[PATCH v2 net-next 05/21] net: usb: aqc111: Introduce PHY access

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Dmitry Bezrukov <dmitry.bezrukov@xxxxxxxxxxxx>

Add helpers to write 32bit values.
Implement PHY power up/down sequences.
AQC111, depending on FW used, may has PHY being controlled either
directly (dpa = 1) or via vendor command interface (dpa = 0).
Drivers supports both themes.
We determine this from firmware versioning agreement.

Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@xxxxxxxxxxxx>
Signed-off-by: Igor Russkikh <igor.russkikh@xxxxxxxxxxxx>
---
 drivers/net/usb/aqc111.c | 109 +++++++++++++++++++++++++++++++++++++++++++++++
 drivers/net/usb/aqc111.h |  44 +++++++++++++++++++
 2 files changed, 153 insertions(+)

diff --git a/drivers/net/usb/aqc111.c b/drivers/net/usb/aqc111.c
index b08af34a5417..c91acb7b7c4e 100644
--- a/drivers/net/usb/aqc111.c
+++ b/drivers/net/usb/aqc111.c
@@ -137,14 +137,62 @@ static int aqc111_write16_cmd(struct usbnet *dev, u8 cmd, u16 value,
 	return aqc111_write_cmd(dev, cmd, value, index, sizeof(tmp), &tmp);
 }
 
+static int aqc111_write32_cmd_nopm(struct usbnet *dev, u8 cmd, u16 value,
+				   u16 index, u32 *data)
+{
+	u32 tmp = *data;
+
+	cpu_to_le32s(&tmp);
+
+	return aqc111_write_cmd_nopm(dev, cmd, value, index, sizeof(tmp), &tmp);
+}
+
+static int aqc111_write32_cmd(struct usbnet *dev, u8 cmd, u16 value,
+			      u16 index, u32 *data)
+{
+	u32 tmp = *data;
+
+	cpu_to_le32s(&tmp);
+
+	return aqc111_write_cmd(dev, cmd, value, index, sizeof(tmp), &tmp);
+}
+
+static int aqc111_mdio_read(struct usbnet *dev, u16 value, u16 index, u16 *data)
+{
+	return aqc111_read16_cmd(dev, AQ_PHY_CMD, value, index, data);
+}
+
+static int aqc111_mdio_write(struct usbnet *dev, u16 value,
+			     u16 index, u16 *data)
+{
+	return aqc111_write16_cmd(dev, AQ_PHY_CMD, value, index, data);
+}
+
 static const struct net_device_ops aqc111_netdev_ops = {
 	.ndo_open		= usbnet_open,
 	.ndo_stop		= usbnet_stop,
 };
 
+static void aqc111_read_fw_version(struct usbnet *dev,
+				   struct aqc111_data *aqc111_data)
+{
+	aqc111_read_cmd(dev, AQ_ACCESS_MAC, AQ_FW_VER_MAJOR,
+			1, 1, &aqc111_data->fw_ver.major);
+	aqc111_read_cmd(dev, AQ_ACCESS_MAC, AQ_FW_VER_MINOR,
+			1, 1, &aqc111_data->fw_ver.minor);
+	aqc111_read_cmd(dev, AQ_ACCESS_MAC, AQ_FW_VER_REV,
+			1, 1, &aqc111_data->fw_ver.rev);
+
+	if (aqc111_data->fw_ver.major & 0x80)
+		aqc111_data->fw_ver.major &= ~0x80;
+	else
+		aqc111_data->dpa = 1;
+}
+
 static int aqc111_bind(struct usbnet *dev, struct usb_interface *intf)
 {
 	struct usb_device *udev = interface_to_usbdev(intf);
+	struct aqc111_data *aqc111_data;
 	int ret;
 
 	/* Check if vendor configuration */
@@ -161,14 +209,25 @@ static int aqc111_bind(struct usbnet *dev, struct usb_interface *intf)
 		return ret;
 	}
 
+	aqc111_data = kzalloc(sizeof(*aqc111_data), GFP_KERNEL);
+	if (!aqc111_data)
+		return -ENOMEM;
+
+	/* store aqc111_data pointer in device data field */
+	dev->driver_priv = aqc111_data;
+
 	dev->net->netdev_ops = &aqc111_netdev_ops;
 
+	aqc111_read_fw_version(dev, aqc111_data);
+
 	return 0;
 }
 
 static void aqc111_unbind(struct usbnet *dev, struct usb_interface *intf)
 {
+	struct aqc111_data *aqc111_data = dev->driver_priv;
 	u16 reg16;
+	u8 reg8;
 
 	/* Force bz */
 	reg16 = SFR_PHYPWR_RSTCTL_BZ;
@@ -177,12 +236,50 @@ static void aqc111_unbind(struct usbnet *dev, struct usb_interface *intf)
 	reg16 = 0;
 	aqc111_write16_cmd_nopm(dev, AQ_ACCESS_MAC, SFR_PHYPWR_RSTCTL,
 				2, &reg16);
+
+	/* Power down ethernet PHY */
+	if (aqc111_data->dpa) {
+		reg8 = 0x00;
+		aqc111_write_cmd_nopm(dev, AQ_PHY_POWER, 0,
+				      0, 1, &reg8);
+	} else {
+		aqc111_data->phy_cfg |= AQ_LOW_POWER;
+		aqc111_data->phy_cfg &= ~AQ_PHY_POWER_EN;
+		aqc111_write32_cmd_nopm(dev, AQ_PHY_OPS, 0, 0,
+					&aqc111_data->phy_cfg);
+	}
+
+	kfree(aqc111_data);
 }
 
 static int aqc111_reset(struct usbnet *dev)
 {
+	struct aqc111_data *aqc111_data = dev->driver_priv;
+	u16 reg16 = 0;
 	u8 reg8 = 0;
 
+	/* Power up ethernet PHY */
+	aqc111_data->phy_cfg = AQ_PHY_POWER_EN;
+	if (aqc111_data->dpa) {
+		aqc111_read_cmd(dev, AQ_PHY_POWER, 0, 0, 1, &reg8);
+		if (reg8 == 0x00) {
+			reg8 = 0x02;
+			aqc111_write_cmd(dev, AQ_PHY_POWER, 0, 0, 1, &reg8);
+			msleep(200);
+		}
+
+		aqc111_mdio_read(dev, AQ_GLB_STD_CTRL_REG, AQ_PHY_GLOBAL_ADDR,
+				 &reg16);
+		if (reg16 & AQ_PHY_LOW_POWER_MODE) {
+			reg16 &= ~AQ_PHY_LOW_POWER_MODE;
+			aqc111_mdio_write(dev, AQ_GLB_STD_CTRL_REG,
+					  AQ_PHY_GLOBAL_ADDR, &reg16);
+		}
+	} else {
+		aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0,
+				   &aqc111_data->phy_cfg);
+	}
+
 	reg8 = 0xFF;
 	aqc111_write_cmd(dev, AQ_ACCESS_MAC, SFR_BM_INT_MASK, 1, 1, &reg8);
 
@@ -200,6 +297,7 @@ static int aqc111_reset(struct usbnet *dev)
 
 static int aqc111_stop(struct usbnet *dev)
 {
+	struct aqc111_data *aqc111_data = dev->driver_priv;
 	u16 reg16 = 0;
 
 	aqc111_read16_cmd(dev, AQ_ACCESS_MAC, SFR_MEDIUM_STATUS_MODE,
@@ -210,6 +308,17 @@ static int aqc111_stop(struct usbnet *dev)
 	reg16 = 0;
 	aqc111_write16_cmd(dev, AQ_ACCESS_MAC, SFR_RX_CTL, 2, &reg16);
 
+	/* Put PHY to low power*/
+	if (aqc111_data->dpa) {
+		reg16 = AQ_PHY_LOW_POWER_MODE;
+		aqc111_mdio_write(dev, AQ_GLB_STD_CTRL_REG, AQ_PHY_GLOBAL_ADDR,
+				  &reg16);
+	} else {
+		aqc111_data->phy_cfg |= AQ_LOW_POWER;
+		aqc111_write32_cmd(dev, AQ_PHY_OPS, 0, 0,
+				   &aqc111_data->phy_cfg);
+	}
+
 	return 0;
 }
 
diff --git a/drivers/net/usb/aqc111.h b/drivers/net/usb/aqc111.h
index a252ccd78559..ac0bbeabf563 100644
--- a/drivers/net/usb/aqc111.h
+++ b/drivers/net/usb/aqc111.h
@@ -12,6 +12,17 @@
 
 #define AQ_ACCESS_MAC			0x01
 #define AQ_PHY_POWER			0x31
+#define AQ_PHY_CMD			0x32
+#define AQ_PHY_OPS			0x61
+
+#define AQC111_PHY_ID			0x00
+#define AQ_PHY_ADDR(mmd)		((AQC111_PHY_ID << 8) | mmd)
+
+#define AQ_PHY_GLOBAL_MMD		0x1E
+#define AQ_PHY_GLOBAL_ADDR		AQ_PHY_ADDR(AQ_PHY_GLOBAL_MMD)
+
+#define AQ_GLB_STD_CTRL_REG		0x0000
+	#define AQ_PHY_LOW_POWER_MODE		0x0800
 
 #define AQ_USB_PHY_SET_TIMEOUT		10000
 #define AQ_USB_SET_TIMEOUT		4000
@@ -102,6 +113,39 @@
 	#define SFR_BULK_OUT_FLUSH_EN		0x01
 	#define SFR_BULK_OUT_EFF_EN		0x02
 
+#define AQ_FW_VER_MAJOR			0xDA
+#define AQ_FW_VER_MINOR			0xDB
+#define AQ_FW_VER_REV			0xDC
+
+/*PHY_OPS**********************************************************************/
+
+#define AQ_ADV_100M	BIT(0)
+#define AQ_ADV_1G	BIT(1)
+#define AQ_ADV_2G5	BIT(2)
+#define AQ_ADV_5G	BIT(3)
+
+#define AQ_PAUSE	BIT(16)
+#define AQ_ASYM_PAUSE	BIT(17)
+#define AQ_LOW_POWER	BIT(18)
+#define AQ_PHY_POWER_EN	BIT(19)
+#define AQ_WOL		BIT(20)
+#define AQ_DOWNSHIFT	BIT(21)
+
+#define AQ_DSH_RETRIES_SHIFT	0x18
+#define AQ_DSH_RETRIES_MASK	0xF000000
+
+/******************************************************************************/
+
+struct aqc111_data {
+	struct {
+		u8 major;
+		u8 minor;
+		u8 rev;
+	} fw_ver;
+	u8 dpa; /*direct PHY access*/
+	u32 phy_cfg;
+};
+
 static struct {
 	unsigned char ctrl;
 	unsigned char timer_l;
-- 
2.7.4





[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux