Re: [RFC PATCH v2 01/15] usb:cdns3: add pci to platform driver wrapper.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Pawel,

On 18/11/18 12:08, Pawel Laszczak wrote:
> Patch adds PCI specific glue driver that creates and registers in-system
> cdns-usb3 platform device. Thanks to that we will be able to use
> the cdns-usb3 platform driver for USBSS-DEV controller
> build on PCI board
> 
> Signed-off-by: Pawel Laszczak <pawell@xxxxxxxxxxx>
> ---
>  drivers/usb/Kconfig                |   2 +
>  drivers/usb/Makefile               |   2 +
>  drivers/usb/cdns3/Kconfig          |  24 +++++
>  drivers/usb/cdns3/Makefile         |   3 +
>  drivers/usb/cdns3/cdns3-pci-wrap.c | 157 +++++++++++++++++++++++++++++
>  5 files changed, 188 insertions(+)
>  create mode 100644 drivers/usb/cdns3/Kconfig
>  create mode 100644 drivers/usb/cdns3/Makefile
>  create mode 100644 drivers/usb/cdns3/cdns3-pci-wrap.c
> 
> diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
> index 987fc5ba6321..5f9334019d04 100644
> --- a/drivers/usb/Kconfig
> +++ b/drivers/usb/Kconfig
> @@ -112,6 +112,8 @@ source "drivers/usb/usbip/Kconfig"
>  
>  endif
>  
> +source "drivers/usb/cdns3/Kconfig"
> +
>  source "drivers/usb/mtu3/Kconfig"
>  
>  source "drivers/usb/musb/Kconfig"
> diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
> index 7d1b8c82b208..82093a60ea2c 100644
> --- a/drivers/usb/Makefile
> +++ b/drivers/usb/Makefile
> @@ -8,6 +8,8 @@
>  obj-$(CONFIG_USB)		+= core/
>  obj-$(CONFIG_USB_SUPPORT)	+= phy/
>  
> +obj-$(CONFIG_USB_CDNS3)		+= cdns3/
> +
>  obj-$(CONFIG_USB_DWC3)		+= dwc3/
>  obj-$(CONFIG_USB_DWC2)		+= dwc2/
>  obj-$(CONFIG_USB_ISP1760)	+= isp1760/
> diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig
> new file mode 100644
> index 000000000000..eb22a8692991
> --- /dev/null
> +++ b/drivers/usb/cdns3/Kconfig
> @@ -0,0 +1,24 @@
> +config USB_CDNS3
> +	tristate "Cadence USB3 Dual-Role Controller"
> +	depends on USB_SUPPORT && (USB || USB_GADGET) && HAS_DMA
> +	help
> +	  Say Y here if your system has a cadence USB3 dual-role controller.
> +	  It supports: dual-role switch, Host-only, and Peripheral-only.
> +
> +	  If you choose to build this driver is a dynamically linked
> +	  module, the module will be called cdns3.ko.
> +
> +if USB_CDNS3
> +
> +config USB_CDNS3_PCI_WRAP
> +	tristate "PCIe-based Platforms"

"Cadence USB3 support on PCIe-based platforms"?

> +	depends on USB_PCI && ACPI
> +	default USB_CDNS3
> +	help
> +	  If you're using the USBSS Core IP with a PCIe, please say
> +	  'Y' or 'M' here.
> +
> +	  If you choose to build this driver as module it will
> +	  be dynamically linked and module will be called cdns3-pci.ko
> +
> +endif
> diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile
> new file mode 100644
> index 000000000000..dcdd62003c6a
> --- /dev/null
> +++ b/drivers/usb/cdns3/Makefile
> @@ -0,0 +1,3 @@
> +obj-$(CONFIG_USB_CDNS3_PCI_WRAP)	+= cdns3-pci.o
> +
> +cdns3-pci-y		 		:= cdns3-pci-wrap.o
> diff --git a/drivers/usb/cdns3/cdns3-pci-wrap.c b/drivers/usb/cdns3/cdns3-pci-wrap.c
> new file mode 100644
> index 000000000000..d0a15cc0b738
> --- /dev/null
> +++ b/drivers/usb/cdns3/cdns3-pci-wrap.c
> @@ -0,0 +1,157 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Cadence USBSS PCI Glue driver
> + *
> + * Copyright (C) 2018 Cadence.
> + *
> + * Author: Pawel Laszczak <pawell@xxxxxxxxxxx>
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/slab.h>
> +
> +struct cdns3_wrap {
> +	struct platform_device *plat_dev;
> +	struct pci_dev *hg_dev;
> +	struct resource dev_res[4];
> +};
> +
> +struct cdns3_wrap wrap;
> +
> +#define RES_IRQ_ID		0
> +#define RES_HOST_ID		1
> +#define RES_DEV_ID		2
> +#define RES_DRD_ID		3
> +
> +#define PCI_BAR_HOST		0
> +#define PCI_BAR_DEV		2
> +#define PCI_BAR_OTG		4
> +
> +#define PCI_DEV_FN_HOST_DEVICE	0
> +#define PCI_DEV_FN_OTG		1
> +
> +#define PCI_DRIVER_NAME		"cdns3-pci-usbss"
> +#define PLAT_DRIVER_NAME	"cdns-usb3"
> +
> +#define CDNS_VENDOR_ID 0x17cd
> +#define CDNS_DEVICE_ID 0x0100
> +
> +/**
> + * cdns3_pci_probe - Probe function for Cadence USB wrapper driver
> + * @pdev: platform device object
> + * @id: pci device id
> + *
> + * Returns 0 on success otherwise negative errno
> + */
> +static int cdns3_pci_probe(struct pci_dev *pdev,
> +			   const struct pci_device_id *id)
> +{
> +	struct platform_device_info plat_info;
> +	struct cdns3_wrap *wrap;
> +	struct resource *res;
> +	int err;
> +
> +	/*
> +	 * for GADGET/HOST PCI (devfn) function number is 0,
> +	 * for OTG PCI (devfn) function number is 1
> +	 */
> +	if (!id || pdev->devfn != PCI_DEV_FN_HOST_DEVICE)
> +		return -EINVAL;
> +
> +	err = pcim_enable_device(pdev);
> +	if (err) {
> +		dev_err(&pdev->dev, "Enabling PCI device has failed %d\n", err);
> +		return err;
> +	}
> +
> +	pci_set_master(pdev);
> +	wrap = devm_kzalloc(&pdev->dev, sizeof(*wrap), GFP_KERNEL);
> +	if (!wrap) {
> +		dev_err(&pdev->dev, "Failed to load PCI module\n");

"Failed to allocate memory" ?

Rest of patch looks good to me.

> +		return -ENOMEM;
> +	}
> +
> +	/* function 0: host(BAR_0) + device(BAR_1) + otg(BAR_2)). */
> +	memset(wrap->dev_res, 0x00,
> +	       sizeof(struct resource) * ARRAY_SIZE(wrap->dev_res));
> +	dev_dbg(&pdev->dev, "Initialize Device resources\n");
> +	res = wrap->dev_res;
> +
> +	res[RES_DEV_ID].start = pci_resource_start(pdev, PCI_BAR_DEV);
> +	res[RES_DEV_ID].end =   pci_resource_end(pdev, PCI_BAR_DEV);
> +	res[RES_DEV_ID].name = "cdns3-dev-regs";
> +	res[RES_DEV_ID].flags = IORESOURCE_MEM;
> +	dev_dbg(&pdev->dev, "USBSS-DEV physical base addr: %pa\n",
> +		&res[RES_DEV_ID].start);
> +
> +	res[RES_HOST_ID].start = pci_resource_start(pdev, PCI_BAR_HOST);
> +	res[RES_HOST_ID].end = pci_resource_end(pdev, PCI_BAR_HOST);
> +	res[RES_HOST_ID].name = "cdns3-xhci-regs";
> +	res[RES_HOST_ID].flags = IORESOURCE_MEM;
> +	dev_dbg(&pdev->dev, "USBSS-XHCI physical base addr: %pa\n",
> +		&res[RES_HOST_ID].start);
> +
> +	res[RES_DRD_ID].start = pci_resource_start(pdev, PCI_BAR_OTG);
> +	res[RES_DRD_ID].end =   pci_resource_end(pdev, PCI_BAR_OTG);
> +	res[RES_DRD_ID].name = "cdns3-otg";
> +	res[RES_DRD_ID].flags = IORESOURCE_MEM;
> +	dev_dbg(&pdev->dev, "USBSS-DRD physical base addr: %pa\n",
> +		&res[RES_DRD_ID].start);
> +
> +	/* Interrupt common for both device and XHCI */
> +	wrap->dev_res[RES_IRQ_ID].start = pdev->irq;
> +	wrap->dev_res[RES_IRQ_ID].name = "cdns3-irq";
> +	wrap->dev_res[RES_IRQ_ID].flags = IORESOURCE_IRQ;
> +
> +	/* set up platform device info */
> +	memset(&plat_info, 0, sizeof(plat_info));
> +	plat_info.parent = &pdev->dev;
> +	plat_info.fwnode = pdev->dev.fwnode;
> +	plat_info.name = PLAT_DRIVER_NAME;
> +	plat_info.id = pdev->devfn;
> +	plat_info.res = wrap->dev_res;
> +	plat_info.num_res = ARRAY_SIZE(wrap->dev_res);
> +	plat_info.dma_mask = pdev->dma_mask;
> +
> +	/* register platform device */
> +	wrap->plat_dev = platform_device_register_full(&plat_info);
> +	if (IS_ERR(wrap->plat_dev)) {
> +		err = PTR_ERR(wrap->plat_dev);
> +		return err;
> +	}
> +
> +	pci_set_drvdata(pdev, wrap);
> +
> +	return err;
> +}
> +
> +void cdns3_pci_remove(struct pci_dev *pdev)
> +{
> +	struct cdns3_wrap *wrap = (struct cdns3_wrap *)pci_get_drvdata(pdev);
> +
> +	platform_device_unregister(wrap->plat_dev);
> +}
> +
> +static const struct pci_device_id cdns3_pci_ids[] = {
> +	{ PCI_DEVICE(CDNS_VENDOR_ID, CDNS_DEVICE_ID), },
> +	{ 0, }
> +};
> +
> +static struct pci_driver cdns3_pci_driver = {
> +	.name = PCI_DRIVER_NAME,
> +	.id_table = cdns3_pci_ids,
> +	.probe = cdns3_pci_probe,
> +	.remove = cdns3_pci_remove,
> +};
> +
> +module_pci_driver(cdns3_pci_driver);
> +MODULE_DEVICE_TABLE(pci, cdns3_pci_ids);
> +
> +MODULE_AUTHOR("Pawel Laszczak <pawell@xxxxxxxxxxx>");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("Cadence USBSS PCI wrapperr");
> +
> 

cheers,
-roger
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux