[PATCH 1/1] usb: chipidea: imx: improve the over current handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The current OC (Over Current) handling does not consider the default
and bootloader OC setting well, in this commit, we reset OC setting
according to dts value:
- If property "disable-over-current" is set, we will disable OC at
code; otherwise, we will enable OC.
- Since most of USB power control chips are low active for OC, we keep
"over-current-active-high" property unchanging to reduce users effort.
If this property is set, we set OC polarity as high explicitly;
otherwise, we set it as low explicitly.

Cc: stable <stable@xxxxxxxxxxxxxxx>
Cc: Peter Chen <peter.chen@xxxxxxx>
Cc: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
Cc: Matthew Starr <mstarr@xxxxxxxxxxxxx>
Signed-off-by: Peter Chen <peter.chen@xxxxxxx>
---
 drivers/usb/chipidea/ci_hdrc_imx.c |  2 +-
 drivers/usb/chipidea/ci_hdrc_imx.h |  3 ++-
 drivers/usb/chipidea/usbmisc_imx.c | 27 ++++++++++++++++++++++-----
 3 files changed, 25 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 56781c329db0..058468f2de8d 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -140,7 +140,7 @@ static struct imx_usbmisc_data *usbmisc_get_init_data(struct device *dev)
 		data->disable_oc = 1;
 
 	if (of_find_property(np, "over-current-active-high", NULL))
-		data->oc_polarity = 1;
+		data->oc_polarity_high = 1;
 
 	if (of_find_property(np, "external-vbus-divider", NULL))
 		data->evdo = 1;
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.h b/drivers/usb/chipidea/ci_hdrc_imx.h
index fcecab478934..5ea8bb239b38 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.h
+++ b/drivers/usb/chipidea/ci_hdrc_imx.h
@@ -11,7 +11,8 @@ struct imx_usbmisc_data {
 	int index;
 
 	unsigned int disable_oc:1; /* over current detect disabled */
-	unsigned int oc_polarity:1; /* over current polarity if oc enabled */
+	/* over current polarity high if oc enabled */
+	unsigned int oc_polarity_high:1;
 	unsigned int evdo:1; /* set external vbus divider option */
 	unsigned int ulpi:1; /* connected to an ULPI phy */
 	unsigned int hsic:1; /* HSIC controlller */
diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index 43a15a6e86f5..30d1ada952e1 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -135,15 +135,26 @@ static int usbmisc_imx25_init(struct imx_usbmisc_data *data)
 		val = readl(usbmisc->base);
 		val &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PP_BIT);
 		val |= (MX25_EHCI_INTERFACE_DIFF_UNI & MX25_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT;
-		val |= (MX25_OTG_PM_BIT | MX25_OTG_OCPOL_BIT);
+		val |= MX25_OTG_PM_BIT;
+		if (data->oc_polarity_high)
+			/* High active */
+			val |= MX25_OTG_OCPOL_BIT;
+		else
+			val &= ~MX25_OTG_OCPOL_BIT;
+
 		writel(val, usbmisc->base);
 		break;
 	case 1:
 		val = readl(usbmisc->base);
 		val &= ~(MX25_H1_SIC_MASK | MX25_H1_PP_BIT |  MX25_H1_IPPUE_UP_BIT);
 		val |= (MX25_EHCI_INTERFACE_SINGLE_UNI & MX25_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT;
-		val |= (MX25_H1_PM_BIT | MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT |
+		val |= (MX25_H1_PM_BIT | MX25_H1_TLL_BIT |
 			MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT);
+		if (data->oc_polarity_high)
+			/* High active */
+			val |= MX25_H1_OCPOL_BIT;
+		else
+			val &= ~MX25_H1_OCPOL_BIT;
 
 		writel(val, usbmisc->base);
 
@@ -356,12 +367,14 @@ static int usbmisc_imx6q_init(struct imx_usbmisc_data *data)
 	reg = readl(usbmisc->base + data->index * 4);
 	if (data->disable_oc) {
 		reg |= MX6_BM_OVER_CUR_DIS;
-	} else if (data->oc_polarity == 1) {
+	} else if (data->oc_polarity_high == 1) {
 		/* High active */
 		reg &= ~(MX6_BM_OVER_CUR_DIS | MX6_BM_OVER_CUR_POLARITY);
 	} else {
-		reg &= ~(MX6_BM_OVER_CUR_DIS);
+		reg &= ~MX6_BM_OVER_CUR_DIS;
+		reg |= MX6_BM_OVER_CUR_POLARITY;
 	}
+
 	writel(reg, usbmisc->base + data->index * 4);
 
 	/* SoC non-burst setting */
@@ -552,10 +565,14 @@ static int usbmisc_imx7d_init(struct imx_usbmisc_data *data)
 	reg = readl(usbmisc->base);
 	if (data->disable_oc) {
 		reg |= MX6_BM_OVER_CUR_DIS;
-	} else if (data->oc_polarity == 1) {
+	} else if (data->oc_polarity_high == 1) {
 		/* High active */
 		reg &= ~(MX6_BM_OVER_CUR_DIS | MX6_BM_OVER_CUR_POLARITY);
+	} else {
+		reg &= ~MX6_BM_OVER_CUR_DIS;
+		reg |= MX6_BM_OVER_CUR_POLARITY;
 	}
+
 	writel(reg, usbmisc->base);
 
 	reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
-- 
2.14.1





[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux