Hi Hsin-Yi,
On Wed, 2018-11-28 at 14:04 +0800, Hsin-Yi, Wang wrote:
> Originally, when dr_mode is USB_DR_MODE_HOST, it didn't power down device ip,
> so host ip sleep will fail at ssusb_host_disable.
>
> Power down device ip at ssusb_host_setup.
>
> Signed-off-by: Hsin-Yi, Wang <hsinyi@xxxxxxxxxxxx>
> ---
> drivers/usb/mtu3/mtu3_host.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/drivers/usb/mtu3/mtu3_host.c b/drivers/usb/mtu3/mtu3_host.c
> index c871b94f3e6f..d17cf43305db 100644
> --- a/drivers/usb/mtu3/mtu3_host.c
> +++ b/drivers/usb/mtu3/mtu3_host.c
> @@ -192,9 +192,17 @@ int ssusb_host_disable(struct ssusb_mtk *ssusb, bool suspend)
> static void ssusb_host_setup(struct ssusb_mtk *ssusb)
> {
> struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
> + void __iomem *ibase = ssusb->ippc_base;
>
> host_ports_num_get(ssusb);
>
> + /*
> + * device ip is default power-on in fact
The device ip is power-off by default, no need power down it here.
On which platform did you encounter the issue?
> + * power down device ip, otherwise ip-sleep will fail
> + */
> + if (ssusb->dr_mode == USB_DR_MODE_HOST)
> + mtu3_setbits(ibase, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
> +
> /*
> * power on host and power on/enable all ports
> * if support OTG, gadget driver will switch port0 to device mode
