>On 03/11/18 19:51, Pawel Laszczak wrote:
>> Patch adds core.c and core.h file that implements initialization
>> of platform driver and adds function responsible for selecting,
>> switching and running appropriate Device/Host mode.
>>
>> Patch also adds gadget.c, host.c, gadget-export.h, host-export.h.
>> These files contains templates functions used during initialization.
>> The implementation will be added in next patches.
>>
>> Signed-off-by: Pawel Laszczak <pawell@xxxxxxxxxxx>
>> ---
>> drivers/usb/cdns3/Kconfig | 20 ++
>> drivers/usb/cdns3/Makefile | 4 +
>> drivers/usb/cdns3/core.c | 373 ++++++++++++++++++++++++++++++
>> drivers/usb/cdns3/core.h | 88 +++++++
>> drivers/usb/cdns3/gadget-export.h | 27 +++
>> drivers/usb/cdns3/gadget.c | 36 +++
>> drivers/usb/cdns3/host-export.h | 30 +++
>> drivers/usb/cdns3/host.c | 28 +++
>> 8 files changed, 606 insertions(+)
>> create mode 100644 drivers/usb/cdns3/core.c
>> create mode 100644 drivers/usb/cdns3/core.h
>> create mode 100644 drivers/usb/cdns3/gadget-export.h
>> create mode 100644 drivers/usb/cdns3/gadget.c
>> create mode 100644 drivers/usb/cdns3/host-export.h
>> create mode 100644 drivers/usb/cdns3/host.c
>>
>> diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig
>> index 888458372adb..5f88a4932e58 100644
>> --- a/drivers/usb/cdns3/Kconfig
>> +++ b/drivers/usb/cdns3/Kconfig
>> @@ -10,6 +10,26 @@ config USB_CDNS3
>>
>> if USB_CDNS3
>>
>> +config USB_CDNS3_GADGET
>> + bool "Cadence USB3 device controller"
>> + depends on USB_GADGET
>> + help
>> + Say Y here to enable device controller functionality of the
>> + cadence USBSS-DEV driver.
>> +
>> + This controller support FF, HS and SS mode. It doeasn't support
>> + LS and SSP mode
>> +
>> +config USB_CDNS3_HOST
>> + bool "Cadence USB3 host controller"
>> + depends on USB_XHCI_HCD
>> + help
>> + Say Y here to enable host controller functionality of the
>> + cadence driver.
>> +
>> + Host controller is compliance with XHCI so it will use
>> + standard XHCI driver.
>> +
>
>Is it better to split this patch into 3 parts?
>1) host support
>2) gadget support
>3) DRD support (along with patch 4)
Currently we have:
0003-usb-cdns3-Driver-initialization-code.patch - generic initialization common code.
I agree that some fragment could be moved to next free patches. It could improve understanding of code.
0004-usb-cdns3-Added-DRD-support.patch - it's short file so contains initialization and other related to DRD function.
0005-usb-cdns3-Added-Wrapper-to-XCHI-driver.patch - host support - quite short patch
0006-usb-cdns3-Initialization-code-for-Device-side - device initialization
>
>> config USB_CDNS3_PCI_WRAP
>> tristate "PCIe-based Platforms"
>> depends on USB_PCI && ACPI
>> diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile
>> index dcdd62003c6a..083676c7748f 100644
>> --- a/drivers/usb/cdns3/Makefile
>> +++ b/drivers/usb/cdns3/Makefile
>> @@ -1,3 +1,7 @@
>> +obj-$(CONFIG_USB_CDNS3) += cdns3.o
>> obj-$(CONFIG_USB_CDNS3_PCI_WRAP) += cdns3-pci.o
>>
>> +cdns3-y := core.o
>> +cdns3-$(CONFIG_USB_CDNS3_GADGET) += gadget.o
>> +cdns3-$(CONFIG_USB_CDNS3_HOST) += host.o
>> cdns3-pci-y := cdns3-pci-wrap.o
>> diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c
>> new file mode 100644
>> index 000000000000..727136235957
>> --- /dev/null
>> +++ b/drivers/usb/cdns3/core.c
>> @@ -0,0 +1,373 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Cadence USBSS DRD Driver.
>> + *
>> + * Copyright (C) 2018 Cadence.
>> + *
>> + * Author: Peter Chen <peter.chen@xxxxxxx>
>> + * Pawel Laszczak <pawell@xxxxxxxxxxx>
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/kernel.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/io.h>
>> +
>> +#include "gadget.h"
>> +#include "core.h"
>> +#include "host-export.h"
>> +#include "gadget-export.h"
>> +
>> +static inline struct cdns3_role_driver *cdns3_role(struct cdns3 *cdns)
>
>how about naming this to cnds3_get_current_role_driver() ?
It's better. I've changed it.
>
>> +{
>> + WARN_ON(cdns->role >= CDNS3_ROLE_END || !cdns->roles[cdns->role]);
>> + return cdns->roles[cdns->role];
>> +}
>> +
>> +static inline int cdns3_role_start(struct cdns3 *cdns, enum cdns3_roles role)
>> +{
>> + int ret;
>> +
>> + if (role >= CDNS3_ROLE_END)
>> + return 0;
>> +
>> + if (!cdns->roles[role])
>> + return -ENXIO;
>> +
>> + mutex_lock(&cdns->mutex);
>> + cdns->role = role;
>
>You are changing the role here. Shouldn't it just start whatever role is already in cdns->role?
>And you have a cnds3_set_role() function to set role.
The function cdns3_set_role currently do nothing.
A little explanation. The main author of this file is Peter Chan.
We use the same controller, but we have different platforms. I adopt this file to my
platform. I tried to keep the concept of his solution and remove only platform specific codes.
I assume this approach allows him easily to re-use this code in the feature.
In cdns3_set_role he makes some platform specific code that allow him to switch between
Host and device. I do not need it In the feature this function probably will call some platform
specific function.
Currently this function is not used so I will remove it.
>> + ret = cdns->roles[role]->start(cdns);
>> + mutex_unlock(&cdns->mutex);
>> + return ret;
>> +}
>> +
>> +static inline void cdns3_role_stop(struct cdns3 *cdns)
>> +{
>> + enum cdns3_roles role = cdns->role;
>> +
>> + if (role == CDNS3_ROLE_END)
>> + return;
>> +
>> + mutex_lock(&cdns->mutex);
>> + cdns->roles[role]->stop(cdns);
>> + cdns->role = CDNS3_ROLE_END;
>> + mutex_unlock(&cdns->mutex);
>> +}
>> +
>> +static void cdns3_set_role(struct cdns3 *cdns, enum cdns3_roles role)
>> +{
>> + if (role == CDNS3_ROLE_END)
>> + return;
>> +
>> + if (role == CDNS3_ROLE_HOST) {
>> + //TODO: set host role
>> + } else { /* gadget mode */
>> + //TODO: set device role
>> + }
>> +}
>> +
>> +static enum cdns3_roles cdns3_get_role(struct cdns3 *cdns)
>> +{
>> + if (cdns->roles[CDNS3_ROLE_HOST] && cdns->roles[CDNS3_ROLE_GADGET]) {
>> + //TODO: implements selecting device/host mode
>> + return CDNS3_ROLE_HOST;
>> + }
>> + return cdns->roles[CDNS3_ROLE_HOST]
>> + ? CDNS3_ROLE_HOST
>> + : CDNS3_ROLE_GADGET;
>> +}
>> +
>> +/**
>> + * cdns3_core_init_role - initialize role of operation
>> + * @cdns: Pointer to cdns3 structure
>> + *
>> + * Returns 0 on success otherwise negative errno
>> + */
>> +static int cdns3_core_init_role(struct cdns3 *cdns)
>> +{
>> + struct device *dev = cdns->dev;
>> + enum usb_dr_mode dr_mode;
>> +
>> + dr_mode = usb_get_dr_mode(dev);
>> + cdns->role = CDNS3_ROLE_END;
>> +
>> + if (dr_mode == USB_DR_MODE_UNKNOWN) {
>> + if (IS_ENABLED(CONFIG_USB_CDNS3_HOST) &&
>> + IS_ENABLED(CONFIG_USB_CDNS3_GADGET))
>> + dr_mode = USB_DR_MODE_OTG;
>> + else if (IS_ENABLED(CONFIG_USB_CDNS3_HOST))
>> + dr_mode = USB_DR_MODE_HOST;
>> + else if (IS_ENABLED(CONFIG_USB_CDNS3_DEVICE))
>> + dr_mode = USB_DR_MODE_PERIPHERAL;
>> + }
>> +
>> + if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
>> + if (cdns3_host_init(cdns))
>> + dev_info(dev, "doesn't support host\n");
>> + }
>> +
>> + if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) {
>> + if (cdns3_gadget_init(cdns))
>> + dev_info(dev, "doesn't support gadget\n");
>> + }
>> +
>> + if (!cdns->roles[CDNS3_ROLE_HOST] && !cdns->roles[CDNS3_ROLE_GADGET]) {
>> + dev_err(dev, "no supported roles\n");
>> + return -ENODEV;
>> + }
>> +
>> + cdns->dr_mode = dr_mode;
>> + return 0;
>> +}
>> +
>> +/**
>> + * cdns3_irq - interrupt handler for cdns3 core device
>> + *
>> + * @irq: irq number for cdns3 core device
>> + * @data: structure of cdns3
>> + *
>> + * Returns IRQ_HANDLED or IRQ_NONE
>> + */
>> +static irqreturn_t cdns3_irq(int irq, void *data)
>> +{
>> + struct cdns3 *cdns = data;
>> + irqreturn_t ret = IRQ_NONE;
>> +
>> + if (cdns->in_lpm) {
>> + disable_irq_nosync(cdns->irq);
>> + cdns->wakeup_int = true;
>> + pm_runtime_get(cdns->dev);
>
>where is the balancing pm_runtime_put() for this?
I will remove this fragment.
It will be implemented later in pm runtime functions.
>
>> + return IRQ_HANDLED;
>> + }
>> +
>> + /* Handle device/host interrupt */
>> + if (cdns->role != CDNS3_ROLE_END)
>> + ret = cdns3_role(cdns)->irq(cdns);
>> +
>> + return ret;
>> +}
>> +
>> +static void cdns3_remove_roles(struct cdns3 *cdns)
>> +{
>> + cdns3_gadget_remove(cdns);
>> + cdns3_host_remove(cdns);
>> +}
>> +
>> +static int cdns3_do_role_switch(struct cdns3 *cdns, enum cdns3_roles role)
>> +{
>> + enum cdns3_roles current_role;
>> + int ret = 0;
>> +
>> + if (cdns->role == role)
>> + return 0;
>> +
>> + pm_runtime_get_sync(cdns->dev);
>> + current_role = cdns->role;
>> + cdns3_role_stop(cdns);
>> +
>> + if (role == CDNS3_ROLE_END) {
>> + pm_runtime_put_sync(cdns->dev);
>> + return 0;
>> + }
>> +
>> + dev_dbg(cdns->dev, "Switching role");
>> +
>> + cdns3_set_role(cdns, role);
>> + ret = cdns3_role_start(cdns, role);
>> + if (ret) {
>> + /* Back to current role */
>> + dev_err(cdns->dev, "set %d has failed, back to %d\n",
>> + role, current_role);
>> + cdns3_set_role(cdns, current_role);
>> + ret = cdns3_role_start(cdns, current_role);
>> + }
>> +
>> + pm_runtime_put_sync(cdns->dev);
>> + return ret;
>> +}
>> +
>> +/**
>> + * cdns3_role_switch - work queue handler for role switch
>> + *
>> + * @work: work queue item structure
>> + *
>> + * Handles below events:
>> + * - Role switch for dual-role devices
>> + * - CDNS3_ROLE_GADGET <--> CDNS3_ROLE_END for peripheral-only devices
>> + */
>> +static void cdns3_role_switch(struct work_struct *work)
>> +{
>> + struct cdns3 *cdns;
>> + bool device, host;
>> +
>> + cdns = container_of(work, struct cdns3, role_switch_wq);
>> +
>> + //TODO: implements this functions.
>> + //host = cdns3_is_host(cdns);
>> + //device = cdns3_is_device(cdns);
>> + host = 1;
>> + device = 0;
>> +
>> + if (host) {
>> + if (cdns->roles[CDNS3_ROLE_HOST])
>> + cdns3_do_role_switch(cdns, CDNS3_ROLE_HOST);
>> + return;
>> + }
>> +
>> + if (device)
>> + cdns3_do_role_switch(cdns, CDNS3_ROLE_GADGET);
>> + else
>> + cdns3_do_role_switch(cdns, CDNS3_ROLE_END);
>> +}
>
>All role switching code can come as part of DRD driver.
Detecting Host and Device mode can be achieved in different ways depending on platform.
I assume that core.c file is generic part that allow to connect different way of detecting modes.
In my solution I use OTG registers which are part of this controller. But someone can use
extcon to get information about mode e.g:
host = extcon_get_state(cdns->extcon, EXTCON_USB_HOST);
device = extcon_get_state(cdns->extcon, EXTCON_USB);
I treat drd.c file rather as platform specific extension for this driver.
>> +
>> +/**
>> + * cdns3_probe - probe for cdns3 core device
>> + * @pdev: Pointer to cdns3 core platform device
>> + *
>> + * Returns 0 on success otherwise negative errno
>> + */
>> +static int cdns3_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct resource *res;
>> + struct cdns3 *cdns;
>> + void __iomem *regs;
>> + int ret;
>> +
>> + cdns = devm_kzalloc(dev, sizeof(*cdns), GFP_KERNEL);
>> + if (!cdns)
>> + return -ENOMEM;
>> +
>> + cdns->dev = dev;
>> +
>> + platform_set_drvdata(pdev, cdns);
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
>> + if (!res) {
>> + dev_err(dev, "missing IRQ\n");
>> + return -ENODEV;
>> + }
>> + cdns->irq = res->start;
>> +
>> + /*
>> + * Request memory region
>> + * region-0: xHCI
>> + * region-1: Peripheral
>> + * region-2: OTG registers
>> + */
>
>Here you are not checking for Kconfig options before getting resources which is the right thing.
>However this will be broken if you don't get rid of the Kconfig checks when you populate the
>resources in patch 1.
Ok, patch 1 will be changed.
>
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + regs = devm_ioremap_resource(dev, res);
>> +
>> + if (IS_ERR(regs))
>> + return PTR_ERR(regs);
>> + cdns->xhci_regs = regs;
>> + cdns->xhci_res = res;
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
>> + regs = devm_ioremap_resource(dev, res);
>> + if (IS_ERR(regs))
>> + return PTR_ERR(regs);
>> + cdns->dev_regs = regs;
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
>> + regs = devm_ioremap_resource(dev, res);
>> + if (IS_ERR(regs))
>> + return PTR_ERR(regs);
>> + cdns->otg_regs = regs;
>> +
>> + mutex_init(&cdns->mutex);
>> +
>> + ret = cdns3_core_init_role(cdns);
>> + if (ret)
>> + goto err2;
>> +
>> + INIT_WORK(&cdns->role_switch_wq, cdns3_role_switch);
>> + if (ret)
>> + goto err3;
>> +
>> + if (ret)
>> + goto err3;
>> +
>> + cdns->role = cdns3_get_role(cdns);
>> + cdns3_set_role(cdns, cdns->role);
>> + ret = cdns3_role_start(cdns, cdns->role);
>> + if (ret) {
>> + dev_err(dev, "can't start %s role\n", cdns3_role(cdns)->name);
>> + goto err3;
>> + }
>
>What exactly does role_start have to do?
Start the Device or Host mode. After this operation device/host can handle interrupts.
>Can you start the role before requesting irq?
A good point.
It's works correct, but I will change this.
It's look strange.
>
>> +
>> + ret = devm_request_irq(dev, cdns->irq, cdns3_irq, IRQF_SHARED,
>> + dev_name(dev), cdns);
>> +
>> + if (ret)
>> + goto err4;
>> +
>> + device_set_wakeup_capable(dev, true);
>> + pm_runtime_set_active(dev);
>> + pm_runtime_enable(dev);
>> +
>> + /*
>> + * The controller needs less time between bus and controller suspend,
>> + * and we also needs a small delay to avoid frequently entering low
>> + * power mode.
>> + */
>> + pm_runtime_set_autosuspend_delay(dev, 20);
>> + pm_runtime_mark_last_busy(dev);
>> + pm_runtime_use_autosuspend(dev);
>> + dev_dbg(dev, "Cadence USB3 core: probe succeed\n");
>> +
>> + return 0;
>> +
>> +err4:
>> + cdns3_role_stop(cdns);
>> +err3:
>> + cdns3_remove_roles(cdns);
>> +err2:
>> + return ret;
>> +}
>> +
>> +/**
>> + * cdns3_remove - unbind drd driver and clean up
>> + * @pdev: Pointer to Linux platform device
>> + *
>> + * Returns 0 on success otherwise negative errno
>> + */
>> +static int cdns3_remove(struct platform_device *pdev)
>> +{
>> + struct cdns3 *cdns = platform_get_drvdata(pdev);
>> +
>> + pm_runtime_get_sync(&pdev->dev);
>> + pm_runtime_disable(&pdev->dev);
>> + pm_runtime_put_noidle(&pdev->dev);
>> + cdns3_remove_roles(cdns);
>
>Shouldn't the order be
>
>pm_runtime_get_sync();
>cdns3_remove_roles();
>pm_runtime_put_noidle();
>pm_runtime_disable();
>
>> + usb_phy_shutdown(cdns->usbphy);
>you didn't call usb_phy_init() anywhere.
>
Yes, I found it too. In next series this will be removed.
Also, I will add the phy initialization, but I want to use generic phy instead of usb_phy.
I'm not sure whether it is proper solution, but we have only generic simple phy driver.
>> +
>> + return 0;
>> +}
>> +
>> +static struct platform_driver cdns3_driver = {
>> + .probe = cdns3_probe,
>> + .remove = cdns3_remove,
>> + .driver = {
>> + .name = "cdns-usb3",
>> + },
>> +};
>> +
>> +static int __init cdns3_driver_platform_register(void)
>> +{
>> + cdns3_host_driver_init();
>
>Why is a call to host_driver_init() required?
>
>> + return platform_driver_register(&cdns3_driver);
>> +}
>> +module_init(cdns3_driver_platform_register);
>> +
>> +static void __exit cdns3_driver_platform_unregister(void)
>> +{
>> + platform_driver_unregister(&cdns3_driver);
>> +}
>> +module_exit(cdns3_driver_platform_unregister);
>> +
>> +MODULE_ALIAS("platform:cdns3");
>> +MODULE_AUTHOR("Pawel Laszczak <pawell@xxxxxxxxxxx>");
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_DESCRIPTION("Cadence USB3 DRD Controller Driver");
>> diff --git a/drivers/usb/cdns3/core.h b/drivers/usb/cdns3/core.h
>> new file mode 100644
>> index 000000000000..e7159c474308
>> --- /dev/null
>> +++ b/drivers/usb/cdns3/core.h
>> @@ -0,0 +1,88 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * Cadence USBSS DRD Driver.
>> + *
>> + * Copyright (C) 2017 NXP
>> + * Copyright (C) 2018 Cadence.
>> + *
>> + * Authors: Peter Chen <peter.chen@xxxxxxx>
>> + * Pawel Laszczak <pawell@xxxxxxxxxxx>
>> + */
>> +#include <linux/usb/otg.h>
>> +
>> +#ifndef __LINUX_CDNS3_CORE_H
>> +#define __LINUX_CDNS3_CORE_H
>> +
>> +struct cdns3;
>> +enum cdns3_roles {
>> + CDNS3_ROLE_HOST = 0,
>> + CDNS3_ROLE_GADGET,
>> + CDNS3_ROLE_END,
>> + CDNS3_ROLE_OTG,
>
>Why is OTG after END?
>Does OTG have a role driver as well? If not it must not come here. It is a mode, not a role.
No OTG doesn't have role driver.
It was the simplest solution. It's used only in debugfs.c and drd.c files.
I'll give it some thought how to change it without big impact to rest codes.
>> +};
>> +
>> +/**
>> + * struct cdns3_role_driver - host/gadget role driver
>> + * @start: start this role
>> + * @stop: stop this role
>> + * @suspend: suspend callback for this role
>> + * @resume: resume callback for this role
>> + * @irq: irq handler for this role
>> + * @name: role name string (host/gadget)
>> + */
>> +struct cdns3_role_driver {
>> + int (*start)(struct cdns3 *cdns);
>> + void (*stop)(struct cdns3 *cdns);
>> + int (*suspend)(struct cdns3 *cdns, bool do_wakeup);
>> + int (*resume)(struct cdns3 *cdns, bool hibernated);
>> + irqreturn_t (*irq)(struct cdns3 *cdns);
>> + const char *name;
>> +};
>> +
>> +#define CDNS3_NUM_OF_CLKS 5
>> +/**
>> + * struct cdns3 - Representation of Cadence USB3 DRD controller.
>> + * @dev: pointer to Cadence device struct
>> + * @xhci_regs: pointer to base of xhci registers
>> + * @xhci_res: the resource for xhci
>> + * @dev_regs: pointer to base of dev registers
>> + * @otg_regs: pointer to base of otg registers
>> + * @irq: irq number for controller
>> + * @roles: array of supported roles for this controller
>> + * @role: current role
>> + * @host_dev: the child host device pointer for cdns3 core
>> + * @gadget_dev: the child gadget device pointer for cdns3 core
>> + * @usbphy: usbphy for this controller
>> + * @role_switch_wq: work queue item for role switch
>> + * @in_lpm: the controller in low power mode
>> + * @wakeup_int: the wakeup interrupt
>> + * @mutex: the mutex for concurrent code at driver
>> + * @dr_mode: requested mode of operation
>> + * @current_dr_role: current role of operation when in dual-role mode
>> + * @desired_dr_role: desired role of operation when in dual-role mode
>> + * @root: debugfs root folder pointer
>> + */
>> +struct cdns3 {
>> + struct device *dev;
>> + void __iomem *xhci_regs;
>> + struct resource *xhci_res;
>> + struct cdns3_usb_regs __iomem *dev_regs;
>> + struct cdns3_otg_regs *otg_regs;
>> + int irq;
>> + struct cdns3_role_driver *roles[CDNS3_ROLE_END];
>> + enum cdns3_roles role;
>> + struct device *host_dev;
>> + struct device *gadget_dev;
>> + struct usb_phy *usbphy;
>> + struct work_struct role_switch_wq;
>> + int in_lpm:1;
>> + int wakeup_int:1;
>> + /* mutext used in workqueue*/
>> + struct mutex mutex;
>> + enum usb_dr_mode dr_mode;
>> + enum usb_dr_mode current_dr_mode;
>> + enum usb_dr_mode desired_role;
>> + struct dentry *root;
>> +};
>> +
>> +#endif /* __LINUX_CDNS3_CORE_H */
>> diff --git a/drivers/usb/cdns3/gadget-export.h b/drivers/usb/cdns3/gadget-export.h
>> new file mode 100644
>> index 000000000000..257e5e0eef31
>> --- /dev/null
>> +++ b/drivers/usb/cdns3/gadget-export.h
>> @@ -0,0 +1,27 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * Cadence USBSS DRD Driver -Gadget Export APIs
>> + *
>> + * Copyright (C) 2017 NXP
>> + *
>> + * Authors: Peter Chen <peter.chen@xxxxxxx>
>> + */
>> +#ifndef __LINUX_CDNS3_GADGET_EXPORT
>> +#define __LINUX_CDNS3_GADGET_EXPORT
>> +
>> +#ifdef CONFIG_USB_CDNS3_GADGET
>> +
>> +int cdns3_gadget_init(struct cdns3 *cdns);
>> +void cdns3_gadget_remove(struct cdns3 *cdns);
>> +#else
>> +
>> +static inline int cdns3_gadget_init(struct cdns3 *cdns)
>> +{
>> + return -ENXIO;
>> +}
>> +
>> +static inline void cdns3_gadget_remove(struct cdns3 *cdns) { }
>> +
>> +#endif
>> +
>> +#endif /* __LINUX_CDNS3_GADGET_EXPORT */
>> diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c
>> new file mode 100644
>> index 000000000000..41ce696719d7
>> --- /dev/null
>> +++ b/drivers/usb/cdns3/gadget.c
>> @@ -0,0 +1,36 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Cadence USBSS DRD Driver - gadget side.
>> + *
>> + * Copyright (C) 2018 Cadence Design Systems.
