Re: [PATCH v3 2/4] usb: chipidea: imx: add HSIC support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 27.11.18 10:30, PETER CHEN wrote:
> To support imx HSIC, there are some special requirement:
> - The HSIC pad is 1.2v, it may need to supply from external
> - The data/strobe pin needs to be pulled down first, and after
>    host mode is initialized, the strobe pin needs to be pulled up
> - During the USB suspend/resume, special setting is needed
> 
> Signed-off-by: Peter Chen <peter.chen@xxxxxxx>

Tested on i.MX6S with Microchip LAN9730 USB HSIC Ethernet Controller.

Reviewed-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
Tested-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>

> ---
>   drivers/usb/chipidea/ci_hdrc_imx.c | 140 ++++++++++++++++++++++++++++++++-----
>   drivers/usb/chipidea/ci_hdrc_imx.h |   9 ++-
>   drivers/usb/chipidea/usbmisc_imx.c | 140 +++++++++++++++++++++++++++++++++++++
>   3 files changed, 270 insertions(+), 19 deletions(-)
> 
> diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
> index 09b37c0d075d..56781c329db0 100644
> --- a/drivers/usb/chipidea/ci_hdrc_imx.c
> +++ b/drivers/usb/chipidea/ci_hdrc_imx.c
> @@ -14,6 +14,7 @@
>   #include <linux/usb/chipidea.h>
>   #include <linux/usb/of.h>
>   #include <linux/clk.h>
> +#include <linux/pinctrl/consumer.h>
>   
>   #include "ci.h"
>   #include "ci_hdrc_imx.h"
> @@ -85,6 +86,9 @@ struct ci_hdrc_imx_data {
>   	bool supports_runtime_pm;
>   	bool override_phy_control;
>   	bool in_lpm;
> +	struct pinctrl *pinctrl;
> +	struct pinctrl_state *pinctrl_hsic_active;
> +	struct regulator *hsic_pad_regulator;
>   	/* SoC before i.mx6 (except imx23/imx28) needs three clks */
>   	bool need_three_clks;
>   	struct clk *clk_ipg;
> @@ -245,19 +249,49 @@ static void imx_disable_unprepare_clks(struct device *dev)
>   	}
>   }
>   
> +static int ci_hdrc_imx_notify_event(struct ci_hdrc *ci, unsigned int event)
> +{
> +	struct device *dev = ci->dev->parent;
> +	struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
> +	int ret = 0;
> +
> +	switch (event) {
> +	case CI_HDRC_IMX_HSIC_ACTIVE_EVENT:
> +		ret = pinctrl_select_state(data->pinctrl,
> +				data->pinctrl_hsic_active);
> +		if (ret)
> +			dev_err(dev, "hsic_active select failed, err=%d\n",
> +				ret);
> +		break;
> +	case CI_HDRC_IMX_HSIC_SUSPEND_EVENT:
> +		ret = imx_usbmisc_hsic_set_connect(data->usbmisc_data);
> +		if (ret)
> +			dev_err(dev,
> +				"hsic_set_connect failed, err=%d\n", ret);
> +		break;
> +	default:
> +		break;
> +	}
> +
> +	return ret;
> +}
> +
>   static int ci_hdrc_imx_probe(struct platform_device *pdev)
>   {
>   	struct ci_hdrc_imx_data *data;
>   	struct ci_hdrc_platform_data pdata = {
>   		.name		= dev_name(&pdev->dev),
>   		.capoffset	= DEF_CAPOFFSET,
> +		.notify_event	= ci_hdrc_imx_notify_event,
>   	};
>   	int ret;
>   	const struct of_device_id *of_id;
>   	const struct ci_hdrc_imx_platform_flag *imx_platform_flag;
>   	struct device_node *np = pdev->dev.of_node;
> +	struct device *dev = &pdev->dev;
> +	struct pinctrl_state *pinctrl_hsic_idle;
>   
> -	of_id = of_match_device(ci_hdrc_imx_dt_ids, &pdev->dev);
> +	of_id = of_match_device(ci_hdrc_imx_dt_ids, dev);
>   	if (!of_id)
>   		return -ENODEV;
>   
> @@ -268,19 +302,73 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
>   		return -ENOMEM;
>   
>   	platform_set_drvdata(pdev, data);
> -	data->usbmisc_data = usbmisc_get_init_data(&pdev->dev);
> +	data->usbmisc_data = usbmisc_get_init_data(dev);
>   	if (IS_ERR(data->usbmisc_data))
>   		return PTR_ERR(data->usbmisc_data);
>   
> -	ret = imx_get_clks(&pdev->dev);
> +	if (of_usb_get_phy_mode(dev->of_node) == USBPHY_INTERFACE_MODE_HSIC) {
> +		pdata.flags |= CI_HDRC_IMX_IS_HSIC;
> +		data->usbmisc_data->hsic = 1;
> +		data->pinctrl = devm_pinctrl_get(dev);
> +		if (IS_ERR(data->pinctrl)) {
> +			dev_err(dev, "pinctrl get failed, err=%ld\n",
> +					PTR_ERR(data->pinctrl));
> +			return PTR_ERR(data->pinctrl);
> +		}
> +
> +		pinctrl_hsic_idle = pinctrl_lookup_state(data->pinctrl, "idle");
> +		if (IS_ERR(pinctrl_hsic_idle)) {
> +			dev_err(dev,
> +				"pinctrl_hsic_idle lookup failed, err=%ld\n",
> +					PTR_ERR(pinctrl_hsic_idle));
> +			return PTR_ERR(pinctrl_hsic_idle);
> +		}
> +
> +		ret = pinctrl_select_state(data->pinctrl, pinctrl_hsic_idle);
> +		if (ret) {
> +			dev_err(dev, "hsic_idle select failed, err=%d\n", ret);
> +			return ret;
> +		}
> +
> +		data->pinctrl_hsic_active = pinctrl_lookup_state(data->pinctrl,
> +								"active");
> +		if (IS_ERR(data->pinctrl_hsic_active)) {
> +			dev_err(dev,
> +				"pinctrl_hsic_active lookup failed, err=%ld\n",
> +					PTR_ERR(data->pinctrl_hsic_active));
> +			return PTR_ERR(data->pinctrl_hsic_active);
> +		}
> +
> +		data->hsic_pad_regulator = devm_regulator_get(dev, "hsic");
> +		if (PTR_ERR(data->hsic_pad_regulator) == -EPROBE_DEFER) {
> +			return -EPROBE_DEFER;
> +		} else if (PTR_ERR(data->hsic_pad_regulator) == -ENODEV) {
> +			/* no pad regualator is needed */
> +			data->hsic_pad_regulator = NULL;
> +		} else if (IS_ERR(data->hsic_pad_regulator)) {
> +			dev_err(dev, "Get HSIC pad regulator error: %ld\n",
> +					PTR_ERR(data->hsic_pad_regulator));
> +			return PTR_ERR(data->hsic_pad_regulator);
> +		}
> +
> +		if (data->hsic_pad_regulator) {
> +			ret = regulator_enable(data->hsic_pad_regulator);
> +			if (ret) {
> +				dev_err(dev,
> +					"Failed to enable HSIC pad regulator\n");
> +				return ret;
> +			}
> +		}
> +	}
> +	ret = imx_get_clks(dev);
>   	if (ret)
> -		return ret;
> +		goto disable_hsic_regulator;
>   
> -	ret = imx_prepare_enable_clks(&pdev->dev);
> +	ret = imx_prepare_enable_clks(dev);
>   	if (ret)
> -		return ret;
> +		goto disable_hsic_regulator;
>   
> -	data->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "fsl,usbphy", 0);
> +	data->phy = devm_usb_get_phy_by_phandle(dev, "fsl,usbphy", 0);
>   	if (IS_ERR(data->phy)) {
>   		ret = PTR_ERR(data->phy);
>   		/* Return -EINVAL if no usbphy is available */
> @@ -305,40 +393,43 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
>   
>   	ret = imx_usbmisc_init(data->usbmisc_data);
>   	if (ret) {
> -		dev_err(&pdev->dev, "usbmisc init failed, ret=%d\n", ret);
> +		dev_err(dev, "usbmisc init failed, ret=%d\n", ret);
>   		goto err_clk;
>   	}
>   
> -	data->ci_pdev = ci_hdrc_add_device(&pdev->dev,
> +	data->ci_pdev = ci_hdrc_add_device(dev,
>   				pdev->resource, pdev->num_resources,
>   				&pdata);
>   	if (IS_ERR(data->ci_pdev)) {
>   		ret = PTR_ERR(data->ci_pdev);
>   		if (ret != -EPROBE_DEFER)
> -			dev_err(&pdev->dev,
> -				"ci_hdrc_add_device failed, err=%d\n", ret);
> +			dev_err(dev, "ci_hdrc_add_device failed, err=%d\n",
> +					ret);
>   		goto err_clk;
>   	}
>   
>   	ret = imx_usbmisc_init_post(data->usbmisc_data);
>   	if (ret) {
> -		dev_err(&pdev->dev, "usbmisc post failed, ret=%d\n", ret);
> +		dev_err(dev, "usbmisc post failed, ret=%d\n", ret);
>   		goto disable_device;
>   	}
>   
>   	if (data->supports_runtime_pm) {
> -		pm_runtime_set_active(&pdev->dev);
> -		pm_runtime_enable(&pdev->dev);
> +		pm_runtime_set_active(dev);
> +		pm_runtime_enable(dev);
>   	}
>   
> -	device_set_wakeup_capable(&pdev->dev, true);
> +	device_set_wakeup_capable(dev, true);
>   
>   	return 0;
>   
>   disable_device:
>   	ci_hdrc_remove_device(data->ci_pdev);
>   err_clk:
> -	imx_disable_unprepare_clks(&pdev->dev);
> +	imx_disable_unprepare_clks(dev);
> +disable_hsic_regulator:
> +	if (data->hsic_pad_regulator)
> +		ret = regulator_disable(data->hsic_pad_regulator);
>   	return ret;
>   }
>   
> @@ -355,6 +446,8 @@ static int ci_hdrc_imx_remove(struct platform_device *pdev)
>   	if (data->override_phy_control)
>   		usb_phy_shutdown(data->phy);
>   	imx_disable_unprepare_clks(&pdev->dev);
> +	if (data->hsic_pad_regulator)
> +		regulator_disable(data->hsic_pad_regulator);
>   
>   	return 0;
>   }
> @@ -367,9 +460,16 @@ static void ci_hdrc_imx_shutdown(struct platform_device *pdev)
>   static int __maybe_unused imx_controller_suspend(struct device *dev)
>   {
>   	struct ci_hdrc_imx_data *data = dev_get_drvdata(dev);
> +	int ret = 0;
>   
>   	dev_dbg(dev, "at %s\n", __func__);
>   
> +	ret = imx_usbmisc_hsic_set_clk(data->usbmisc_data, false);
> +	if (ret) {
> +		dev_err(dev, "usbmisc hsic_set_clk failed, ret=%d\n", ret);
> +		return ret;
> +	}
> +
>   	imx_disable_unprepare_clks(dev);
>   	data->in_lpm = true;
>   
> @@ -400,8 +500,16 @@ static int __maybe_unused imx_controller_resume(struct device *dev)
>   		goto clk_disable;
>   	}
>   
> +	ret = imx_usbmisc_hsic_set_clk(data->usbmisc_data, true);
> +	if (ret) {
> +		dev_err(dev, "usbmisc hsic_set_clk failed, ret=%d\n", ret);
> +		goto hsic_set_clk_fail;
> +	}
> +
>   	return 0;
>   
> +hsic_set_clk_fail:
> +	imx_usbmisc_set_wakeup(data->usbmisc_data, true);
>   clk_disable:
>   	imx_disable_unprepare_clks(dev);
>   	return ret;
> diff --git a/drivers/usb/chipidea/ci_hdrc_imx.h b/drivers/usb/chipidea/ci_hdrc_imx.h
> index 204275f47573..fcecab478934 100644
> --- a/drivers/usb/chipidea/ci_hdrc_imx.h
> +++ b/drivers/usb/chipidea/ci_hdrc_imx.h
> @@ -14,10 +14,13 @@ struct imx_usbmisc_data {
>   	unsigned int oc_polarity:1; /* over current polarity if oc enabled */
>   	unsigned int evdo:1; /* set external vbus divider option */
>   	unsigned int ulpi:1; /* connected to an ULPI phy */
> +	unsigned int hsic:1; /* HSIC controlller */
>   };
>   
> -int imx_usbmisc_init(struct imx_usbmisc_data *);
> -int imx_usbmisc_init_post(struct imx_usbmisc_data *);
> -int imx_usbmisc_set_wakeup(struct imx_usbmisc_data *, bool);
> +int imx_usbmisc_init(struct imx_usbmisc_data *data);
> +int imx_usbmisc_init_post(struct imx_usbmisc_data *data);
> +int imx_usbmisc_set_wakeup(struct imx_usbmisc_data *data, bool enabled);
> +int imx_usbmisc_hsic_set_connect(struct imx_usbmisc_data *data);
> +int imx_usbmisc_hsic_set_clk(struct imx_usbmisc_data *data, bool on);
>   
>   #endif /* __DRIVER_USB_CHIPIDEA_CI_HDRC_IMX_H */
> diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
> index def80ff547e4..43a15a6e86f5 100644
> --- a/drivers/usb/chipidea/usbmisc_imx.c
> +++ b/drivers/usb/chipidea/usbmisc_imx.c
> @@ -64,10 +64,22 @@
>   #define MX6_BM_OVER_CUR_DIS		BIT(7)
>   #define MX6_BM_OVER_CUR_POLARITY	BIT(8)
>   #define MX6_BM_WAKEUP_ENABLE		BIT(10)
> +#define MX6_BM_UTMI_ON_CLOCK		BIT(13)
>   #define MX6_BM_ID_WAKEUP		BIT(16)
>   #define MX6_BM_VBUS_WAKEUP		BIT(17)
>   #define MX6SX_BM_DPDM_WAKEUP_EN		BIT(29)
>   #define MX6_BM_WAKEUP_INTR		BIT(31)
> +
> +#define MX6_USB_HSIC_CTRL_OFFSET	0x10
> +/* Send resume signal without 480Mhz PHY clock */
> +#define MX6SX_BM_HSIC_AUTO_RESUME	BIT(23)
> +/* set before portsc.suspendM = 1 */
> +#define MX6_BM_HSIC_DEV_CONN		BIT(21)
> +/* HSIC enable */
> +#define MX6_BM_HSIC_EN			BIT(12)
> +/* Force HSIC module 480M clock on, even when in Host is in suspend mode */
> +#define MX6_BM_HSIC_CLK_ON		BIT(11)
> +
>   #define MX6_USB_OTG1_PHY_CTRL		0x18
>   /* For imx6dql, it is host-only controller, for later imx6, it is otg's */
>   #define MX6_USB_OTG2_PHY_CTRL		0x1c
> @@ -94,6 +106,10 @@ struct usbmisc_ops {
>   	int (*post)(struct imx_usbmisc_data *data);
>   	/* It's called when we need to enable/disable usb wakeup */
>   	int (*set_wakeup)(struct imx_usbmisc_data *data, bool enabled);
> +	/* It's called before setting portsc.suspendM */
> +	int (*hsic_set_connect)(struct imx_usbmisc_data *data);
> +	/* It's called during suspend/resume */
> +	int (*hsic_set_clk)(struct imx_usbmisc_data *data, bool enabled);
>   };
>   
>   struct imx_usbmisc {
> @@ -353,6 +369,18 @@ static int usbmisc_imx6q_init(struct imx_usbmisc_data *data)
>   	writel(reg | MX6_BM_NON_BURST_SETTING,
>   			usbmisc->base + data->index * 4);
>   
> +	/* For HSIC controller */
> +	if (data->hsic) {
> +		reg = readl(usbmisc->base + data->index * 4);
> +		writel(reg | MX6_BM_UTMI_ON_CLOCK,
> +			usbmisc->base + data->index * 4);
> +		reg = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET
> +			+ (data->index - 2) * 4);
> +		reg |= MX6_BM_HSIC_EN | MX6_BM_HSIC_CLK_ON;
> +		writel(reg, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET
> +			+ (data->index - 2) * 4);
> +	}
> +
>   	spin_unlock_irqrestore(&usbmisc->lock, flags);
>   
>   	usbmisc_imx6q_set_wakeup(data, false);
> @@ -360,6 +388,79 @@ static int usbmisc_imx6q_init(struct imx_usbmisc_data *data)
>   	return 0;
>   }
>   
> +static int usbmisc_imx6_hsic_get_reg_offset(struct imx_usbmisc_data *data)
> +{
> +	int offset, ret = 0;
> +
> +	if (data->index == 2 || data->index == 3) {
> +		offset = (data->index - 2) * 4;
> +	} else if (data->index == 0) {
> +		/*
> +		 * For SoCs like i.MX7D and later, each USB controller has
> +		 * its own non-core register region. For SoCs before i.MX7D,
> +		 * the first two USB controllers are non-HSIC controllers.
> +		 */
> +		offset = 0;
> +	} else {
> +		dev_err(data->dev, "index is error for usbmisc\n");
> +		ret = -EINVAL;
> +	}
> +
> +	return ret ? ret : offset;
> +}
> +
> +static int usbmisc_imx6_hsic_set_connect(struct imx_usbmisc_data *data)
> +{
> +	unsigned long flags;
> +	u32 val;
> +	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
> +	int offset;
> +
> +	spin_lock_irqsave(&usbmisc->lock, flags);
> +	offset = usbmisc_imx6_hsic_get_reg_offset(data);
> +	if (offset < 0) {
> +		spin_unlock_irqrestore(&usbmisc->lock, flags);
> +		return offset;
> +	}
> +
> +	val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset);
> +	if (!(val & MX6_BM_HSIC_DEV_CONN))
> +		writel(val | MX6_BM_HSIC_DEV_CONN,
> +			usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset);
> +
> +	spin_unlock_irqrestore(&usbmisc->lock, flags);
> +
> +	return 0;
> +}
> +
> +static int usbmisc_imx6_hsic_set_clk(struct imx_usbmisc_data *data, bool on)
> +{
> +	unsigned long flags;
> +	u32 val;
> +	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
> +	int offset;
> +
> +	spin_lock_irqsave(&usbmisc->lock, flags);
> +	offset = usbmisc_imx6_hsic_get_reg_offset(data);
> +	if (offset < 0) {
> +		spin_unlock_irqrestore(&usbmisc->lock, flags);
> +		return offset;
> +	}
> +
> +	val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset);
> +	val |= MX6_BM_HSIC_EN | MX6_BM_HSIC_CLK_ON;
> +	if (on)
> +		val |= MX6_BM_HSIC_CLK_ON;
> +	else
> +		val &= ~MX6_BM_HSIC_CLK_ON;
> +
> +	writel(val, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET + offset);
> +	spin_unlock_irqrestore(&usbmisc->lock, flags);
> +
> +	return 0;
> +}
> +
> +
>   static int usbmisc_imx6sx_init(struct imx_usbmisc_data *data)
>   {
>   	void __iomem *reg = NULL;
> @@ -385,6 +486,13 @@ static int usbmisc_imx6sx_init(struct imx_usbmisc_data *data)
>   		spin_unlock_irqrestore(&usbmisc->lock, flags);
>   	}
>   
> +	/* For HSIC controller */
> +	if (data->hsic) {
> +		val = readl(usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET);
> +		val |= MX6SX_BM_HSIC_AUTO_RESUME;
> +		writel(val, usbmisc->base + MX6_USB_HSIC_CTRL_OFFSET);
> +	}
> +
>   	return 0;
>   }
>   
> @@ -454,6 +562,7 @@ static int usbmisc_imx7d_init(struct imx_usbmisc_data *data)
>   	reg &= ~MX7D_USB_VBUS_WAKEUP_SOURCE_MASK;
>   	writel(reg | MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID,
>   		 usbmisc->base + MX7D_USBNC_USB_CTRL2);
> +
>   	spin_unlock_irqrestore(&usbmisc->lock, flags);
>   
>   	usbmisc_imx7d_set_wakeup(data, false);
> @@ -481,6 +590,8 @@ static const struct usbmisc_ops imx53_usbmisc_ops = {
>   static const struct usbmisc_ops imx6q_usbmisc_ops = {
>   	.set_wakeup = usbmisc_imx6q_set_wakeup,
>   	.init = usbmisc_imx6q_init,
> +	.hsic_set_connect = usbmisc_imx6_hsic_set_connect,
> +	.hsic_set_clk   = usbmisc_imx6_hsic_set_clk,
>   };
>   
>   static const struct usbmisc_ops vf610_usbmisc_ops = {
> @@ -490,6 +601,8 @@ static const struct usbmisc_ops vf610_usbmisc_ops = {
>   static const struct usbmisc_ops imx6sx_usbmisc_ops = {
>   	.set_wakeup = usbmisc_imx6q_set_wakeup,
>   	.init = usbmisc_imx6sx_init,
> +	.hsic_set_connect = usbmisc_imx6_hsic_set_connect,
> +	.hsic_set_clk = usbmisc_imx6_hsic_set_clk,
>   };
>   
>   static const struct usbmisc_ops imx7d_usbmisc_ops = {
> @@ -546,6 +659,33 @@ int imx_usbmisc_set_wakeup(struct imx_usbmisc_data *data, bool enabled)
>   }
>   EXPORT_SYMBOL_GPL(imx_usbmisc_set_wakeup);
>   
> +int imx_usbmisc_hsic_set_connect(struct imx_usbmisc_data *data)
> +{
> +	struct imx_usbmisc *usbmisc;
> +
> +	if (!data)
> +		return 0;
> +
> +	usbmisc = dev_get_drvdata(data->dev);
> +	if (!usbmisc->ops->hsic_set_connect || !data->hsic)
> +		return 0;
> +	return usbmisc->ops->hsic_set_connect(data);
> +}
> +EXPORT_SYMBOL_GPL(imx_usbmisc_hsic_set_connect);
> +
> +int imx_usbmisc_hsic_set_clk(struct imx_usbmisc_data *data, bool on)
> +{
> +	struct imx_usbmisc *usbmisc;
> +
> +	if (!data)
> +		return 0;
> +
> +	usbmisc = dev_get_drvdata(data->dev);
> +	if (!usbmisc->ops->hsic_set_clk || !data->hsic)
> +		return 0;
> +	return usbmisc->ops->hsic_set_clk(data, on);
> +}
> +EXPORT_SYMBOL_GPL(imx_usbmisc_hsic_set_clk);
>   static const struct of_device_id usbmisc_imx_dt_ids[] = {
>   	{
>   		.compatible = "fsl,imx25-usbmisc",
> 




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux