[PATCH 0/5] Reset Intel BT controller if it gets stuck

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



There can be error conditions within Intel BT firmware that can cause it
to get stuck, with the only way out being toggle the reset pin to the
device. (I do not have the details about the issues that lead to such
conditions, Intel folks copied here can elaborate if needed). Thus, this
is an effor to be able to toggle the reset line from the driver if it
detects such a situation. It makes few enhancements to the common
framework which I think may be useful for other unrelated problems.

Dmitry Torokhov (2):
  usb: split code locating ACPI companion into port and device
  usb: assign ACPI companions for embedded USB devices
  (This basically allows ACPI nodes to be attached to the USB devices,
   thus useful for any onboard / embedded USB devices that wants to get
   some info from the ACPI).

Rajat Jain (3):
  Bluetooth: Reset Bluetooth chip after multiple command timeouts
  Bluetooth: btusb: Collect the common Intel assignments together
  Bluetooth: btusb: Use the hw_reset method to allow resetting the BT
    chip

 drivers/bluetooth/btusb.c        |  63 +++++++++---
 drivers/usb/core/usb-acpi.c      | 163 +++++++++++++++++++------------
 include/net/bluetooth/hci.h      |   8 ++
 include/net/bluetooth/hci_core.h |   2 +
 net/bluetooth/hci_core.c         |  15 ++-
 5 files changed, 171 insertions(+), 80 deletions(-)

-- 
2.19.1.1215.g8438c0b245-goog




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux