When the controller supports SS mode, but works as HS mode, the SOFTCONN will not be cleared automatically when clear USB3_EN by default, this cause an issue that can't disconnect from host, so clear SOFTCONN when clear USB3_EN when the class driver want to disable the D+ pullup. Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> --- drivers/usb/mtu3/mtu3_core.c | 2 ++ drivers/usb/mtu3/mtu3_hw_regs.h | 5 +++++ 2 files changed, 7 insertions(+) diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c index b6b20949d63a..4fee200795a5 100644 --- a/drivers/usb/mtu3/mtu3_core.c +++ b/drivers/usb/mtu3/mtu3_core.c @@ -586,6 +586,8 @@ static void mtu3_regs_init(struct mtu3 *mtu) mtu3_clrbits(mbase, U3D_LTSSM_CTRL, SOFT_U3_EXIT_EN); /* automatically build U2 link when U3 detect fail */ mtu3_setbits(mbase, U3D_USB2_TEST_MODE, U2U3_AUTO_SWITCH); + /* auto clear SOFT_CONN when clear USB3_EN if work as HS */ + mtu3_setbits(mbase, U3D_U3U2_SWITCH_CTRL, SOFTCON_CLR_AUTO_EN); } mtu3_set_speed(mtu); diff --git a/drivers/usb/mtu3/mtu3_hw_regs.h b/drivers/usb/mtu3/mtu3_hw_regs.h index d11fcd64c19d..1d65b7476f23 100644 --- a/drivers/usb/mtu3/mtu3_hw_regs.h +++ b/drivers/usb/mtu3/mtu3_hw_regs.h @@ -268,6 +268,8 @@ #define U3D_LTSSM_INTR_ENABLE (SSUSB_USB3_MAC_CSR_BASE + 0x013C) #define U3D_LTSSM_INTR (SSUSB_USB3_MAC_CSR_BASE + 0x0140) +#define U3D_U3U2_SWITCH_CTRL (SSUSB_USB3_MAC_CSR_BASE + 0x0170) + /*---------------- SSUSB_USB3_MAC_CSR FIELD DEFINITION ----------------*/ /* U3D_LTSSM_CTRL */ @@ -302,6 +304,9 @@ #define SS_DISABLE_INTR BIT(1) #define SS_INACTIVE_INTR BIT(0) +/* U3D_U3U2_SWITCH_CTRL */ +#define SOFTCON_CLR_AUTO_EN BIT(0) + /*---------------- SSUSB_USB3_SYS_CSR REGISTER DEFINITION ----------------*/ #define U3D_LINK_UX_INACT_TIMER (SSUSB_USB3_SYS_CSR_BASE + 0x020C) -- 2.19.1