>> + * Copyright (C) 2017 NXP
>> + *
>> + * Authors: Pawel Jez <pjez@xxxxxxxxxxx>,
>> + * Pawel Laszczak <pawell@xxxxxxxxxxx>
>> + * Peter Chen <peter.chen@xxxxxxx>
>> + */
>> +
>> +#include "core.h"
>> +
>> +/**
>> + * cdns3_gadget_remove: parent must call this to remove UDC
>> + *
>> + * cdns: cdns3 instance
>> + */
>> +void cdns3_gadget_remove(struct cdns3 *cdns)
>> +{
>> + //TODO: implements this function
>> +}
>> +
>> +/**
>> + * cdns3_gadget_init - initialize device structure
>> + *
>> + * cdns: cdns3 instance
>> + *
>> + * This function initializes the gadget.
>> + */
>> +int cdns3_gadget_init(struct cdns3 *cdns)
>> +{
>> + //TODO: implements this function
>> + return 0;
>> +}
>> diff --git a/drivers/usb/cdns3/host-export.h b/drivers/usb/cdns3/host-export.h
>> new file mode 100644
>> index 000000000000..f8f3b230b472
>> --- /dev/null
>> +++ b/drivers/usb/cdns3/host-export.h
>> @@ -0,0 +1,30 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * Cadence USBSS DRD Driver -Host Export APIs
>> + *
>> + * Copyright (C) 2017 NXP
>> + *
>> + * Authors: Peter Chen <peter.chen@xxxxxxx>
>> + */
>> +#ifndef __LINUX_CDNS3_HOST_EXPORT
>> +#define __LINUX_CDNS3_HOST_EXPORT
>> +
>> +#ifdef CONFIG_USB_CDNS3_HOST
>> +
>> +int cdns3_host_init(struct cdns3 *cdns);
>> +void cdns3_host_remove(struct cdns3 *cdns);
>> +void cdns3_host_driver_init(void);
>
>why is cdns3_host_driver_init() required?
It's initialize xhci driver with. Maybe
static const struct xhci_driver_overrides xhci_cdns3_overrides __initconst = {
.extra_priv_size = sizeof(struct xhci_hcd),
.reset = xhci_cdns3_setup,
};
void __init cdns3_host_driver_init(void)
{
xhci_init_driver(&xhci_cdns3_hc_driver, &xhci_cdns3_overrides);
}
I will move this function to 0005-usb-cdns3-Added-Wrapper-to-XCHI-driver.patch then all code will be in this some patch.
>
>> +
>> +#else
>> +
>> +static inline int cdns3_host_init(struct cdns3 *cdns)
>> +{
>> + return -ENXIO;
>> +}
>> +
>> +static inline void cdns3_host_remove(struct cdns3 *cdns) { }
>> +static inline void cdns3_host_driver_init(void) {}
>> +
>> +#endif /* CONFIG_USB_CDNS3_HOST */
>> +
>> +#endif /* __LINUX_CDNS3_HOST_EXPORT */
>> diff --git a/drivers/usb/cdns3/host.c b/drivers/usb/cdns3/host.c
>> new file mode 100644
>> index 000000000000..37300985e2d6
>> --- /dev/null
>> +++ b/drivers/usb/cdns3/host.c
>> @@ -0,0 +1,28 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Cadence USBSS DRD Driver - host side
>> + *
>> + * Copyright (C) 2018 Cadence Design Systems.
>> + * Copyright (C) 2018 NXP
>> + *
>> + * Authors: Peter Chen <peter.chen@xxxxxxx>
>> + * Pawel Laszczak <pawell@xxxxxxxxxxx>
>> + */
>> +
>> +#include "core.h"
>> +
>> +int cdns3_host_init(struct cdns3 *cdns)
>> +{
>> + //TODO: implements this function
>> + return 0;
>> +}
>> +
>> +void cdns3_host_remove(struct cdns3 *cdns)
>> +{
>> + //TODO: implements this function
>> +}
>> +
>> +void __init cdns3_host_driver_init(void)
>> +{
>> + //TODO: implements this function
>> +}
>>
>
>cheers,
>-roger
>--
>Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
>Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Thanks for all comment,
Regards,
Pawel Laszczak.
