From: Aaron Ma <aaron.ma@xxxxxxxxxxxxx>
This definition is used by msecs_to_jiffies in milliseconds.
According to the comments, max rexit timeout should be 20ms.
Align with the comments to properly calculate the delay.
Verified on Sunrise Point-LP and Cannon Lake.
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Aaron Ma <aaron.ma@xxxxxxxxxxxxx>
Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
---
drivers/usb/host/xhci-hub.c | 4 ++--
drivers/usb/host/xhci.h | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 60e4ac7..da98a11 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -921,7 +921,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
time_left = wait_for_completion_timeout(
&bus_state->rexit_done[wIndex],
msecs_to_jiffies(
- XHCI_MAX_REXIT_TIMEOUT));
+ XHCI_MAX_REXIT_TIMEOUT_MS));
spin_lock_irqsave(&xhci->lock, flags);
if (time_left) {
@@ -935,7 +935,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
} else {
int port_status = readl(port->addr);
xhci_warn(xhci, "Port resume took longer than %i msec, port status = 0x%x\n",
- XHCI_MAX_REXIT_TIMEOUT,
+ XHCI_MAX_REXIT_TIMEOUT_MS,
port_status);
status |= USB_PORT_STAT_SUSPEND;
clear_bit(wIndex, &bus_state->rexit_ports);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index bf0b369..5f0c4f1 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1680,7 +1680,7 @@ struct xhci_bus_state {
* It can take up to 20 ms to transition from RExit to U0 on the
* Intel Lynx Point LP xHCI host.
*/
-#define XHCI_MAX_REXIT_TIMEOUT (20 * 1000)
+#define XHCI_MAX_REXIT_TIMEOUT_MS 20
static inline unsigned int hcd_index(struct usb_hcd *hcd)
{
--
2.7.4
