @@ -3,7 +3,7 @@ TI Keystone Soc USB Controller >> DWC3 GLUE >> >> Required properties: >> - - compatible: should be "ti,keystone-dwc3". >> + - compatible: should be "ti,keystone-dwc3" or "ti,am654-dwc3". > > Convention is to have one compatible per line: > compatible: Should be > "ti,am654-dwc3" for AM654 SoCs > "ti,keystone-dwc3" for K2 SoCs > OK. Will fix it up. Thanks. cheers, -roger > > >> - #address-cells, #size-cells : should be '1' if the device has sub-nodes >> with 'reg' property. >> - reg : Address and length of the register set for the USB subsystem on >> @@ -21,7 +21,7 @@ SoCs only: >> - clock-names: Must be "usb". >> >> >> -The following are mandatory properties for Keystone 2 66AK2G SoCs only: >> +The following are mandatory properties for 66AK2G and AM654: >> >> - power-domains: Should contain a phandle to a PM domain provider node >> and an args specifier containing the USB device id >> > -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
